Determining the Impact of Steady-State PV Fault Current Injections on Distribution Protection

Technical Report · Mon May 01 04:00:00 EDT 2017

DOI:https://doi.org/10.2172/1367427· OSTI ID:1367427

Seuss, John ^[1]; Reno, Matthew J. ^[1]; Broderick, Robert Joseph ^[1]; Grijalva, Santiago ^[1]

---

1. Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

This report investigates the fault current contribution from a single large PV system and the impact it has on existing distribution overcurrent protection devices. Assumptions are made about the modeling of the PV system under fault to perform exhaustive steady - state fault analyses throughout distribution feeder models. Each PV interconnection location is tested to determine how the size of the PV system affects the fault current measured by each protection device. This data is then searched for logical conditions that indicate whether a protection device has operated in a manner that will cause more customer outages due to the addition of the PV system. This is referred to as a protection issue , and there are four unique types of issues that have been identified in the study. The PV system size at which any issues occur are recorded to determine the feeder's PV hosting capacity limitations due to interference with protection settings. The analysis is carried out on six feeder models. The report concludes with a discussion of the prevalence and cause of each protection issue caused by PV system fault current.

• Research Organization: Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)
• Sponsoring Organization: USDOE National Nuclear Security Administration (NNSA)
• DOE Contract Number: AC04-94AL85000
• OSTI ID: 1367427
• Report Number(s): SAND2017-4955; 653195
• Country of Publication: United States
• Language: English

Related Subjects

30 DIRECT ENERGY CONVERSION