Field-gradient partitioning for fracture and frictional contact in the material point method: Field-gradient partitioning for fracture and frictional contact in the material point method [Fracture and frictional contact in material point method using damage-field gradients for velocity-field partitioning]

Homel, Michael A.; Herbold, Eric B.

doi:10.1002/nme.5317

Field-gradient partitioning for fracture and frictional contact in the material point method: Field-gradient partitioning for fracture and frictional contact in the material point method [Fracture and frictional contact in material point method using damage-field gradients for velocity-field partitioning]

Journal Article · Mon Aug 15 00:00:00 EDT 2016 · International Journal for Numerical Methods in Engineering

DOI:https://doi.org/10.1002/nme.5317· OSTI ID:1366949

Homel, Michael A. ^[1]; Herbold, Eric B. ^[1]

Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Computational Geosciences Group

Contact and fracture in the material point method require grid-scale enrichment or partitioning of material into distinct velocity fields to allow for displacement or velocity discontinuities at a material interface. We present a new method which a kernel-based damage field is constructed from the particle data. The gradient of this field is used to dynamically repartition the material into contact pairs at each node. Our approach avoids the need to construct and evolve explicit cracks or contact surfaces and is therefore well suited to problems involving complex 3-D fracture with crack branching and coalescence. A straightforward extension of this approach permits frictional ‘self-contact’ between surfaces that are initially part of a single velocity field, enabling more accurate simulation of granular flow, porous compaction, fragmentation, and comminution of brittle materials. Finally, numerical simulations of self contact and dynamic crack propagation are presented to demonstrate the accuracy of the approach.

View Accepted Manuscript (DOE)

Research Organization:: Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC52-07NA27344

OSTI ID:: 1366949

Alternate ID(s):: OSTI ID: 1401689

Report Number(s):: LLNL-JRNL--679544

Journal Information:: International Journal for Numerical Methods in Engineering, Journal Name: International Journal for Numerical Methods in Engineering Journal Issue: 7 Vol. 109; ISSN 0029-5981

Publisher:: WileyCopyright Statement

Country of Publication:: United States

Language:: English

References (52)

Scalable large-scale fluid-structure interaction solvers in the Uintah framework via hybrid task-based parallelism algorithms: UINTAH HYBRID TASK-BASED PARALLELISM ALGORITHMS Meng, Qingyu; Berzins, Martin Concurrency and Computation: Practice and Experience, Vol. 26, Issue 7 https://doi.org/10.1002/cpe.3099	journal	July 2013
Reproducing kernel particle methods Liu, Wing Kam; Jun, Sukky; Zhang, Yi Fei International Journal for Numerical Methods in Fluids, Vol. 20, Issue 8-9 https://doi.org/10.1002/fld.1650200824	journal	April 1995
Modelling and simulation of high-speed machining Marusich, T. D.; Ortiz, M. International Journal for Numerical Methods in Engineering, Vol. 38, Issue 21 https://doi.org/10.1002/nme.1620382108	journal	November 1995
Failure of heterogeneous materials: 3D meso-scale FE models with embedded discontinuities: 3D FAILURE MODEL OF HETEROGENEOUS MATERIALS Benkemoun, N.; Hautefeuille, M.; Colliat, J. -B. International Journal for Numerical Methods in Engineering, Vol. 82, Issue 13 https://doi.org/10.1002/nme.2816	journal	February 2010
Contact algorithms for the material point method in impact and penetration simulation Huang, P.; Zhang, X.; Ma, S. International Journal for Numerical Methods in Engineering, Vol. 85, Issue 4 https://doi.org/10.1002/nme.2981	journal	December 2010
A convected particle domain interpolation technique to extend applicability of the material point method for problems involving massive deformations Sadeghirad, A.; Brannon, R. M.; Burghardt, J. International Journal for Numerical Methods in Engineering, Vol. 86, Issue 12 https://doi.org/10.1002/nme.3110	journal	March 2011
Second-order convected particle domain interpolation (CPDI2) with enrichment for weak discontinuities at material interfaces: ENRICHED SECOND-ORDER CONVECTED PARTICLE DOMAIN INTERPOLATION (CPDI2) Sadeghirad, A.; Brannon, R. M.; Guilkey, J. E. International Journal for Numerical Methods in Engineering, Vol. 95, Issue 11 https://doi.org/10.1002/nme.4526	journal	July 2013
Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment Belytschko, Ted; Chen, Hao; Xu, Jingxiao International Journal for Numerical Methods in Engineering, Vol. 58, Issue 12 https://doi.org/10.1002/nme.941	journal	January 2003
Computational Contact Mechanics Wriggers, Peter https://doi.org/10.1007/978-3-540-32609-0	book	January 2006
Statistical approach to brittle fracture Jayatilaka, A. De S.; Trustrum, K. Journal of Materials Science, Vol. 12, Issue 7 https://doi.org/10.1007/BF00540858	journal	July 1977
Verification tests in solid mechanics Kamojjala, K.; Brannon, R.; Sadeghirad, A. Engineering with Computers, Vol. 31, Issue 2 https://doi.org/10.1007/s00366-013-0342-x	journal	November 2013
A comparative study on finite element methods for dynamic fracture Song, Jeong-Hoon; Wang, Hongwu; Belytschko, Ted Computational Mechanics, Vol. 42, Issue 2 https://doi.org/10.1007/s00466-007-0210-x	journal	August 2007
Simulation of dynamic crack growth using the generalized interpolation material point (GIMP) method Daphalapurkar, Nitin P.; Lu, Hongbing; Coker, Demir International Journal of Fracture, Vol. 143, Issue 1 https://doi.org/10.1007/s10704-007-9051-z	journal	February 2007
Length scales and size distributions in dynamic fragmentation Grady, Dennis E. International Journal of Fracture, Vol. 163, Issue 1-2 https://doi.org/10.1007/s10704-009-9418-4	journal	November 2009
Experimental Observations on Dynamic Response of Selected Transparent Armor Materials McCauley, J. W.; Strassburger, E.; Patel, P. Experimental Mechanics, Vol. 53, Issue 1 https://doi.org/10.1007/s11340-012-9658-5	journal	August 2012
Application of a particle-in-cell method to solid mechanics Sulsky, Deborah; Zhou, Shi-Jian; Schreyer, Howard L. Computer Physics Communications, Vol. 87, Issue 1-2 https://doi.org/10.1016/0010-4655(94)00170-7	journal	May 1995
Impact ejection, spallation, and the origin of meteorites Melosh, H. J. Icarus, Vol. 59, Issue 2 https://doi.org/10.1016/0019-1035(84)90026-5	journal	August 1984
The mechanics of penetration of projectiles into targets Backman, Marvin E.; Goldsmith, Werner International Journal of Engineering Science, Vol. 16, Issue 1 https://doi.org/10.1016/0020-7225(78)90002-2	journal	January 1978
Computational modelling of impact damage in brittle materials Camacho, G. T.; Ortiz, M. International Journal of Solids and Structures, Vol. 33, Issue 20-22 https://doi.org/10.1016/0020-7683(95)00255-3	journal	August 1996
The dynamic fracture and prefracture response of compact bone by split Hopkinson bar methods Lewis, J. L.; Goldsmith, W. Journal of Biomechanics, Vol. 8, Issue 1 https://doi.org/10.1016/0021-9290(75)90040-8	journal	January 1975
A particle method for history-dependent materials Sulsky, D.; Chen, Z.; Schreyer, H. L. Computer Methods in Applied Mechanics and Engineering, Vol. 118, Issue 1-2 https://doi.org/10.1016/0045-7825(94)90112-0	journal	September 1994
Linear octtrees for fast processing of three-dimensional objects Gargantini, Irene Computer Graphics and Image Processing, Vol. 20, Issue 4 https://doi.org/10.1016/0146-664X(82)90058-2	journal	December 1982
The material-point method for granular materials Bardenhagen, S. G.; Brackbill, J. U.; Sulsky, D. Computer Methods in Applied Mechanics and Engineering, Vol. 187, Issue 3-4 https://doi.org/10.1016/S0045-7825(99)00338-2	journal	July 2000
Meso-scale computational modeling of the plastic-damage response of cementitious composites Kim, Sun-Myung; Abu Al-Rub, Rashid K. Cement and Concrete Research, Vol. 41, Issue 3 https://doi.org/10.1016/j.cemconres.2010.12.002	journal	March 2011
Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique Cervera, M.; Chiumenti, M. Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issue 1-3 https://doi.org/10.1016/j.cma.2006.04.008	journal	December 2006
A nonlocal plasticity formulation for the material point method Burghardt, J.; Brannon, R.; Guilkey, J. Computer Methods in Applied Mechanics and Engineering, Vol. 225-228 https://doi.org/10.1016/j.cma.2012.03.007	journal	June 2012
Mesoscale models for concrete: Homogenisation and damage behaviour Wriggers, P.; Moftah, S. O. Finite Elements in Analysis and Design, Vol. 42, Issue 7 https://doi.org/10.1016/j.finel.2005.11.008	journal	April 2006
A large deformation breakage model of granular materials including porosity and inelastic distortional deformation rate Rubin, M. B.; Einav, I. International Journal of Engineering Science, Vol. 49, Issue 10 https://doi.org/10.1016/j.ijengsci.2011.05.002	journal	October 2011
Time-resolved penetration into pre-damaged hot-pressed silicon carbide Anderson, Charles E.; Behner, Thilo; Orphal, Dennis L. International Journal of Impact Engineering, Vol. 35, Issue 8 https://doi.org/10.1016/j.ijimpeng.2007.12.003	journal	August 2008
Experimental assessment of fracture of individual sand particles at different loading rates Parab, Niranjan D.; Claus, Benjamin; Hudspeth, Matthew C. International Journal of Impact Engineering, Vol. 68 https://doi.org/10.1016/j.ijimpeng.2014.01.003	journal	June 2014
Generic strength model for dry jointed rock masses Vorobiev, Oleg International Journal of Plasticity, Vol. 24, Issue 12 https://doi.org/10.1016/j.ijplas.2008.06.009	journal	December 2008
An evaluation of explicit time integration schemes for use with the generalized interpolation material point method Wallstedt, P. C.; Guilkey, J. E. Journal of Computational Physics, Vol. 227, Issue 22 https://doi.org/10.1016/j.jcp.2008.07.019	journal	November 2008
Fast free-surface detection and level-set function definition in SPH solvers Marrone, S.; Colagrossi, A.; Le Touzé, D. Journal of Computational Physics, Vol. 229, Issue 10 https://doi.org/10.1016/j.jcp.2010.01.019	journal	May 2010
An interacting micro-crack damage model for failure of brittle materials under compression Paliwal, B.; Ramesh, K. T. Journal of the Mechanics and Physics of Solids, Vol. 56, Issue 3 https://doi.org/10.1016/j.jmps.2007.06.012	journal	March 2008
Multi-scale defect interactions in high-rate failure of brittle materials, Part II: Application to design of protection materials Tonge, Andrew L.; Ramesh, K. T. Journal of the Mechanics and Physics of Solids, Vol. 86 https://doi.org/10.1016/j.jmps.2015.10.006	journal	January 2016
Influence of Mechanical Properties Relevant to Standoff Deflection of Hazardous Asteroids Lomov, Ilya; Herbold, Eric B.; Antoun, Tarabay H. Procedia Engineering, Vol. 58 https://doi.org/10.1016/j.proeng.2013.05.029	journal	January 2013
A Consistent Scaling Framework for Simulating High Rate Brittle Failure Problems Tonge, Andrew L.; Kimberley, Jamie; Ramesh, K. T. Procedia Engineering, Vol. 58 https://doi.org/10.1016/j.proeng.2013.05.080	journal	January 2013
A review of mechanisms and models for dynamic failure, strength, and fragmentation Ramesh, K. T.; Hogan, James D.; Kimberley, Jamie Planetary and Space Science, Vol. 107 https://doi.org/10.1016/j.pss.2014.11.010	journal	March 2015
Nonlinear Elasticity Fu, Y. B.; Ogden, R. W. Cambridge University Press https://doi.org/10.1017/CBO9780511526466	book	May 2001
Confirming the continuum theory of dynamic brittle fracture for fast cracks Sharon, Eran; Fineberg, Jay Nature, Vol. 397, Issue 6717 https://doi.org/10.1038/16891	journal	January 1999
Dynamics of a Projectile Penetrating Sand Allen, William A.; Mayfield, Earle B.; Morrison, Harvey L. Journal of Applied Physics, Vol. 28, Issue 3 https://doi.org/10.1063/1.1722750	journal	March 1957
Two dimensional mesoscale simulations of projectile instability during penetration in dry sand Dwivedi, S. K.; Teeter, R. D.; Felice, C. W. Journal of Applied Physics, Vol. 104, Issue 8 https://doi.org/10.1063/1.2999391	journal	October 2008
Local inertial effects in dynamic fragmentation Grady, D. E. Journal of Applied Physics, Vol. 53, Issue 1, p. 322-325 https://doi.org/10.1063/1.329934	journal	January 1982
An improved computational constitutive model for brittle materials Johnson, Gordon R.; Holmquist, Tim J. High-pressure science and technology—1993, AIP Conference Proceedings https://doi.org/10.1063/1.46199	conference	January 1994
Numerical Modeling of the Disruption of Comet D/1993 f2 Shoemaker-Levy 9 Representing the Progenitor by a Gravitationally Bound Assemblage of Randomly Shaped Polyhedra Movshovitz, Naor; Asphaug, Erik; Korycansky, Donald The Astrophysical Journal, Vol. 759, Issue 2 https://doi.org/10.1088/0004-637X/759/2/93	journal	October 2012
Smoothed particle hydrodynamics Monaghan, J. J. Reports on Progress in Physics, Vol. 68, Issue 8 https://doi.org/10.1088/0034-4885/68/8/R01	journal	July 2005
Transition in the Failure Behavior of Dynamically Shear Loaded Cracks Kalthoff, J. F. Applied Mechanics Reviews, Vol. 43, Issue 5S https://doi.org/10.1115/1.3120818	journal	May 1990
Continuum Damage Mechanics: Part II—Damage Growth, Crack Initiation, and Crack Growth Chaboche, J. L. Journal of Applied Mechanics, Vol. 55, Issue 1 https://doi.org/10.1115/1.3173662	journal	March 1988
A Statistical Distribution Function of Wide Applicability Weibull, Waloddi Journal of Applied Mechanics, Vol. 18, Issue 3 https://doi.org/10.1115/1.4010337	journal	September 1951
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices Meza, L. R.; Das, S.; Greer, J. R. Science, Vol. 345, Issue 6202 https://doi.org/10.1126/science.1255908	journal	September 2014
Chelyabinsk superbolide explosion in the Earth’s atmosphere: A common phenomenon or unique coincidence? Fortov, V. E.; Sultanov, V. G.; Shutov, A. V. Geochemistry International, Vol. 51, Issue 7 https://doi.org/10.1134/S0016702913070094	journal	July 2013
Historical review of high strain rate and shock properties of ceramics relevant to their application in armour Walley, S. M. Advances in Applied Ceramics, Vol. 109, Issue 8 https://doi.org/10.1179/174367609X422180	journal	November 2010

Cited By (7)

Phase-field material point method for brittle fracture: Phase-Field Material Point Method for Brittle Fracture Kakouris, E. G.; Triantafyllou, S. P. International Journal for Numerical Methods in Engineering, Vol. 112, Issue 12 https://doi.org/10.1002/nme.5580	journal	August 2017
An adaptive material point method coupled with a phase‐field fracture model for brittle materials Cheon, Young‐Jo; Kim, Hyun‐Gyu International Journal for Numerical Methods in Engineering, Vol. 120, Issue 8 https://doi.org/10.1002/nme.6167	journal	July 2019
A convected particle least square interpolation material point method Tran, Quoc Anh; Sołowski, Wojciech; Berzins, Martin International Journal for Numerical Methods in Engineering, Vol. 121, Issue 6 https://doi.org/10.1002/nme.6257	journal	November 2019
Material point method for crack propagation in anisotropic media: a phase field approach Kakouris, E. G.; Triantafyllou, S. P. Archive of Applied Mechanics, Vol. 88, Issue 1-2 https://doi.org/10.1007/s00419-017-1272-7	journal	July 2017
A convected-particle tetrahedron interpolation technique in the material-point method for the mesoscale modeling of ceramics Leavy, R. B.; Guilkey, J. E.; Phung, B. R. Computational Mechanics, Vol. 64, Issue 3 https://doi.org/10.1007/s00466-019-01670-x	journal	February 2019
Investigation of influence of baffles on landslide debris mobility by 3D material point method Li, Xinpo; Yan, Qiwei; Zhao, Shuxi Landslides, Vol. 17, Issue 5 https://doi.org/10.1007/s10346-020-01346-1	journal	January 2020
In situ X-ray imaging of heterogeneity in dynamic compaction of granular media Crum, R. S.; Homel, M. A.; Pagan, D. C. Journal of Applied Physics, Vol. 125, Issue 2 https://doi.org/10.1063/1.5057713	journal	January 2019

Similar Records

Modeling strong discontinuities in the material point method using a single velocity field

Journal Article · Sun Nov 18 23:00:00 EST 2018 · Computer Methods in Applied Mechanics and Engineering · OSTI ID:1484659

Problems of dynamic fracture mechanics without contact of the crack faces

Journal Article · Fri Mar 31 23:00:00 EST 1995 · International Applied Mechanics · OSTI ID:379119

Related Subjects

97 MATHEMATICS AND COMPUTING
CPDI
comminution
contact
continuum damage
cracks
fracture
fragmentation
friction
material point method (MPM)
mesoscale modeling

Citation Formats

References (52)

Cited By (7)

Similar Records

Related Subjects