Fabrication of oxide dispersion strengthened bond coats with low Al2O3 content [Fabrication of ODS bond coats with low Al2O3 content]

Bergholz, Jan; Pint, Bruce A.; Unocic, Kinga A.; VaBen, Robert

doi:10.1007/s11666-017-0550-9

Title: Fabrication of oxide dispersion strengthened bond coats with low Al₂O₃ content [Fabrication of ODS bond coats with low Al₂O₃ content]

Journal Article · Thu Mar 23 00:00:00 EDT 2017 · Journal of Thermal Spray Technology

DOI:https://doi.org/10.1007/s11666-017-0550-9· OSTI ID:1366405

Bergholz, Jan ^[1]; Pint, Bruce A. ^[2]; Unocic, Kinga A. ^[2]; VaBen, Robert ^[1]

Forschungszentrum Julich GmbH, Julich (Germany)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Here, nanoscale oxide dispersions have long been used to increase the oxidation and wear resistance of alloys used as bond coatings in thermal barrier coatings. Their manufacturing via mechanical alloying is often accompanied by difficulties regarding their particle size, homogeneous distribution of the oxide dispersions inside the powder, involving considerable costs, due to cold welding of the powder during milling. A significant improvement in this process can be achieved by the use of process control agent (PCA) to achieve the critical balance between cold welding and fracturing, thereby enhancing the process efficiency. In this investigation, the influence of the organic additive stearic acid on the manufacturing process of Al₂O₃-doped CoNiCrAlY powder was investigated. Powders were fabricated via mechanical alloying at different milling times and PCA concentrations. The results showed a decrease in particle size, without hindering the homogeneous incorporation of the oxide dispersions. Two powders manufactured with 0.5 and 1.0 wt.% PCA were deposited by high velocity oxygen fuel (HVOF) spraying. Results showed that a higher content of elongated particles in the powder with the higher PCA content led to increased surface roughness, porosity and decreased coating thickness, with areas without embedded oxide particles.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Nuclear Science User Facility (NSUF)

Sponsoring Organization:: USDOE Office of Fossil Energy (FE)

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1366405

Journal Information:: Journal of Thermal Spray Technology, Vol. 26, Issue 5; ISSN 1059-9630

Publisher:: SpringerCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 23 works

Citation information provided by
Web of Science

References (35)

Influence of cryomilling on the microstructural features in HVOF-sprayed NiCrAlY bond coats for thermal barrier coatings: Creation of a homogeneous distribution of nanoscale dispersoids Ma, Kaka; Schoenung, Julie M. Philosophical Magazine Letters, Vol. 90, Issue 10 https://doi.org/10.1080/09500839.2010.506424	journal	July 2010
Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY powder Ajdelsztajn, Leonardo; Picas, Josep A.; Kim, George E. Materials Science and Engineering: A, Vol. 338, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00008-4	journal	December 2002
The addition of a surfactant at regular time intervals in the mechanical alloying process Nazari, Keivan A.; Nouri, Alireza; Hilditch, Tim Journal of Alloys and Compounds, Vol. 615 https://doi.org/10.1016/j.jallcom.2014.06.142	journal	December 2014
Studies of the bond-coat oxidation and phase structure of TBCs Czech, N.; Fietzek, H.; Juez-Lorenzo, M. Surface and Coatings Technology, Vol. 113, Issue 1-2 https://doi.org/10.1016/S0257-8972(98)00835-4	journal	March 1999
Oxidation behavior of mechanically alloyed chromium based alloys Crone, U. v. d.; Hänsel, M.; Quadakkers, W. J. Fresenius' Journal of Analytical Chemistry, Vol. 358, Issue 1-2 https://doi.org/10.1007/s002160050391	journal	May 1997
The effects of process control agents on mechanical alloying mechanisms in the TiAl system Lee, Wonsik; Kwun, S. I. Journal of Alloys and Compounds, Vol. 240, Issue 1-2 https://doi.org/10.1016/0925-8388(96)02224-4	journal	July 1996
Surfactants in Mechanical Alloying/Milling: A Catch-22 Situation Nouri, Alireza; Wen, Cuie Critical Reviews in Solid State and Materials Sciences, Vol. 39, Issue 2 https://doi.org/10.1080/10408436.2013.808985	journal	December 2013
Current status of thermal barrier coatings — An overview Miller, Robert A. Surface and Coatings Technology, Vol. 30, Issue 1 https://doi.org/10.1016/0257-8972(87)90003-X	journal	January 1987
Differences in growth mechanisms of oxide scales formed on ODS and conventional wrought alloys Quadakkers, W. J.; Holzbrecher, H.; Briefs, K. G. Oxidation of Metals, Vol. 32, Issue 1-2 https://doi.org/10.1007/BF00665269	journal	August 1989
Literature Holmberg, Krister; Jonsson, Bo; Kronberg, Bengt Journal of Synthetic Lubrication, Vol. 20, Issue 4, p. 367-370 https://doi.org/10.1002/jsl.3000200408	journal	January 2004
Thermal barrier coatings with a double-layer bond coat on Ni3Al based single-crystal superalloy Zhou, Xin; Xu, Zhenhua; Mu, Rende Journal of Alloys and Compounds, Vol. 591 https://doi.org/10.1016/j.jallcom.2013.12.040	journal	April 2014
The Characteristics of Alumina Scales Formed on HVOF-Sprayed MCrAlY Coatings Toma, D.; Brandl, W.; Köster, U. Oxidation of Metals, Vol. 53, Issue 1/2, p. 125-137 https://doi.org/10.1023/A:1004586814837	journal	January 2000
Effect of process control agent on the porous structure and mechanical properties of a biomedical Ti–Sn–Nb alloy produced by powder metallurgy Nouri, A.; Hodgson, P. D.; Wen, C. E. Acta Biomaterialia, Vol. 6, Issue 4 https://doi.org/10.1016/j.actbio.2009.10.005	journal	April 2010
The use of two reactive elements to optimize oxidation performance of alumina-forming alloys Pint, B. A.; More, K. L.; Wright, I. G. Materials at High Temperatures, Vol. 20, Issue 3 https://doi.org/10.1179/mht.2003.044	journal	January 2003
Composition and growth mechanisms of alumina scales on FeCrAl-based alloys determined by SNMS Quadakkers, W. J.; Elschner, A.; Speier, W. Applied Surface Science, Vol. 52, Issue 4 https://doi.org/10.1016/0169-4332(91)90069-V	journal	December 1991
Y-rich oxide distribution in plasma sprayed MCrAlY-coatings studied by SEM with a cathodoluminescence detector and Raman spectroscopy Gil, A.; Naumenko, D.; Vassen, R. Surface and Coatings Technology, Vol. 204, Issue 4 https://doi.org/10.1016/j.surfcoat.2009.08.034	journal	November 2009
Advances in Coating Design for High-Performance Gas Turbines Nicholls, J. R. MRS Bulletin, Vol. 28, Issue 9 https://doi.org/10.1557/mrs2003.194	journal	September 2003
Dispersion strengthened aluminum made by mechanical alloying Benjamin, J. S.; Bomford, M. J. Metallurgical Transactions A, Vol. 8, Issue 8 https://doi.org/10.1007/BF02643845	journal	August 1977
Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying Richer, P.; Yandouzi, M.; Beauvais, L. Surface and Coatings Technology, Vol. 204, Issue 24 https://doi.org/10.1016/j.surfcoat.2010.03.043	journal	September 2010
Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coatings Ajdelsztajn, Leonardo; Tang, Feng; Kim, George E. Journal of Thermal Spray Technology, Vol. 14, Issue 1 https://doi.org/10.1361/10599630522693	journal	March 2005
Mechanical Properties and Microstructure of VPS and HVOF CoNiCrAlY Coatings Saeidi, S.; Voisey, K. T.; McCartney, D. G. Journal of Thermal Spray Technology, Vol. 20, Issue 6 https://doi.org/10.1007/s11666-011-9666-5	journal	July 2011
Abrasive Wear Resistance of Plasma-Sprayed Glass-Composite Coatings Gawne, D. T.; Qiu, Z.; Bao, Y. Journal of Thermal Spray Technology, Vol. 10, Issue 4 https://doi.org/10.1361/105996301770349114	journal	December 2001
The effect of various oxide dispersions on the phase composition and morphology of Al2O3 scales grown on β-NiAl Pint, B. A.; Treska, M.; Hobbs, L. W. Oxidation of Metals, Vol. 47, Issue 1-2 https://doi.org/10.1007/BF01682369	journal	February 1997
Effects of milling time on powder packing characteristics and compressive mechanical properties of sintered Ti-10Nb-3Mo alloy Nazari, Keivan A.; Nouri, Alireza; Hilditch, Tim Materials Letters, Vol. 140 https://doi.org/10.1016/j.matlet.2014.10.143	journal	February 2015
Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC's Toscano, J.; Vaβen, R.; Gil, A. Surface and Coatings Technology, Vol. 201, Issue 7 https://doi.org/10.1016/j.surfcoat.2006.07.247	journal	December 2006
Thermal barrier coatings for aircraft engines: history and directions Miller, R. A. Journal of Thermal Spray Technology, Vol. 6, Issue 1 https://doi.org/10.1007/BF02646310	journal	March 1997
Current Thoughts on Reactive Element Effects in Alumina-Forming Systems: In Memory of John Stringer Naumenko, D.; Pint, B. A.; Quadakkers, W. J. Oxidation of Metals, Vol. 86, Issue 1-2 https://doi.org/10.1007/s11085-016-9625-0	journal	May 2016
Nanocrystalline NiCrAlY powder synthesis by mechanical cryomilling Picas, J. A.; Forn, A.; Ajdelsztajn, L. Powder Technology, Vol. 148, Issue 1 https://doi.org/10.1016/j.powtec.2004.09.015	journal	October 2004
Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings Wong, W.; Vo, P.; Irissou, E. Journal of Thermal Spray Technology, Vol. 22, Issue 7 https://doi.org/10.1007/s11666-013-9951-6	journal	June 2013
Role of process control agent on synthesis and consolidation behavior of nano-crystalline copper produced by mechano-chemical route Sheibani, S.; Ataie, A.; Heshmati-Manesh, S. Journal of Alloys and Compounds, Vol. 465, Issue 1-2 https://doi.org/10.1016/j.jallcom.2007.10.062	journal	October 2008
The effect of grinding aids on the fine grinding of limestone, quartz and Portland cement clinker Sohoni, S.; Sridhar, R.; Mandal, G. Powder Technology, Vol. 67, Issue 3 https://doi.org/10.1016/0032-5910(91)80109-V	journal	September 1991
Thermal Barrier Coatings for Gas-Turbine Engine Applications Padture, N. P. Science, Vol. 296, Issue 5566 https://doi.org/10.1126/science.1068609	journal	April 2002
Bond coat oxidation and its significance for life expectancy of thermal barrier coating systems Echsler, H.; Renusch, D.; Schütze, M. Materials Science and Technology, Vol. 20, Issue 3 https://doi.org/10.1179/026708304225012143	journal	March 2004
Oxidation and Corrosion of New MCrAlX Coatings: Modelling and Experiments Yuan, Kang DiVA https://doi.org/10.3384/diss.diva-111119	journal	January 2014
Handbuch Hochtemperatur- Werkstofftechnik Bürgel, Ralf; Jürgen Maier, Hans; Niendorf, Thomas Vieweg+Teubner Verlag Wiesbaden https://doi.org/10.1007/978-3-8348-9907-1	book	January 2011

Cited By (1)

Oxide Dispersion Strengthened Bond Coats with Higher Alumina Content: Oxidation Resistance and Influence on Thermal Barrier Coating Lifetime Vorkötter, C.; Hagen, S. P.; Pintsuk, G. Oxidation of Metals, Vol. 92, Issue 3-4 https://doi.org/10.1007/s11085-019-09931-z	journal	July 2019

Similar Records

Fabrication of Al{sub 2}O{sub 3}-20 vol.% Al nanocomposite powders using high energy milling and their sinterability

Journal Article · Thu Mar 15 00:00:00 EDT 2012 · Materials Research Bulletin · OSTI ID:1366405

Abdel-kader, H.; Elbaly, N. E.

High-temperature sulfidation of Fe{sub 3}Al thermal spray coatings at 600 C

Journal Article · Tue Feb 01 00:00:00 EST 2000 · Corrosion (Houston) · OSTI ID:1366405

Luer, K R; DuPont, J N; Marder, A R

High temperature sulfidation of Fe{sub 3}Al and NiCr thermal spray coatings at 600 C

Conference · Mon Nov 01 00:00:00 EST 1999 · OSTI ID:1366405

Luer, K; DuPont, J; Marder, A

Related Subjects

36 MATERIALS SCIENCE
thermal barrier coatings
bond coating
ODS
processing
mechanical alloying
oxide dispersion strengthened
process control agent
thermal spraying

Title: Fabrication of oxide dispersion strengthened bond coats with low Al2O3 content [Fabrication of ODS bond coats with low Al2O3 content]

Citation Formats

References (35)

Cited By (1)

Similar Records

Related Subjects

Title: Fabrication of oxide dispersion strengthened bond coats with low Al₂O₃ content [Fabrication of ODS bond coats with low Al₂O₃ content]