skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Limiter observations during W7-X first plasmas

Journal Article · · Nuclear Fusion

During the first operational phase (referred to as OP1.1) of the new Wendelstein 7-X (W7-X) stellarator, five poloidal graphite limiters were mounted on the inboard side of the vacuum vessel, one in each of the five toroidal modules which form the W7-X vacuum vessel. Each limiter consisted of nine specially shaped graphite tiles, designed to conform to the last closed field line geometry in the bean-shaped section of the standard OP1.1 magnetic field configuration (Sunn Pedersen et al 2015 Nucl. Fusion 55 126001). We observed the limiters with multiple infrared and visible camera systems, as well as filtered photomultipliers. Power loads are calculated from infrared (IR) temperature measurements using THEODOR, and heating patterns (dual stripes) compare well with field line mapping and EMC3-EIRENE predictions. While the poloidal symmetry of the heat loads was excellent, the toroidal heating pattern showed up to a factor of 2× variation, with peak heat loads on Limiter 1. The total power intercepted by the limiters was up to ~60% of the input ECRH heating power. Calorimetry using bulk tile heating (measured via post-shot IR thermography) on Limiter 3 showed a difference between short high power discharges, and longer lower power ones, with regards to the fraction of energy deposited on the limiters. Finally, fast heating transients, with frequency >1 kHz were detected, and their visibility was enhanced by the presence of surface coatings which developed on the limiters by the end of the campaign.

Research Organization:
Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Fusion Energy Sciences (FES)
Contributing Organization:
the W7-X Team
Grant/Contract Number:
AC52-06NA25396; SC0014210; 633053; AC05-00OR22725
OSTI ID:
1349536
Alternate ID(s):
OSTI ID: 1352427; OSTI ID: 1357121; OSTI ID: 1530092
Report Number(s):
LA-UR-16-29457; LA-UR-16-27281
Journal Information:
Nuclear Fusion, Journal Name: Nuclear Fusion Vol. 57 Journal Issue: 5; ISSN 0029-5515
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
IAEA
Language:
English
Citation Metrics:
Cited by: 27 works
Citation information provided by
Web of Science

References (9)

Spectroscopic imaging of limiter heat and particle fluxes and the resulting impurity sources during Wendelstein 7-X startup plasmas journal August 2016
Numerical investigation of plasma edge transport and limiter heat fluxes in Wendelstein 7-X startup plasmas with EMC3-EIRENE journal January 2017
A protection system for the JET ITER-like wall based on imaging diagnostics journal October 2012
Real time capable infrared thermography for ASDEX Upgrade journal November 2015
Overview of diagnostic performance and results for the first operation phase in Wendelstein 7-X (invited) journal October 2016
Plans for the first plasma operation of Wendelstein 7-X journal November 2015
Energy flux to the ASDEX-Upgrade diverter plates determined by thermography and calorimetry journal January 1995
A high resolution IR/visible imaging system for the W7-X limiter journal August 2016
The data acquisition system for the infrared cameras on Tore Supra journal April 2002