Conceptual Design of a Three-Pole Wiggler for the APS Upgrade

Conference · Fri Jul 01 04:00:00 EDT 2016

DOI:https://doi.org/10.1063/1.4952790· OSTI ID:1336947

Abliz, M. ^[1]; Grimmer, J. ^[1]; Dejus, R. ^[1]; Ramanathan, M. ^[1]

---

1. Argonne National Lab. (ANL), Argonne, IL (United States)

The current design of the Advanced Photon Source Upgrade (APS-U) project is a multi-bend achromat (MBA) lattice, which incorporates three-pole wigglers as radiation sources for the bending magnet beamlines. They are located in the short section between the M4 dipole and Q8 quadrupole magnets. Due to space constraints, a hybrid permanent magnet design is necessary to provide the required magnetic field strength. A three-pole wiggler with a flat peak field profile along the beam axis was designed to enhance the photon flux and flatten the transverse flux density distributions. The magnetic peak field at the center pole reached 1.08 Tesla for a magnetic gap of 26 mm. The maximum power density, integrated over all vertical angles, is 3.1 W/mm², which is substantially higher than that of the existing bending magnets at the APS (0.86 W/mm²). Detailed designs of the three-pole wiggler is presented, including calculated spectral-angular flux distributions.

• Research Organization: Argonne National Lab. (ANL), Argonne, IL (United States)
• Sponsoring Organization: USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
• DOE Contract Number: AC02-06CH11357
• OSTI ID: 1336947
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS