skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Chloride-reinforced carbon nanofiber host as effective polysulfide traps in lithium-sulfur batteries

Journal Article · · Advanced Science

Lithium-sulfur (Li-S) battery is one of the most promising alternatives for the current state-of-art lithium-ion batteries (LIBs) due to its high theoretical energy density and lower production cost from the use of earth abundant element - sulfur. However, the commercialization of Li-S batteries has been so far limited to the cyclability and the retention of active sulfur materials. Using co-electrospinning and physical vapor deposition procedures, we created a class of chloride-carbon nanofiber composites, and studied their effectiveness on polysulfides sequestration. By trapping sulfur reduction products in the modified-cathode through both chemical and physical confinements in a conductive host, these chloride-coated cathodes are shown to remarkably suppress the polysulfide dissolution and shuttling between lithium and sulfur electrodes. We show that not only the binding energy but also the electronic conductivity of the host plays an important role on the reversibility of sulfur-based cathode upon repeated cycles. Electrochemical analysis of the chloride-modified cathodes over hundreds of cycles indicates that too strong binding of the sulfur species may lead to the decay of Coulombic efficiency. Cells containing indium chloride-modified carbon nanofiber outperform cells with other halogenated salt modifications, delivering an average specific capacity of above 1200mAh g-1 at 0.2C over 200 cycles. Once loaded with high S content, it shows stable capacity retention with only 0.019% decay per cycle from 5th to 650th cycle. It also shows stabilized cyclability and enhanced Coulombic efficiency in the absence of traditional anode stabilizer lithium nitrite.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
Grant/Contract Number:
AC05-00OR22725
OSTI ID:
1336571
Journal Information:
Advanced Science, Vol. 3, Issue 12; ISSN 2198-3844
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 60 works
Citation information provided by
Web of Science

References (36)

Issues and challenges facing rechargeable lithium batteries journal November 2001
Building better batteries journal February 2008
The rechargeable revolution: A better battery journal March 2014
Battery materials for ultrafast charging and discharging journal March 2009
In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries journal May 2010
Li–O2 and Li–S batteries with high energy storage journal January 2012
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries journal May 2009
Pie-like electrode design for high-energy density lithium–sulfur batteries journal November 2015
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites journal September 2015
Improving lithium–sulphur batteries through spatial control of sulphur species deposition on a hybrid electrode surface journal May 2014
Aligned carbon nanotube/sulfur composite cathodes with high sulfur content for lithium–sulfur batteries journal March 2014
Two-dimensional layered transition metal disulphides for effective encapsulation of high-capacity lithium sulphide cathodes journal September 2014
Non-woven carbon paper as current collector for Li-ion/Li2S system: Understanding of the first charge mechanism journal October 2015
Role of Polysulfides in Self-Healing Lithium-Sulfur Batteries journal February 2013
Recent Advances in Electrolytes for Lithium-Sulfur Batteries journal April 2015
Enhancing lithium–sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide journal September 2014
Rational Design of Cathode Structure for High Rate Performance Lithium–Sulfur Batteries journal July 2015
Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries journal January 2013
Hollow Carbon Nanofibers Filled with MnO 2 Nanosheets as Efficient Sulfur Hosts for Lithium-Sulfur Batteries journal September 2015
Hybrid cathode architectures for lithium batteries based on TiS 2 and sulfur journal January 2015
A highly efficient polysulfide mediator for lithium–sulfur batteries journal January 2015
High-performance hollow sulfur nanostructured battery cathode through a scalable, room temperature, one-step, bottom-up approach journal April 2013
Tethered Molecular Sorbents: Enabling Metal-Sulfur Battery Cathodes journal July 2014
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder journal January 2013
Acacia Senegal -Inspired Bifunctional Binder for Longevity of Lithium-Sulfur Batteries journal August 2015
Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design journal April 2016
Electrochemically Stable Rechargeable Lithium-Sulfur Batteries with a Microporous Carbon Nanofiber Filter for Polysulfide journal July 2015
A free-standing carbon nanofiber interlayer for high-performance lithium–sulfur batteries journal January 2015
Hollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium Batteries journal October 2011
Sulfur Encapsulated in a TiO 2 -Anchored Hollow Carbon Nanofiber Hybrid Nanostructure for Lithium-Sulfur Batteries journal November 2014
Sulfur gradient-distributed CNF composite: a self-inhibiting cathode for binder-free lithium–sulfur batteries journal January 2014
Highly reversible Li/dissolved polysulfide batteries with binder-free carbon nanofiber electrodes journal January 2013
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries journal May 2015
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes journal April 2015
Hollow Carbon Nanofibers Filled with MnO 2 Nanosheets as Efficient Sulfur Hosts for Lithium-Sulfur Batteries journal September 2015
Flexible copper-stabilized sulfur–carbon nanofibers with excellent electrochemical performance for Li–S batteries journal January 2015

Cited By (22)

Hierarchical Co 3 O 4 Nanofiber–Carbon Sheet Skeleton with Superior Na/Li‐Philic Property Enabling Highly Stable Alkali Metal Batteries journal February 2019
A Review: Electrospun Nanofiber Materials for Lithium‐Sulfur Batteries journal August 2019
Highly Stable Lithium−Sulfur Batteries Promised by Siloxene: An Effective Cathode Material to Regulate the Adsorption and Conversion of Polysulfides journal February 2020
Sulfur Immobilization by “Chemical Anchor” to Suppress the Diffusion of Polysulfides in Lithium-Sulfur Batteries journal December 2017
Sulfur Immobilizer by Nanoscale TiO 2 Trapper Deposited on Hierarchical Porous Carbon and Graphene for Cathodes of Lithium-Sulfur Batteries journal February 2018
Review on High-Loading and High-Energy Lithium-Sulfur Batteries journal May 2017
Stable Lithium Electrodeposition at Ultra-High Current Densities Enabled by 3D PMF/Li Composite Anode journal February 2018
Flexible and High‐Loading Lithium–Sulfur Batteries Enabled by Integrated Three‐In‐One Fibrous Membranes journal August 2019
Halogenid‐basierte Materialien und Chemie für wiederaufladbare Batterien journal January 2020
Halide‐Based Materials and Chemistry for Rechargeable Batteries journal January 2020
1D Carbon‐Based Nanocomposites for Electrochemical Energy Storage journal August 2019
A Toolbox for Lithium-Sulfur Battery Research: Methods and Protocols journal June 2017
A review of solid electrolytes for safe lithium-sulfur batteries journal November 2017
Review of nanostructured current collectors in lithium–sulfur batteries journal July 2017
Decorating CoSe2 hollow nanospheres on reduced graphene oxide as advanced sulfur host material for performance enhanced lithium-sulfur batteries journal September 2019
A review of recent developments in rechargeable lithium–sulfur batteries journal January 2016
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries journal January 2017
Interaction between functionalized graphene and sulfur compounds in a lithium–sulfur battery – a density functional theory investigation journal January 2018
Suppression of dendritic lithium growth in lithium metal-based batteries journal January 2018
Chemical tailoring of one-dimensional polypyrene nanocapsules at a molecular level: towards ideal sulfur hosts for high-performance Li–S batteries journal January 2019
Inhibition of polysulfide diffusion in lithium–sulfur batteries: mechanism and improvement strategies journal January 2019
Metallic NiSe 2 nanoarrays towards ultralong life and fast Li 2 S oxidation kinetics of Li–S batteries journal January 2019