Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ

Turner, Todd J.; Shade, Paul A.; Bernier, Joel V.; Li, Shiu Fai; Schuren, Jay C.; Lind, Jonathan; Lienert, Ulrich; Kenesei, Peter; Suter, Robert M.; Blank, Basil; Almer, Jonathan

doi:10.1186/s40192-016-0048-1

Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ

Journal Article · Fri Mar 18 04:00:00 EDT 2016 · Integrating Materials and Manufacturing Innovation

DOI:https://doi.org/10.1186/s40192-016-0048-1· OSTI ID:1335677

Turner, Todd J.; Shade, Paul A.; Bernier, Joel V.; Li, Shiu Fai; Schuren, Jay C.; Lind, Jonathan; Lienert, Ulrich; Kenesei, Peter; Suter, Robert M.; Blank, Basil; Almer, Jonathan

High-energy diffraction microscopy (HEDM) constitutes a suite of combined X-ray characterization methods, which hold the unique advantage of illuminating the microstructure and micromechanical state of a material during concurrent in situ mechanical deformation. The data generated from HEDM experiments provides a heretofore unrealized opportunity to validate meso-scale modeling techniques, such as crystal plasticity finite element modeling (CPFEM), by explicitly testing the accuracy of these models at the length scales where the models predict their response. Combining HEDM methods with in situ loading under known and controlled boundary conditions represents a significant challenge, inspiring the recent development of a new high-precision rotation and axial motion system for simultaneously rotating and axially loading a sample. In this paper, we describe the initial HEDM dataset collected using this hardware on an alpha-titanium alloy (Ti-7Al) under in situ tensile deformation at the Advanced Photon Source, Argonne National Laboratory. We present both near-field HEDM data that maps out the grain morphology and intragranular crystallographic orientations and far-field HEDM data that provides the grain centroid, grain average crystallographic orientation, and grain average elastic strain tensor for each grain. Finally, we provide a finite element mesh that can be utilized to simulate deformation in the volume of this Ti-7Al specimen. The dataset supporting this article is available in the National Institute of Standards and Technology (NIST) repository (http://hdl.handle.net/11256/599).

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States)

Sponsoring Organization:: USDOE Office of Science (SC)

DOE Contract Number:: AC02-06CH11357

OSTI ID:: 1335677

Journal Information:: Integrating Materials and Manufacturing Innovation, Journal Name: Integrating Materials and Manufacturing Innovation Journal Issue: 1 Vol. 5; ISSN 2193-9764

Publisher:: Springer

Country of Publication:: United States

Language:: English

References (34)

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications Roters, F.; Eisenlohr, P.; Hantcherli, L. Acta Materialia, Vol. 58, Issue 4 https://doi.org/10.1016/j.actamat.2009.10.058	journal	February 2010
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Deutsches Elektronen-Synchrotron, DESY, Hamburg https://doi.org/10.3204/pubdb-2017-05174	text	January 2015
The influence of microstructure on surface strain distributions in a nickel micro-tension specimen Turner, T. J.; Shade, P. A.; Schuren, J. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 1 https://doi.org/10.1088/0965-0393/21/1/015002	journal	November 2012
On the accuracy of the self-consistent approximation for polycrystals: comparison with full-field numerical simulations Lebensohn, R. A.; Liu, Y.; Ponte Castañeda, P. Acta Materialia, Vol. 52, Issue 18 https://doi.org/10.1016/j.actamat.2004.07.040	journal	October 2004
Strain tensor development in a single grain in the bulk of a polycrystal under loading Margulies, L.; Lorentzen, T.; Poulsen, H. F. Acta Materialia, Vol. 50, Issue 7 https://doi.org/10.1016/S1359-6454(02)00028-9	journal	April 2002
In situ single-grain peak profile measurements on Ti–7Al during tensile deformation Lienert, U.; Brandes, M. C.; Bernier, J. V. Materials Science and Engineering: A, Vol. 524, Issue 1-2 https://doi.org/10.1016/j.msea.2009.06.047	journal	October 2009
Fiducial marker application method for position alignment of in situ multimodal X-ray experiments and reconstructions Shade, Paul A.; Menasche, David B.; Bernier, Joel V. Journal of Applied Crystallography, Vol. 49, Issue 2 https://doi.org/10.1107/s1600576716001989	journal	March 2016
Single-Crystal Elastic Moduli and the hcp → bcc Transformation in Ti, Zr, and Hf Fisher, E. S.; Renken, C. J. Physical Review, Vol. 135, Issue 2A https://doi.org/10.1103/PhysRev.135.A482	journal	July 1964
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Figshare https://doi.org/10.1184/r1/6506321	text	January 2018
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Review of Scientific Instruments, Vol. 86, Issue 9 https://doi.org/10.1063/1.4927855	journal	September 2015
Effects of grain interactions on deformation and local texture in polycrystals Becker, R.; Panchanadeeswaran, S. Acta Metallurgica et Materialia, Vol. 43, Issue 7 https://doi.org/10.1016/0956-7151(94)00460-Y	journal	July 1995
Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal Zhao, Z.; Ramesh, M.; Raabe, D. International Journal of Plasticity, Vol. 24, Issue 12 https://doi.org/10.1016/j.ijplas.2008.01.002	journal	December 2008
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Carnegie Mellon University https://doi.org/10.1184/r1/6506321.v1	text	January 2015
Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders Poulsen, H. F.; Nielsen, S. F.; Lauridsen, E. M. Journal of Applied Crystallography, Vol. 34, Issue 6 https://doi.org/10.1107/S0021889801014273	journal	November 2001
Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction Oddershede, Jette; Schmidt, Søren; Poulsen, Henning Friis Journal of Applied Crystallography, Vol. 43, Issue 3 https://doi.org/10.1107/S0021889810012963	journal	April 2010
Fatigue crack growth rates in alpha titanium: Faceted vs. striation growth Pilchak, Adam L. Scripta Materialia, Vol. 68, Issue 5 https://doi.org/10.1016/j.scriptamat.2012.10.041	journal	March 2013
Polycrystal model of the mechanical behavior of a Mo–TiC30 vol.% metal–ceramic composite using a three-dimensional microstructure map obtained by dual beam focused ion beam scanning electron microscopy Cédat, D.; Fandeur, O.; Rey, C. Acta Materialia, Vol. 60, Issue 4 https://doi.org/10.1016/j.actamat.2011.11.055	journal	February 2012
The Influence of Slip Character on the Creep and Fatigue Fracture of an α Ti-Al Alloy Brandes, M. C.; Mills, M. J.; Williams, J. C. Metallurgical and Materials Transactions A, Vol. 41, Issue 13 https://doi.org/10.1007/s11661-010-0407-z	journal	October 2010
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification Suter, R. M.; Hennessy, D.; Xiao, C. Review of Scientific Instruments, Vol. 77, Issue 12 https://doi.org/10.1063/1.2400017	journal	December 2006
Computational crystal plasticity Dawson, Paul R. International Journal of Solids and Structures, Vol. 37, Issue 1-2 https://doi.org/10.1016/S0020-7683(99)00083-9	journal	January 2000
An introduction to three-dimensional X-ray diffraction microscopy Poulsen, Henning Friis Journal of Applied Crystallography, Vol. 45, Issue 6, p. 1084-1097 https://doi.org/10.1107/S0021889812039143	journal	October 2012
Characterization of deformation anisotropies in an α-Ti alloy by nanoindentation and electron microscopy Kwon, J.; Brandes, M. C.; Sudharshan Phani, P. Acta Materialia, Vol. 61, Issue 13 https://doi.org/10.1016/j.actamat.2013.05.005	journal	August 2013
Fiducial marker application method for position alignment of in situ multimodal X-ray experiments and reconstructions Shade, Paul A.; Menasche, David B.; Bernier, Joel V. Journal of Applied Crystallography, Vol. 49, Issue 2 https://doi.org/10.1107/S1600576716001989	journal	March 2016
Three-Dimensional X-Ray Diffraction Microscopy Poulsen, Henning Springer Tracts in Modern Physics https://doi.org/10.1007/b97884	book	January 2004
Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography Demir, Eralp; Raabe, Dierk; Zaafarani, Nader Acta Materialia, Vol. 57, Issue 2 https://doi.org/10.1016/j.actamat.2008.09.039	journal	January 2009
Modeling large-strain deformation behavior and neighborhood effects during hot working of a coarse-grain nickel-base superalloy Turner, T. J.; Semiatin, S. L. Modelling and Simulation in Materials Science and Engineering, Vol. 19, Issue 6 https://doi.org/10.1088/0965-0393/19/6/065010	journal	August 2011
Residual strains in HY100 polycrystals: Comparisons of experiments and simulations Dawson, Paul; Boyce, Donald; MacEwen, Stuart Metallurgical and Materials Transactions A, Vol. 31, Issue 6 https://doi.org/10.1007/s11661-000-0165-4	journal	June 2000
Adaptive reconstruction method for three-dimensional orientation imaging Li, S. F.; Suter, R. M. Journal of Applied Crystallography, Vol. 46, Issue 2 https://doi.org/10.1107/S0021889813005268	journal	March 2013
High-energy diffraction microscopy at the advanced photon source Lienert, U.; Li, S. F.; Hefferan, C. M. JOM, Vol. 63, Issue 7 https://doi.org/10.1007/s11837-011-0116-0	journal	July 2011
Modeling the Influence of Material Structure on Deformation Induced Surface Roughening in AA7050 Thick Plate Turner, T. J.; Miller, M. P. Journal of Engineering Materials and Technology, Vol. 129, Issue 3 https://doi.org/10.1115/1.2744395	journal	November 2006
Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations Bhattacharyya, Abhishek; El-Danaf, Ehab; Kalidindi, Surya R. International Journal of Plasticity, Vol. 17, Issue 6 https://doi.org/10.1016/S0749-6419(00)00072-3	journal	July 2001
New opportunities for quantitative tracking of polycrystal responses in three dimensions Schuren, Jay C.; Shade, Paul A.; Bernier, Joel V. Current Opinion in Solid State and Materials Science, Vol. 19, Issue 4 https://doi.org/10.1016/j.cossms.2014.11.003	journal	August 2015
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis Bernier, J. V.; Barton, N. R.; Lienert, U. The Journal of Strain Analysis for Engineering Design, Vol. 46, Issue 7 https://doi.org/10.1177/0309324711405761	journal	July 2011
On the influence of crystal elastic moduli on computed lattice strains in AA-5182 following plastic straining Dawson, Paul; Boyce, Donald; MacEwen, Stuart Materials Science and Engineering: A, Vol. 313, Issue 1-2 https://doi.org/10.1016/S0921-5093(01)00967-4	journal	August 2001

Cited By (2)

Measuring stress-induced martensite microstructures using far-field high-energy diffraction microscopy Bucsek, Ashley Nicole; Dale, Darren; Ko, Jun Young Peter Acta Crystallographica Section A Foundations and Advances, Vol. 74, Issue 5 https://doi.org/10.1107/s205327331800880x	journal	August 2018
A Planar Biaxial Experiment Platform for In Situ High-Energy Diffraction Studies Hommer, G. M.; Park, J. -S.; Brunson, Z. D. Experimental Mechanics, Vol. 59, Issue 5 https://doi.org/10.1007/s11340-019-00509-z	journal	May 2019

Similar Records

Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ

Journal Article · Fri Mar 18 00:00:00 EDT 2016 · Integrating Materials and Manufacturing Innovation · OSTI ID:1399714

Combined Near and Far Field High Energy Diffraction Microscopy Dataset for Ti-7Al Tensile Specimen Elastically Loaded In Situ

Dataset · Thu Dec 31 23:00:00 EST 2015 · OSTI ID:1329014

Related Subjects

36 MATERIALS SCIENCE
Crystal plasticity finite element modeling (CPFEM)
Far-field diffraction
High-energy diffraction microscopy (HEDM)
Near-field diffraction
Three-dimensional microstructure
X-ray diffraction

Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ

Citation Formats

References (34)

Cited By (2)

Similar Records

Related Subjects