Experimental Investigation of Coolant Boiling in a Half-Heated Circular Tube - Final CRADA Report
- Argonne National Lab. (ANL), Argonne, IL (United States)
Coolant subcooled boiling in the cylinder head regions of heavy-duty vehicle engines is unavoidable at high thermal loads due to high metal temperatures. However, theoretical, numerical, and experimental studies of coolant subcooled flow boiling under these specific application conditions are generally lacking in the engineering literature. The objective of this project was to provide such much-needed information, including the coolant subcooled flow boiling characteristics and the corresponding heat transfer coefficients, through experimental investigations.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V)
- DOE Contract Number:
- AC02-06CH11357
- OSTI ID:
- 1331818
- Report Number(s):
- ANL/ES-C1000101; 131502
- Country of Publication:
- United States
- Language:
- English
Similar Records
Experimental Investigation on the Effects of Coolant Concentration on Sub-Cooled Boiling and Crud Deposition on Reactor Cladding at Prototypical PWR Operating Conditions
Pressure drop, heat transfer, critical heat flux, and flow stability of two-phase flow boiling of water and ethylene glycol/water mixtures - final report for project "Efficent cooling in engines with nucleate boiling."
Development of a flow boiling map for subcooled and saturated flow boiling of different fluids inside circular tubes
Technical Report
·
Fri Oct 20 00:00:00 EDT 2006
·
OSTI ID:1331818
Pressure drop, heat transfer, critical heat flux, and flow stability of two-phase flow boiling of water and ethylene glycol/water mixtures - final report for project "Efficent cooling in engines with nucleate boiling."
Technical Report
·
Wed Jan 19 00:00:00 EST 2011
·
OSTI ID:1331818
Development of a flow boiling map for subcooled and saturated flow boiling of different fluids inside circular tubes
Journal Article
·
Fri Feb 01 00:00:00 EST 1991
· Journal of Heat Transfer (Transcations of the ASME (American Society of Mechanical Engineers), Series C); (United States)
·
OSTI ID:1331818