Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Effects of iso-octane/ethanol blend ratios on the observance of negative temperature coefficient behavior within the Ignition Quality Tester

Journal Article · · Fuel
 [1];  [2];  [2];  [1];  [2]
  1. Colorado School of Mines, Golden, CO (United States)
  2. National Renewable Energy Lab. (NREL), Golden, CO (United States)

Here, an ignition delay study investigating the reduction in low temperature heat release (LTHR) and negative temperature coefficient (NTC) region with increasing ethanol concentration in binary blends of ethanol/isooctane was conducted in the Ignition Quality Tester (IQT). The IQT is advantageous for studying multi-component fuels such as iso-octane/ethanol which are difficult to study at lower temperatures covering the NTC region in traditional systems (e.g., shock tubes, rapid compression machines, etc.). The high octane numbers and concomitant long ignition delay times of ethanol and iso-octane are ideal for study in the IQT allowing the system to reach a quasi-homogeneous mixture; allowing the effect of fuel chemistry on ignition delay to be investigated with minimal impact from the fuel spray due to the relatively long ignition times. NTC behavior from iso-octane/ethanol blends was observed for the first time using an IQT. Temperature sweeps of iso-octane/ethanol volumetric blends (100/0, 90/10, 80/20, 50/50, and 0/100) were conducted from 623 to 993 K at 0.5, 1.0 and 1.5 MPa and global equivalence ratios ranging from 0.7 to 1.0. Ignition of the iso-octane/ethanol blends in the IQT was also modeled using a 0-D homogeneous batch reactor model. Significant observations include: (1) NTC behavior was observed for ethanol/iso-octane fuel blends up to 20% ethanol. (2) Ethanol produced shorter ignition delay times than iso-octane in the high temperature region. (3) The initial increase in ethanol from 0% to 10% had a lesser impact on ignition delay than increasing ethanol from 10% to 20%. (4) The 0-D model predicts that at 0.5 and 1.0 MPa ethanol produces the shortest ignition time in the high-temperature regime, as seen experimentally.

Research Organization:
NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States))
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Bioenergy Technologies Office (EE-3B)
Grant/Contract Number:
AC36-08GO28308
OSTI ID:
1329461
Alternate ID(s):
OSTI ID: 1399040
Report Number(s):
NREL/JA--5400-66816
Journal Information:
Fuel, Journal Name: Fuel Vol. 186; ISSN 0016-2361
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

Similar Records

The impact of physicochemical property interactions of iso -octane/ethanol blends on ignition timescales
Journal Article · Tue Mar 20 00:00:00 EDT 2018 · Fuel · OSTI ID:1431423

HCCI experiments with gasoline surrogate fuels modeled by a semidetailed chemical kinetic model
Journal Article · Wed Apr 15 00:00:00 EDT 2009 · Combustion and Flame · OSTI ID:21168982

Ignition Quality Tester (IQT): An Alternative for Characterizing the Combustion Kinetics of Low Volatility Fuels
Conference · Mon Dec 31 23:00:00 EST 2012 · OSTI ID:1087250