skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Intermediate line filter design to meet both impedance compatibility and EMI specifications

Abstract

For most distributed power applications, an intermediate line filter must be employed between two cascaded converter stages, in order to prevent the pulsating input current of the converter downstream (load converter) from being reflected to the converter upstream (line conditioner). This paper presents simple, noniterative, and practical design procedures for intermediate line filters intended for distributed power applications. The design procedures realize a line filter which simultaneously meets both impedance compatibility requirements and EMI specifications. Design examples are given for both single-stage and two-stage filters.

Authors:
 [1];  [2]
  1. Samsung Electronics Co., Kyunggi-Do (Korea, Republic of). Power Electronics Div.
  2. Seoul National Univ. (Korea, Republic of). Dept. of Electrical Engineering
Publication Date:
Sponsoring Org.:
USDOE
OSTI Identifier:
131600
Resource Type:
Journal Article
Resource Relation:
Journal Name: IEEE Transactions on Power Electronics; Journal Volume: 10; Journal Issue: 5; Other Information: PBD: Sep 1995
Country of Publication:
United States
Language:
English
Subject:
24 POWER TRANSMISSION AND DISTRIBUTION; INTERCONNECTED POWER SYSTEMS; HARMONICS; ELECTRIC FILTERS; DISPERSED STORAGE AND GENERATION; ON-SITE POWER GENERATION

Citation Formats

Choi, B., and Cho, B.H. Intermediate line filter design to meet both impedance compatibility and EMI specifications. United States: N. p., 1995. Web. doi:10.1109/63.406846.
Choi, B., & Cho, B.H. Intermediate line filter design to meet both impedance compatibility and EMI specifications. United States. doi:10.1109/63.406846.
Choi, B., and Cho, B.H. Fri . "Intermediate line filter design to meet both impedance compatibility and EMI specifications". United States. doi:10.1109/63.406846.
@article{osti_131600,
title = {Intermediate line filter design to meet both impedance compatibility and EMI specifications},
author = {Choi, B. and Cho, B.H.},
abstractNote = {For most distributed power applications, an intermediate line filter must be employed between two cascaded converter stages, in order to prevent the pulsating input current of the converter downstream (load converter) from being reflected to the converter upstream (line conditioner). This paper presents simple, noniterative, and practical design procedures for intermediate line filters intended for distributed power applications. The design procedures realize a line filter which simultaneously meets both impedance compatibility requirements and EMI specifications. Design examples are given for both single-stage and two-stage filters.},
doi = {10.1109/63.406846},
journal = {IEEE Transactions on Power Electronics},
number = 5,
volume = 10,
place = {United States},
year = {Fri Sep 01 00:00:00 EDT 1995},
month = {Fri Sep 01 00:00:00 EDT 1995}
}