Fabrication and analysis of 150-mm-Aperture Nb₃Sn MQXF coils

Journal Article · Wed Jun 01 00:00:00 EDT 2016 · IEEE Transactions on Applied Superconductivity

DOI:https://doi.org/10.1109/TASC.2015.2514193· OSTI ID:1288734

Holik, Eddie Frank ^[1]; Ambrosio, Giorgio ^[1]; Anerella, Michael ^[1]; Bossert, Rodger ^[1]; Cavanna, Eugenio ^[2]; Cheng, Daniel ^[3]; Dietderich, Daniel R. ^[3]; Ferracin, Paolo ^[2]; Ghosh, Arup K. ^[4]; Izquierdo Bermudez, Susana ^[2]; Krave, Steven ^[1]; Nobrega, Alfred ^[1]; Perez, Juan C. ^[2]; Pong, I. ^[3]; Rochepault, Etienne ^[2]; Sabbi, Gian Luca ^[3]; Schmalzle, Jesse ^[4]; Yu, Miao ^[1]

---

1. Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
2. European Organization for Nuclear Research (CERN), Geneva (Switzerland)
3. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
4. Brookhaven National Lab. (BNL), Upton, NY (United States)

The U.S. LHC Accelerator Research Program (LARP) and CERN are combining efforts for the HiLumi-LHC upgrade to design and fabricate 150-mm-aperture interaction region quadrupoles with a nominal gradient of 130 T/m using Nb₃Sn. To successfully produce the necessary long MQXF triplets, the HiLumi-LHC collaboration is systematically reducing risk and design modification by heavily relying upon the experience gained from the successful 120-mm-aperture LARP HQ program. First-generation MQXF short (MQXFS) coils were predominately a scaling up of the HQ quadrupole design, allowing comparable cable expansion during Nb₃Sn formation heat treatment and increased insulation fraction for electrical robustness. A total of 13 first-generation MQXFS coils were fabricated between LARP and CERN. Systematic differences in coil size, coil alignment symmetry, and coil length contraction during heat treatment are observed and likely due to slight variances in tooling and insulation/cable systems. Analysis of coil cross sections indicate that field-shaping wedges and adjacent coil turns are systematically displaced from the nominal location and the cable is expanding less than nominally designed. A second-generation MQXF coil design seeks to correct the expansion and displacement discrepancies by increasing insulation and adding adjustable shims at the coil pole and midplanes to correct allowed magnetic field harmonics.

• Research Organization: Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Brookhaven National Lab. (BNL), Upton, NY (United States); Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
• Sponsoring Organization: USDOE Office of Science (SC), High Energy Physics (HEP)
• Contributing Organization: LARP
• Grant/Contract Number: AC02-07CH11359; SC00112704; AC02-05CH11231; AC02-07CH11259; AC02-98CH10886
• OSTI ID: 1288734
• Alternate ID(s): OSTI ID: 1245372; OSTI ID: 1456943
• Report Number(s): FERMILAB-PUB-15-358-TD; BNL-111686-2015-JA; 1409684
• Journal Information: IEEE Transactions on Applied Superconductivity, Vol. 26, Issue 4; ISSN 1051-8223
• Publisher: Institute of Electrical and Electronics Engineers (IEEE)
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
Nb3Sn magnet
superconducting accelerator magnets
low-beta quadrupole
high luminosity LHC
coils
superconducting cables
superconducting magnets
cable insulation
niobium-tin
apertures
NB₃Sn Magnet
High Luminosity LHC