skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Conductivity degradation of polyvinylidene fluoride composite binder during cycling: Measurements and simulations for lithium-ion batteries

Journal Article · · Journal of the Electrochemical Society
DOI:https://doi.org/10.1149/2.0341609jes· OSTI ID:1262307

The polymer-composite binder used in lithium-ion battery electrodes must both hold the electrodes together and augment their electrical conductivity while subjected to mechanical stresses caused by active material volume changes due to lithiation and delithiation. We have discovered that cyclic mechanical stresses cause significant degradation in the binder electrical conductivity. After just 160 mechanical cycles, the conductivity of polyvinylidene fluoride (PVDF):carbon black binder dropped between 45–75%. This degradation in binder conductivity has been shown to be quite general, occurring over a range of carbon black concentrations, with and without absorbed electrolyte solvent and for different polymer manufacturers. Mechanical cycling of lithium cobalt oxide (LiCoO2) cathodes caused a similar degradation, reducing the effective electrical conductivity by 30–40%. Mesoscale simulations on a reconstructed experimental cathode geometry predicted the binder conductivity degradation will have a proportional impact on cathode electrical conductivity, in qualitative agreement with the experimental measurements. Lastly, ohmic resistance measurements were made on complete batteries. Direct comparisons between electrochemical cycling and mechanical cycling show consistent trends in the conductivity decline. This evidence supports a new mechanism for performance decline of rechargeable lithium-ion batteries during operation – electrochemically-induced mechanical stresses that degrade binder conductivity, increasing the internal resistance of the battery with cycling.

Research Organization:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Organization:
USDOE National Nuclear Security Administration (NNSA)
Grant/Contract Number:
AC04-94AL85000
OSTI ID:
1262307
Report Number(s):
SAND-2016-6356J; 643788
Journal Information:
Journal of the Electrochemical Society, Vol. 163, Issue 9; ISSN 0013-4651
Publisher:
The Electrochemical SocietyCopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 48 works
Citation information provided by
Web of Science

Cited By (8)

Optimization of Carbon Nanotubes as Conductive Additives for High‐Energy‐Density Electrodes for Lithium‐Ion Batteries journal April 2019
A conductive thin layer on prepared positive electrodes by vapour reaction printing for high-performance lithium-ion batteries journal January 2017
Application of Artificial Intelligence to State-of-Charge and State-of-Health Estimation of Calendar-Aged Lithium-Ion Pouch Cells journal January 2019
Electrochemical Cycle-Life Characterization of High Energy Lithium-Ion Cells with Thick Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 and Graphite Electrodes journal January 2017
Editors' Choice—Mesoscale Analysis of Conductive Binder Domain Morphology in Lithium-Ion Battery Electrodes journal January 2018
Numerical Prediction of Multiscale Electronic Conductivity of Lithium-Ion Battery Positive Electrodes journal January 2019
Review—Promises and Challenges of In Situ Transmission Electron Microscopy Electrochemical Techniques in the Studies of Lithium Ion Batteries journal January 2017
Effect of Conductive Carbon Black on Mechanical Properties of Aqueous Polymer Binders for Secondary Battery Electrode journal September 2019