A cooperative study of gate entry designs: Welbeck Colliery (UK) and Jim Walter Resources (USA)
- Jim Walter Resources, Tuscaloosa, AL (United States)
Longwall developments in the UK have historically consisted of single entry gate roads. Adjacent developments were separated from existing pales by large barrier pillars (designed of sufficient width to get away from the longwall abutments of the previous panel) or by small barriers driven in the shadow, or de-stressed zone, of the previous panel. Some 2nd panel tailgates were also driven skin to skin leaving no coal barrier between the newly driven entry and the heavily supported existing gateroad. With the development and wide acceptance of fully bolted entries and the pressure to reduce production costs, alternatives to single entry drivage, particularly yield pillar developments, were examined. Through the Rock Mechanics Branch of british Coal, a cooperative study was begun with Jim Walter Resources, Inc., USA, (JWR) to look at the yield pillar alternative in detail. This study was to determine the feasibility of utilizing yield pillars in the UK and to determine, through monitoring, the possibility of reducing stable pillar widths at JWR. The study has included extensive monitoring of the yield-stable-yield pillar system at JWR No. 7 Mine and an underground trial of a two entry yield pillar test area at Welbeck Colliery in the UK. This paper describes results from the JWR study and the subsequent results of the first advancing yield pillar development in the UK at Welbeck Colliery.
- OSTI ID:
- 124674
- Report Number(s):
- CONF-950811--; ISBN 0-930284-56-9
- Country of Publication:
- United States
- Language:
- English
Similar Records
Vertical stress redistribution around a retreating longwall face end
Harworth Colliery: Rockbolted support in weak roof at depth