Degradation mechanisms of Platinum Nanoparticle Catalysts in Proton Exchange Membrane Fuel Cells: The Role of Particle Size
Five membrane-electrode assemblies (MEAs) with different average sizes of platinum (Pt) nanoparticles (2.2, 3.5, 5.0, 6.7, and 11.3 nm) in the cathode were analyzed before and after potential cycling (0.6 to 1.0 V, 50 mV/s) by transmission electron microscopy. Cathodes loaded with 2.2 nm and 3.5 nm catalyst nanoparticles exhibit the following changes during electrochemical cycling: (i) substantial broadening of the size distribution relative to the initial size distribution, (ii) presence of coalesced particles within the electrode, and (iii) precipitation of sub-micron-sized particles with complex shapes within the membrane. In contrast, cathodes loaded with 5.0 nm, 6.7 nm and 11.3 nm size catalyst nanoparticles are significantly less prone to the aforementioned effects. As a result, the electrochemically-active surface area (ECA) of MEA cathodes loaded with 2.2 nm and 3.5 nm nanoparticle catalysts degrades dramatically within 1,000 cycles of operation, while the electrochemically-active surface area of MEA cathodes loaded with 5.0 nm, 6.7 nm and 11.3 nm nanoparticle catalysts appears to be stable even after 10,000 cycles. The loss in MEA performance for cathodes loaded with 2.2 nm and 3.5 nm nanoparticle catalysts appears to be due to the loss in electrochemically-active surface area concomitant with the observed morphological changes in these nanoparticle catalysts
- Research Organization:
- Argonne National Laboratory (ANL)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- AC02-06CH11357
- OSTI ID:
- 1239581
- Journal Information:
- Chemistry of Materials, Journal Name: Chemistry of Materials Journal Issue: 19 Vol. 26; ISSN 0897-4756
- Publisher:
- American Chemical Society (ACS)
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effect of Particle Size and Operating Conditions on Pt3Co PEMFC Cathode Catalyst Durability
Model electrode structures for studies of electrocatalyst degradation.
High-Current Density Durability of Pt/C and PtCo/C Catalysts at Similar Particle Sizes in PEMFCs
Journal Article
·
Thu May 28 20:00:00 EDT 2015
· Catalysts
·
OSTI ID:1208946
Model electrode structures for studies of electrocatalyst degradation.
Conference
·
Fri Oct 01 00:00:00 EDT 2010
·
OSTI ID:1026959
High-Current Density Durability of Pt/C and PtCo/C Catalysts at Similar Particle Sizes in PEMFCs
Journal Article
·
Sun Jan 31 23:00:00 EST 2021
· Journal of the Electrochemical Society
·
OSTI ID:1848543