The Outer Can Welder Analysis Software (OCWAS) was originally developed by SRTC for use at Hanford to assist in the storage of their excess plutonium in the DOE standard 3013 containers until it can be properly dispositioned using one of the approved DOE methods. After that development effort, SRS funded SRTC to develop a similar system for FB-Line for use with 3013 canister welding at SRS. More robust analysis routines and techniques were used with this new version as well as enhanced graphical representation of the data. During the welding process, critical weld parameters such as weld current and voltage, can give valuable information about the weld. In the past, weld data from the TIG welding process, has been monitored using strip chart recorders. The data from the weld process, recorded on the strip chart recorder traces, are reviewed to analyze the weld. To improve this process, another software package developed by SRTC, the OCW DAS, digitizes the weld data and stores the data in a file. The OCWAS automates the weld analysis process by analyzing the data obtained during the weld process. The OCWAS reads a data file that was previously collected using the OCW DAS software. The software will read the file and parse the data. The user is first prompted to enter the file name. The file is then opened and the operator name, canister identification, and Date/Time of Acquisition are read from the file and displayed on the screen. The binary weld data is then read from the file into an array until the end of the file is reached. The current, voltage, and position data are displayed on the screen in graphical format on the front panel. The weld power and resistance are calculated and are also displayed in graphical format on the front panel.
To order this software or receive further information, please fill out the following request: Request Software
@misc{osti_1230715,
title = {FBL Outer Can Welder Analysis Software, Version 00},
author = {Collins, Susan L.},
abstractNote = {The Outer Can Welder Analysis Software (OCWAS) was originally developed by SRTC for use at Hanford to assist in the storage of their excess plutonium in the DOE standard 3013 containers until it can be properly dispositioned using one of the approved DOE methods. After that development effort, SRS funded SRTC to develop a similar system for FB-Line for use with 3013 canister welding at SRS. More robust analysis routines and techniques were used with this new version as well as enhanced graphical representation of the data. During the welding process, critical weld parameters such as weld current and voltage, can give valuable information about the weld. In the past, weld data from the TIG welding process, has been monitored using strip chart recorders. The data from the weld process, recorded on the strip chart recorder traces, are reviewed to analyze the weld. To improve this process, another software package developed by SRTC, the OCW DAS, digitizes the weld data and stores the data in a file. The OCWAS automates the weld analysis process by analyzing the data obtained during the weld process. The OCWAS reads a data file that was previously collected using the OCW DAS software. The software will read the file and parse the data. The user is first prompted to enter the file name. The file is then opened and the operator name, canister identification, and Date/Time of Acquisition are read from the file and displayed on the screen. The binary weld data is then read from the file into an array until the end of the file is reached. The current, voltage, and position data are displayed on the screen in graphical format on the front panel. The weld power and resistance are calculated and are also displayed in graphical format on the front panel.},
doi = {},
url = {https://www.osti.gov/biblio/1230715},
year = {Mon Apr 21 00:00:00 EDT 2003},
month = {Mon Apr 21 00:00:00 EDT 2003},
note =
}