Spherical nanoindentation stress–strain curves

Pathak, Siddhartha; Kalidindi, Surya R.

doi:10.1016/j.mser.2015.02.001

Title: Spherical nanoindentation stress–strain curves

Journal Article · Tue Mar 24 00:00:00 EDT 2015 · Materials Science and Engineering. R, Reports

DOI:https://doi.org/10.1016/j.mser.2015.02.001· OSTI ID:1227669

Pathak, Siddhartha ^[1]; Kalidindi, Surya R. ^[2]

Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Georgia Inst. of Technology, Atlanta, GA (United States)

Although indentation experiments have long been used to measure the hardness and Young's modulus, the utility of this technique in analyzing the complete elastic–plastic response of materials under contact loading has only been realized in the past few years – mostly due to recent advances in testing equipment and analysis protocols. This paper provides a timely review of the recent progress made in this respect in extracting meaningful indentation stress–strain curves from the raw datasets measured in instrumented spherical nanoindentation experiments. These indentation stress–strain curves have produced highly reliable estimates of the indentation modulus and the indentation yield strength in the sample, as well as certain aspects of their post-yield behavior, and have been critically validated through numerical simulations using finite element models as well as direct in situ scanning electron microscopy (SEM) measurements on micro-pillars. Much of this recent progress was made possible through the introduction of a new measure of indentation strain and the development of new protocols to locate the effective zero-point of initial contact between the indenter and the sample in the measured datasets. As a result, this has led to an important key advance in this field where it is now possible to reliably identify and analyze the initial loading segment in the indentation experiments.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: W911NF-10-1-0409; AC52-06NA25396

OSTI ID:: 1227669

Alternate ID(s):: OSTI ID: 1250387

Report Number(s):: LA-UR-15-20495; PII: S0927796X15000157

Journal Information:: Materials Science and Engineering. R, Reports, Vol. 91, Issue C; ISSN 0927-796X

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 218 works

Citation information provided by
Web of Science

References (170)

Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect Greer, Julia R.; De Hosson, Jeff Th. M. Progress in Materials Science, Vol. 56, Issue 6 https://doi.org/10.1016/j.pmatsci.2011.01.005	journal	August 2011
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments Oliver, W. C.; Pharr, G. M. Journal of Materials Research, Vol. 7, Issue 06, p. 1564-1583 https://doi.org/10.1557/JMR.1992.1564	journal	June 1992
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology Oliver, W. C.; Pharr, G. M. Journal of Materials Research, Vol. 19, Issue 1 https://doi.org/10.1557/jmr.2004.19.1.3	journal	January 2004
Determination of the effective zero-point and the extraction of spherical nanoindentation stress–strain curves Kalidindi, Surya R.; Pathak, Siddhartha Acta Materialia, Vol. 56, Issue 14 https://doi.org/10.1016/j.actamat.2008.03.036	journal	August 2008
Determination of an effective zero-point and extraction of indentation stress–strain curves without the continuous stiffness measurement signal Pathak, S.; Shaffer, J.; Kalidindi, S. Scripta Materialia, Vol. 60, Issue 6 https://doi.org/10.1016/j.scriptamat.2008.11.028	journal	March 2009
On the determination of spherical nanoindentation stress–strain curves Basu, Sandip; Moseson, Alexander; Barsoum, Michel W. Journal of Materials Research, Vol. 21, Issue 10 https://doi.org/10.1557/jmr.2006.0324	journal	October 2006
A simple predictive model for spherical indentation Field, J. S.; Swain, M. V. Journal of Materials Research, Vol. 8, Issue 2 https://doi.org/10.1557/JMR.1993.0297	journal	February 1993
Nanoindentation: Application to dental hard tissue investigations Angker, L.; Swain, M. V. Journal of Materials Research, Vol. 21, Issue 8 https://doi.org/10.1557/jmr.2006.0257	journal	August 2006
A method for interpreting the data from depth-sensing indentation instruments Doerner, M. F.; Nix, W. D. Journal of Materials Research, Vol. 1, Issue 4 https://doi.org/10.1557/JMR.1986.0601	journal	August 1986
A review of analysis methods for sub-micron indentation testing Fischer-Cripps, A. C. Vacuum, Vol. 58, Issue 4 https://doi.org/10.1016/S0042-207X(00)00377-8	journal	September 2000
Nanoindentation of biological materials Ebenstein, Donna M.; Pruitt, Lisa A. Nano Today, Vol. 1, Issue 3 https://doi.org/10.1016/S1748-0132(06)70077-9	journal	August 2006
An Accurate Method of Determining the Hardness of Metals, with Particular Reference to Those of a High Degree of Hardness Smith, R. L.; Sandly, G. E. Proceedings of the Institution of Mechanical Engineers, Vol. 102, Issue 1 https://doi.org/10.1243/PIME_PROC_1922_102_033_02	journal	June 1922
A simple theory of static and dynamic hardness Tabor, David Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 192, Issue 1029, p. 247-274 https://doi.org/10.1098/rspa.1948.0008	journal	February 1948
Recovered elastic and plastic strains at residual micro-indentations in an MgO crystal Hammond, B. L.; Armstrong, R. W. Philosophical Magazine Letters, Vol. 57, Issue 1 https://doi.org/10.1080/09500838808227796	journal	January 1988
Determining the mechanical properties of small volumes of material from submicrometer spherical indentations Field, J. S.; Swain, M. V. Journal of Materials Research, Vol. 10, Issue 1 https://doi.org/10.1557/JMR.1995.0101	journal	January 1995
The indentation characterisation of the mechanical properties of various carbon materials: Glassy carbon, coke and pyrolytic graphite Fielda, J. S.; Swain, M. V. Carbon, Vol. 34, Issue 11 https://doi.org/10.1016/S0008-6223(96)00071-1	journal	January 1996
Sapphire: A kinking nonlinear elastic solid Basu, S.; Barsoum, M. W.; Kalidindi, S. R. Journal of Applied Physics, Vol. 99, Issue 6 https://doi.org/10.1063/1.2179974	journal	March 2006
Incipient and regular kink bands in fully dense and 10vol.% porous Ti2AlC Zhou, A.; Barsoum, M.; Basu, S. Acta Materialia, Vol. 54, Issue 6 https://doi.org/10.1016/j.actamat.2005.11.035	journal	April 2006
Kinking Nonlinear Elastic Solids, Nanoindentations, and Geology Barsoum, M. W.; Murugaiah, A.; Kalidindi, S. R. Physical Review Letters, Vol. 92, Issue 25 https://doi.org/10.1103/PhysRevLett.92.255508	journal	June 2004
Spherical Nanoindentations and Kink Bands in Ti ₃ SiC ₂ Murugaiah, A.; Barsoum, M. W.; Kalidindi, S. R. Journal of Materials Research, Vol. 19, Issue 4 https://doi.org/10.1557/JMR.2004.0148	journal	April 2004
Kink bands, nonlinear elasticity and nanoindentations in graphite Barsoum, M. W.; Murugaiah, A.; Kalidindi, S. R. Carbon, Vol. 42, Issue 8-9 https://doi.org/10.1016/j.carbon.2003.12.090	journal	January 2004
Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters Swain, M. V. Materials Science and Engineering: A, Vol. 253, Issue 1-2 https://doi.org/10.1016/S0921-5093(98)00725-4	journal	September 1998
New analytical procedure to determine stress-strain curve from spherical indentation data Taljat, B.; Zacharia, T.; Kosel, F. International Journal of Solids and Structures, Vol. 35, Issue 33 https://doi.org/10.1016/S0020-7683(97)00249-7	journal	November 1998
Evaluation of the stress–strain curve of metallic materials by spherical indentation Beghini, M.; Bertini, L.; Fontanari, V. International Journal of Solids and Structures, Vol. 43, Issue 7-8 https://doi.org/10.1016/j.ijsolstr.2005.06.068	journal	April 2006
Predictive model to estimate the stress–strain curves of bulk metals using nanoindentation Pelletier, H. Tribology International, Vol. 39, Issue 7 https://doi.org/10.1016/j.triboint.2005.03.019	journal	July 2006
Critical evaluation of the indentation data analyses methods for the extraction of isotropic uniaxial mechanical properties using finite element models Donohue, Brendan R.; Ambrus, Adrian; Kalidindi, Surya R. Acta Materialia, Vol. 60, Issue 9 https://doi.org/10.1016/j.actamat.2012.03.034	journal	May 2012
Indentation stress-strain curves for “quasi-ductile” ceramics Fischer-Cripps, A. C.; Lawn, B. R. Acta Materialia, Vol. 44, Issue 2 https://doi.org/10.1016/1359-6454(95)00204-9	journal	February 1996
Orientation informed nanoindentation of α-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip Zambaldi, Claudio; Yang, Yiyi; Bieler, Thomas R. Journal of Materials Research, Vol. 27, Issue 1 https://doi.org/10.1557/jmr.2011.334	journal	December 2011
Extracting single-crystal elastic constants from polycrystalline samples using spherical nanoindentation and orientation measurements Patel, Dipen K.; Al-Harbi, Hamad F.; Kalidindi, Surya R. Acta Materialia, Vol. 79 https://doi.org/10.1016/j.actamat.2014.07.021	journal	October 2014
Errors associated with depth-sensing microindentation tests Menčík, J.; Swain, M. V. Journal of Materials Research, Vol. 10, Issue 6 https://doi.org/10.1557/JMR.1995.1491	journal	June 1995
Critical review of analysis and interpretation of nanoindentation test data Fischer-Cripps, A. C. Surface and Coatings Technology, Vol. 200, Issue 14-15 https://doi.org/10.1016/j.surfcoat.2005.03.018	journal	April 2006
Surface detection in nanoindentation of soft polymers Deuschle, Julia; Enders, Susan; Arzt, Eduard Journal of Materials Research, Vol. 22, Issue 11 https://doi.org/10.1557/JMR.2007.0394	journal	November 2007
Indentation of elastic solids with a rigid Vickers pyramidal indenter Lim, Yong Yee; Munawar Chaudhri, M. Mechanics of Materials, Vol. 38, Issue 12 https://doi.org/10.1016/j.mechmat.2006.04.006	journal	December 2006
Simultaneous measurement of nanoprobe indentation force and photoluminescence of InGaAs/GaAs quantum dots and its simulation Liang, Yuan-Hua; Arai, Yoshio; Ozasa, Kazunari Physica E: Low-dimensional Systems and Nanostructures, Vol. 36, Issue 1 https://doi.org/10.1016/j.physe.2006.06.023	journal	January 2007
Young's modulus measurements on ultra-thin coatings Chudoba, T.; Griepentrog, M.; Dück, A. Journal of Materials Research, Vol. 19, Issue 1 https://doi.org/10.1557/jmr.2004.19.1.301	journal	January 2004
Determination of elastic properties of thin films by indentation measurements with a spherical indenter Chudoba, T.; Schwarzer, N.; Richter, F. Surface and Coatings Technology, Vol. 127, Issue 1 https://doi.org/10.1016/S0257-8972(00)00552-1	journal	May 2000
Mechanical properties of a graded B–C–N sputtered coating with varying Young's modulus: deposition, theoretical modelling and nanoindentation Linss, V.; Schwarzer, N.; Chudoba, T. Surface and Coatings Technology, Vol. 195, Issue 2-3 https://doi.org/10.1016/j.surfcoat.2004.06.010	journal	May 2005
Substrate influence in Young's modulus determination of thin films by indentation methods: Cubic boron nitride as an example Richter, F.; Herrmann, M.; Molnar, F. Surface and Coatings Technology, Vol. 201, Issue 6 https://doi.org/10.1016/j.surfcoat.2006.08.124	journal	December 2006
Requirement of a robust method for the precise determination of the contact point in the depth sensing hardness test Ullner, Christian Measurement, Vol. 27, Issue 1 https://doi.org/10.1016/S0263-2241(99)00054-8	journal	January 2000
Recording hardness testing. Problems of measurement at small indentation depths Grau, P.; Berg, G.; Fränzel, W. Physica Status Solidi (a), Vol. 146, Issue 1 https://doi.org/10.1002/pssa.2211460144	journal	November 1994
Determination of the effective zero point of contact for spherical nanoindentation Moseson, Alexander J.; Basu, Sandip; Barsoum, Michel W. Journal of Materials Research, Vol. 23, Issue 1 https://doi.org/10.1557/JMR.2008.0012	journal	January 2008
A review of nanoindentation continuous stiffness measurement technique and its applications Li, Xiaodong; Bhushan, Bharat Materials Characterization, Vol. 48, Issue 1 https://doi.org/10.1016/S1044-5803(02)00192-4	journal	February 2002
Studying grain boundary regions in polycrystalline materials using spherical nano-indentation and orientation imaging microscopy Pathak, Siddhartha; Michler, Johann; Wasmer, Kilian Journal of Materials Science, Vol. 47, Issue 2 https://doi.org/10.1007/s10853-011-5859-z	journal	August 2011
Importance of surface preparation on the nano-indentation stress-strain curves measured in metals Pathak, Siddhartha; Stojakovic, Dejan; Doherty, Roger Journal of Materials Research, Vol. 24, Issue 3 https://doi.org/10.1557/jmr.2009.0137	journal	March 2009
Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy Pathak, Siddhartha; Stojakovic, Dejan; Kalidindi, Surya R. Acta Materialia, Vol. 57, Issue 10 https://doi.org/10.1016/j.actamat.2009.03.008	journal	June 2009
Crystallographic texture evolution in bulk deformation processing of FCC metals Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3 https://doi.org/10.1016/0022-5096(92)80003-9	journal	January 1992
Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures Knezevic, Marko; Kalidindi, Surya R. Computational Materials Science, Vol. 39, Issue 3 https://doi.org/10.1016/j.commatsci.2006.08.025	journal	May 2007
Microstructure sensitive design for performance optimization Fullwood, David T.; Niezgoda, Stephen R.; Adams, Brent L. Progress in Materials Science, Vol. 55, Issue 6 https://doi.org/10.1016/j.pmatsci.2009.08.002	journal	August 2010
Procedures for construction of anisotropic elastic–plastic property closures for face-centered cubic polycrystals using first-order bounding relations Proust, G.; Kalidindi, S. Journal of the Mechanics and Physics of Solids, Vol. 54, Issue 8 https://doi.org/10.1016/j.jmps.2006.01.010	journal	August 2006
Exploring Biological Surfaces by Nanoindentation Enders, S.; Barbakadse, N.; Gorb, S. N. Journal of Materials Research, Vol. 19, Issue 3 https://doi.org/10.1557/jmr.2004.19.3.880	journal	March 2004
Microstructural elasticity and regional heterogeneity in human femoral bone of various ages examined by nano-indentation Rho, J. Y.; Zioupos, P.; Currey, J. D. Journal of Biomechanics, Vol. 35, Issue 2 https://doi.org/10.1016/S0021-9290(01)00199-3	journal	February 2002
Nanoindentation studies of materials Schuh, Christopher A. Materials Today, Vol. 9, Issue 5 https://doi.org/10.1016/S1369-7021(06)71495-X	journal	May 2006
Microdeformation of Solids Gane, N.; Bowden, F. P. Journal of Applied Physics, Vol. 39, Issue 3 https://doi.org/10.1063/1.1656376	journal	February 1968
Indentation induced dislocation nucleation: The initial yield point Gerberich, W. W.; Nelson, J. C.; Lilleodden, E. T. Acta Materialia, Vol. 44, Issue 9 https://doi.org/10.1016/1359-6454(96)00010-9	journal	September 1996
The injection of plasticity by millinewton contacts Gerberich, W. W.; Venkataraman, S. K.; Huang, H. Acta Metallurgica et Materialia, Vol. 43, Issue 4 https://doi.org/10.1016/0956-7151(94)00351-H	journal	April 1995
Determination of elastoplastic properties by instrumented sharp indentation Giannakopoulos, A. E.; Suresh, S. Scripta Materialia, Vol. 40, Issue 10 https://doi.org/10.1016/S1359-6462(99)00011-1	journal	April 1999
Discrete and continuous deformation during nanoindentation of thin films Gouldstone, A.; Koh, H. -J.; Zeng, K. -Y. Acta Materialia, Vol. 48, Issue 9 https://doi.org/10.1016/S1359-6454(00)00009-4	journal	May 2000
Nano-indentation of copper thin films on silicon substrates Suresh, S.; Nieh, T. -G.; Choi, B. W. Scripta Materialia, Vol. 41, Issue 9 https://doi.org/10.1016/S1359-6462(99)00245-6	journal	October 1999
The Mechanical Response of Gold Substrates Passivated by Self-Assembling Monolayer Films Thomas, R. C.; Houston, J. E.; Michalske, T. A. Science, Vol. 259, Issue 5103 https://doi.org/10.1126/science.259.5103.1883	journal	March 1993
Nanoindentation creep of single-crystal tungsten and gallium arsenide Syed Asif, S. A.; Pethica, J. B. Philosophical Magazine A, Vol. 76, Issue 6 https://doi.org/10.1080/01418619708214217	journal	December 1997
Comments on “Mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts” Doherty, Roger D. Scripta Materialia, Vol. 49, Issue 12 https://doi.org/10.1016/j.scriptamat.2003.08.019	journal	December 2003
Nanohardness of molybdenum in the vicinity of grain boundaries and triple junctions Eliash, T.; Kazakevich, M.; Semenov, V. N. Acta Materialia, Vol. 56, Issue 19 https://doi.org/10.1016/j.actamat.2008.07.036	journal	November 2008
Analysis of grain boundary effect of bulk polycrystalline materials through nanomechanical characterization Ohmura, T.; Tsuzaki, K. Journal of Physics D: Applied Physics, Vol. 41, Issue 7 https://doi.org/10.1088/0022-3727/41/7/074015	journal	March 2008
Simulation of defect nucleation in a crystal Gouldstone, Andrew; Van Vliet, Krystyn J.; Suresh, Subra Nature, Vol. 411, Issue 6838 https://doi.org/10.1038/35079687	journal	June 2001
Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals Wang, Y.; Raabe, D.; Klüber, C. Acta Materialia, Vol. 52, Issue 8 https://doi.org/10.1016/j.actamat.2004.01.016	journal	May 2004
Effects of dynamic indentation on the mechanical response of materials Cordill, M. J.; Moody, N. R.; Gerberich, W. W. Journal of Materials Research, Vol. 23, Issue 6 https://doi.org/10.1557/JMR.2008.0205	journal	June 2008
Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement Pharr, G. M.; Strader, J. H.; Oliver, W. C. Journal of Materials Research, Vol. 24, Issue 3 https://doi.org/10.1557/jmr.2009.0096	journal	March 2009
The Nano-Jackhammer effect in probing near-surface mechanical properties Cordill, M. J.; Lund, M. S.; Parker, J. International Journal of Plasticity, Vol. 25, Issue 11 https://doi.org/10.1016/j.ijplas.2008.12.015	journal	November 2009
The role of dislocation walls for nanoindentation to shallow depths Cordill, M. J.; Moody, N. R.; Gerberich, W. W. International Journal of Plasticity, Vol. 25, Issue 2 https://doi.org/10.1016/j.ijplas.2008.02.003	journal	February 2009
Indentation size effect in Ni–Fe solid solutions Durst, K.; Franke, O.; Böhner, A. Acta Materialia, Vol. 55, Issue 20 https://doi.org/10.1016/j.actamat.2007.08.044	journal	December 2007
The correlation of the indentation size effect measured with indenters of various shapes Swadener, J. G.; George, E. P.; Pharr, G. M. Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 4 https://doi.org/10.1016/S0022-5096(01)00103-X	journal	April 2002
Indentation size effect in MgO Feng, Gang; Nix, William D. Scripta Materialia, Vol. 51, Issue 6 https://doi.org/10.1016/j.scriptamat.2004.05.034	journal	September 2004
Viscoelastic characterization of polymers using instrumented indentation. I. Quasi-static testing VanLandingham, M. R.; Chang, N. -K.; Drzal, P. L. Journal of Polymer Science Part B: Polymer Physics, Vol. 43, Issue 14 https://doi.org/10.1002/polb.20454	journal	January 2005
Determination of elastic modulus and hardness of viscoelastic-plastic materials by instrumented indentation under harmonic load Menčík, J.; Rauchs, G.; Bardon, J. Journal of Materials Research, Vol. 20, Issue 10 https://doi.org/10.1557/JMR.2005.0338	journal	October 2005
Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentation Vachhani, S. J.; Doherty, R. D.; Kalidindi, S. R. Acta Materialia, Vol. 61, Issue 10 https://doi.org/10.1016/j.actamat.2013.03.005	journal	June 2013
Orientation imaging microscopy: Emerging and future applications Adams, Brent L. Ultramicroscopy, Vol. 67, Issue 1-4 https://doi.org/10.1016/S0304-3991(96)00103-9	journal	June 1997
Orientation imaging: The emergence of a new microscopy Adams, Brent L.; Wright, Stuart I.; Kunze, Karsten Metallurgical Transactions A, Vol. 24, Issue 4 https://doi.org/10.1007/BF02656503	journal	April 1993
Progressive steps in the development of electron backscatter diffraction and orientation imaging microscopy: EBSD AND OIM Dingley, D. Journal of Microscopy, Vol. 213, Issue 3 https://doi.org/10.1111/j.0022-2720.2004.01321.x	journal	February 2004
Indentation modulus of elastically anisotropic half spaces Vlassak, Joost J.; Nix, W. D. Philosophical Magazine A, Vol. 67, Issue 5 https://doi.org/10.1080/01418619308224756	journal	May 1993
Measuring the elastic properties of anisotropic materials by means of indentation experiments Vlassak, Joost J.; Nix, W. D. Journal of the Mechanics and Physics of Solids, Vol. 42, Issue 8 https://doi.org/10.1016/0022-5096(94)90033-7	journal	August 1994
A variational approach to the theory of the elastic behaviour of polycrystals Hashin, Z.; Shtrikman, S. Journal of the Mechanics and Physics of Solids, Vol. 10, Issue 4 https://doi.org/10.1016/0022-5096(62)90005-4	journal	October 1962
Grain-scale measurement of slip resistances in aluminum polycrystals using spherical nanoindentation Vachhani, Shraddha J.; Kalidindi, Surya R. Acta Materialia, Vol. 90 https://doi.org/10.1016/j.actamat.2015.02.017	journal	May 2015
Direct observation of orientation change by channel die compression of polycrystalline aluminum—Use of a split sample Panchanadeeswaran, S.; Doherty, R. D.; Becker, R. Acta Materialia, Vol. 44, Issue 3 https://doi.org/10.1016/1359-6454(95)00186-7	journal	March 1996
Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models Kalidindi, Surya R.; Bhattacharyya, Abhishek; Doherty, Roger D. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 460, Issue 2047 https://doi.org/10.1098/rspa.2003.1260	journal	July 2004
Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations Bhattacharyya, Abhishek; El-Danaf, Ehab; Kalidindi, Surya R. International Journal of Plasticity, Vol. 17, Issue 6 https://doi.org/10.1016/S0749-6419(00)00072-3	journal	July 2001
How Do Polycrystalline Materials Deform Plastically? Kalidindi, S. R.; Bhattacharyya, A.; Doherty, R. D. Advanced Materials, Vol. 15, Issue 16 https://doi.org/10.1002/adma.200304953	journal	August 2003
The Deformation and Ageing of Mild Steel: III Discussion of Results Hall, E. O. Proceedings of the Physical Society. Section B, Vol. 64, Issue 9 https://doi.org/10.1088/0370-1301/64/9/303	journal	September 1951
Nanomechanical characterizations of metals and thin films Göken, M.; Kempf, M.; Bordenet, M. Surface and Interface Analysis, Vol. 27, Issue 5-6 https://doi.org/10.1002/(SICI)1096-9918(199905/06)27:5/6<302::AID-SIA503>3.0.CO;2-D	journal	May 1999
Measurement of residual-stress effect by nanoindentation on elastically strained (100) W Lee, Yun-Hee; Kwon, Dongil Scripta Materialia, Vol. 49, Issue 5 https://doi.org/10.1016/S1359-6462(03)00290-2	journal	September 2003
Dislocation–grain boundary interactions in martensitic steel observed through in situ nanoindentation in a transmission electron microscope Ohmura, T.; Minor, A. M.; Stach, E. A. Journal of Materials Research, Vol. 19, Issue 12 https://doi.org/10.1557/JMR.2004.0474	journal	December 2004
Plasticity initiation and subsequent deformation behavior in the vicinity of single grain boundary investigated through nanoindentation technique Ohmura, Takahito; Tsuzaki, Kaneaki Journal of Materials Science, Vol. 42, Issue 5 https://doi.org/10.1007/s10853-006-0885-y	journal	February 2007
Nanoindentation-Induced Deformation Behavior in the Vicinity of Single Grain Boundary of Interstitial-Free Steel Ohmura, Takahito; Tsuzaki, Kaneaki; Yin, Fuxing MATERIALS TRANSACTIONS, Vol. 46, Issue 9 https://doi.org/10.2320/matertrans.46.2026	journal	January 2005
Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals Soer, W. A.; Aifantis, K. E.; De Hosson, J. Th. M. Acta Materialia, Vol. 53, Issue 17 https://doi.org/10.1016/j.actamat.2005.07.001	journal	October 2005
Detection of grain-boundary resistance to slip transfer using nanoindentation Soer, W. A.; De Hosson, J. Th. M. Materials Letters, Vol. 59, Issue 24-25 https://doi.org/10.1016/j.matlet.2005.03.075	journal	October 2005
Nanohardness of copper in the vicinity of grain boundaries Soifer, Ya. M.; Verdyan, A.; Kazakevich, M. Scripta Materialia, Vol. 47, Issue 12 https://doi.org/10.1016/S1359-6462(02)00284-1	journal	December 2002
Investigation of slip transmission behavior across grain boundaries in polycrystalline Ni ₃ Al using nanoindentation Wo, P. C.; Ngan, A. H. W. Journal of Materials Research, Vol. 19, Issue 1 https://doi.org/10.1557/jmr.2004.19.1.189	journal	January 2004
Indentation strain burst phenomenon induced by grain boundaries in niobium Wang, M. G.; Ngan, A. H. W. Journal of Materials Research, Vol. 19, Issue 8 https://doi.org/10.1557/JMR.2004.0316	journal	August 2004
Mechanical characterization of grain boundaries using nanoindentation Kalidindi, Surya R.; Vachhani, Shraddha J. Current Opinion in Solid State and Materials Science, Vol. 18, Issue 4 https://doi.org/10.1016/j.cossms.2014.05.002	journal	August 2014
Microstructure and multi-scale mechanical behavior of hard anodized and plasma electrolytic oxidation (PEO) coatings on aluminum alloy 5052 Wheeler, J. M.; Curran, J. A.; Shrestha, S. Surface and Coatings Technology, Vol. 207 https://doi.org/10.1016/j.surfcoat.2012.07.056	journal	August 2012
The use of ion accelerators to simulate fast neutron-induced voidage in metals Nelson, R. S.; Mazey, D. J.; Hudson, J. A. Journal of Nuclear Materials, Vol. 37, Issue 1 https://doi.org/10.1016/0022-3115(70)90176-5	journal	October 1970
Evaluation of irradiation facility options for fusion materials research and development Zinkle, Steven J.; Möslang, Anton Fusion Engineering and Design, Vol. 88, Issue 6-8 https://doi.org/10.1016/j.fusengdes.2013.02.081	journal	October 2013
An exploratory study to determine applicability of nano-hardness and micro-compression measurements for yield stress estimation Hosemann, P.; Swadener, J. G.; Kiener, D. Journal of Nuclear Materials, Vol. 375, Issue 1 https://doi.org/10.1016/j.jnucmat.2007.11.004	journal	March 2008
In situ nanocompression testing of irradiated copper Kiener, D.; Hosemann, P.; Maloy, S. A. Nature Materials, Vol. 10, Issue 8 https://doi.org/10.1038/nmat3055	journal	June 2011
The Effect of He Implantation on the Tensile Properties and Microstructure of Cu/Fe Nano-Bicrystals Landau, Peri; Guo, Q.; Hattar, K. Advanced Functional Materials, Vol. 23, Issue 10 https://doi.org/10.1002/adfm.201201776	journal	October 2012
Compressive flow behavior of Cu thin films and Cu/Nb multilayers containing nanometer-scale helium bubbles Li, N.; Mara, N. A.; Wang, Y. Q. Scripta Materialia, Vol. 64, Issue 10 https://doi.org/10.1016/j.scriptamat.2011.02.001	journal	May 2011
Suppression of irradiation hardening in nanoscale V/Ag multilayers Wei, Q. M.; Li, N.; Mara, N. Acta Materialia, Vol. 59, Issue 16 https://doi.org/10.1016/j.actamat.2011.06.043	journal	September 2011
Issues to consider using nano indentation on shallow ion beam irradiated materials Hosemann, Peter; Kiener, Daniel; Wang, Yongqiang Journal of Nuclear Materials, Vol. 425, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2011.11.070	journal	June 2012
Nanoindentation on ion irradiated steels Hosemann, P.; Vieh, C.; Greco, R. R. Journal of Nuclear Materials, Vol. 389, Issue 2 https://doi.org/10.1016/j.jnucmat.2009.02.026	journal	May 2009
The relationship between hardness and yield stress in irradiated austenitic and ferritic steels Busby, Jeremy T.; Hash, Mark C.; Was, Gary S. Journal of Nuclear Materials, Vol. 336, Issue 2-3 https://doi.org/10.1016/j.jnucmat.2004.09.024	journal	February 2005
The microstructure and associated tensile properties of irradiated fcc and bcc metals Victoria, M.; Baluc, N.; Bailat, C. Journal of Nuclear Materials, Vol. 276, Issue 1-3 https://doi.org/10.1016/S0022-3115(99)00203-2	journal	January 2000
Microscopic damage of tungsten exposed to deuterium–helium mixture plasma in PISCES and its impacts on retention property Miyamoto, M.; Nishijima, D.; Baldwin, M. J. Journal of Nuclear Materials, Vol. 415, Issue 1 https://doi.org/10.1016/j.jnucmat.2011.01.008	journal	August 2011
Radiation hardening revisited: role of intracascade clustering Singh, B. N.; Foreman, A. J. E.; Trinkaus, H. Journal of Nuclear Materials, Vol. 249, Issue 2-3 https://doi.org/10.1016/S0022-3115(97)00231-6	journal	October 1997
A void nucleation and growth based damage framework to model failure initiation ahead of a sharp notch in irradiated bcc materials Patra, Anirban; McDowell, David L. Journal of the Mechanics and Physics of Solids, Vol. 74 https://doi.org/10.1016/j.jmps.2014.10.006	journal	January 2015
Graded Materials for Resistance to Contact Deformation and Damage Suresh, S. Science, Vol. 292, Issue 5526 https://doi.org/10.1126/science.1059716	journal	June 2001
Observation of fracture and plastic deformation during indentation and scratching inside the scanning electron microscope Rabe, R.; Breguet, J. -M.; Schwaller, P. Thin Solid Films, Vol. 469-470 https://doi.org/10.1016/j.tsf.2004.08.096	journal	December 2004
Analyzing indentation behavior of LaGaO3 single crystals using sharp indenters Pathak, Siddhartha; Kalidindi, Surya R.; Moser, Benedikt Journal of the European Ceramic Society, Vol. 28, Issue 10 https://doi.org/10.1016/j.jeurceramsoc.2008.02.010	journal	January 2008
Bone structure: from ångstroms to microns Weiner, Stephen; Traub, Wolfie The FASEB Journal, Vol. 6, Issue 3 https://doi.org/10.1096/fasebj.6.3.1740237	journal	February 1992
The many adaptations of bone Currey, J. D. Journal of Biomechanics, Vol. 36, Issue 10 https://doi.org/10.1016/S0021-9290(03)00124-6	journal	October 2003
Microstructure and nanomechanical properties in osteons relate to tissue and animal age Burket, Jayme; Gourion-Arsiquaud, Samuel; Havill, Lorena M. Journal of Biomechanics, Vol. 44, Issue 2 https://doi.org/10.1016/j.jbiomech.2010.10.018	journal	January 2011
Bone mineralization density distribution in health and disease Roschger, P.; Paschalis, E. P.; Fratzl, P. Bone, Vol. 42, Issue 3 https://doi.org/10.1016/j.bone.2007.10.021	journal	March 2008
Differences in the degree of bone tissue mineralization account for little of the differences in tissue elastic properties Zebaze, Roger M. D.; Jones, Anthony C.; Pandy, Marcus G. Bone, Vol. 48, Issue 6 https://doi.org/10.1016/j.bone.2011.02.023	journal	June 2011
Raman and mechanical properties correlate at whole bone- and tissue-levels in a genetic mouse model Bi, Xiaohong; Patil, Chetan A.; Lynch, Conor C. Journal of Biomechanics, Vol. 44, Issue 2 https://doi.org/10.1016/j.jbiomech.2010.10.009	journal	January 2011
Quantitative Trait Loci that Determine Mouse Tibial Nanoindentation Properties in an F2 Population Derived from C57BL/6J X C3H/HeJ Jiao, Yan; Chiu, Hank; Fan, Zaifeng Calcified Tissue International, Vol. 80, Issue 6 https://doi.org/10.1007/s00223-007-9030-4	journal	June 2007
Accretion of Bone Quantity and Quality in the Developing Mouse Skeleton Miller, Lisa M.; Little, William; Schirmer, Anne Journal of Bone and Mineral Research, Vol. 22, Issue 7 https://doi.org/10.1359/jbmr.070402	journal	April 2007
Comparison of Nanoindentation Measurements Between Osteogenesis Imperfecta Type III and Type IV and Between Different Anatomic Locations (Femur/Tibia versus Iliac Crest) Fan, Zaifeng; Smith, Peter A.; Harris, Gerald F. Connective Tissue Research, Vol. 48, Issue 2 https://doi.org/10.1080/03008200601090949	journal	January 2007
Spatial Variation in Osteonal Bone Properties Relative to Tissue and Animal Age Gourion-Arsiquaud, Samuel; Burket, Jayme C.; Havill, Lorena M. Journal of Bone and Mineral Research, Vol. 24, Issue 7 https://doi.org/10.1359/jbmr.090201	journal	July 2009
Hierarchical relationship between bone traits and mechanical properties in inbred mice Jepsen, Karl J.; Akkus, Ozan J.; Majeska, Robert J. Mammalian Genome, Vol. 14, Issue 2 https://doi.org/10.1007/s00335-002-3045-y	journal	February 2003
Bone Brittleness Varies with Genetic Background in A/J and C57BL/6J Inbred Mice Jepsen, Karl J.; Pennington, Douglas E.; Lee, Ying-Lung Journal of Bone and Mineral Research, Vol. 16, Issue 10 https://doi.org/10.1359/jbmr.2001.16.10.1854	journal	October 2001
Genetic Variation in Bone Growth Patterns Defines Adult Mouse Bone Fragility Price, Christopher; Herman, Brad C.; Lufkin, Thomas Journal of Bone and Mineral Research, Vol. 20, Issue 11 https://doi.org/10.1359/JBMR.050707	journal	July 2005
Genetic Variation in Structure-Function Relationships for the Inbred Mouse Lumbar Vertebral Body Tommasini, Steven M.; Morgan, Timothy G.; van der Meulen, Marjolein CH Journal of Bone and Mineral Research, Vol. 20, Issue 5 https://doi.org/10.1359/JBMR.041234	journal	December 2004
Genetic variability in adult bone density among inbred strains of mice Beamer, W. G.; Donahue, L. R.; Rosen, C. J. Bone, Vol. 18, Issue 5 https://doi.org/10.1016/8756-3282(96)00047-6	journal	May 1996
Measuring the dynamic mechanical response of hydrated mouse bone by nanoindentation Pathak, Siddhartha; Gregory Swadener, J.; Kalidindi, Surya R. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 4, Issue 1 https://doi.org/10.1016/j.jmbbm.2010.09.002	journal	January 2011
Chemical Microstructure of Cortical Bone Probed by Raman Transects Timlin, Jerilyn A.; Carden, Angela; Morris, Michael D. Applied Spectroscopy, Vol. 53, Issue 11 https://doi.org/10.1366/0003702991945786	journal	November 1999
Study of human cortical bone and demineralized human cortical bone viscoelasticity Fois, M.; Lamure, A.; Fauran, M. J. Journal of Applied Polymer Science, Vol. 79, Issue 14 https://doi.org/10.1002/1097-4628(20010401)79:14<2527::AID-APP1061>3.0.CO;2-J	journal	January 2001
Super-Compressible Foamlike Carbon Nanotube Films Cao, A. Science, Vol. 310, Issue 5752 https://doi.org/10.1126/science.1118957	journal	November 2005
Higher Recovery and Better Energy Dissipation at Faster Strain Rates in Carbon Nanotube Bundles: An in-Situ Study Pathak, Siddhartha; Lim, Ee J.; Pour Shahid Saeed Abadi, Parisa ACS Nano, Vol. 6, Issue 3 https://doi.org/10.1021/nn300376j	journal	February 2012
Exceptionally high Young's modulus observed for individual carbon nanotubes Treacy, M. M. J.; Ebbesen, T. W.; Gibson, J. M. Nature, Vol. 381, Issue 6584 https://doi.org/10.1038/381678a0	journal	June 1996
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load Yu, M. Science, Vol. 287, Issue 5453 https://doi.org/10.1126/science.287.5453.637	journal	January 2000
Chemical Vapor Deposition of Carbon Nanotubes: A Review on Growth Mechanism and Mass Production Kumar, Mukul; Ando, Yoshinori Journal of Nanoscience and Nanotechnology, Vol. 10, Issue 6 https://doi.org/10.1166/jnn.2010.2939	journal	June 2010
In situ Mechanical Testing Reveals Periodic Buckle Nucleation and Propagation in Carbon Nanotube Bundles Hutchens, Shelby B.; Hall, Lee J.; Greer, Julia R. Advanced Functional Materials, Vol. 20, Issue 14 https://doi.org/10.1002/adfm.201000305	journal	May 2010
Analysis of uniaxial compression of vertically aligned carbon nanotubes Hutchens, Shelby B.; Needleman, Alan; Greer, Julia R. Journal of the Mechanics and Physics of Solids, Vol. 59, Issue 10 https://doi.org/10.1016/j.jmps.2011.05.002	journal	October 2011
Shell buckling of individual multiwalled carbon nanotubes using nanoindentation Waters, J. F.; Guduru, P. R.; Jouzi, M. Applied Physics Letters, Vol. 87, Issue 10 https://doi.org/10.1063/1.2012530	journal	September 2005
Mechanical behavior of ultralong multiwalled carbon nanotube mats Deck, Christian P.; Flowers, Jason; McKee, Gregg S. B. Journal of Applied Physics, Vol. 101, Issue 2 https://doi.org/10.1063/1.2426940	journal	January 2007
Determination of mechanical properties of carbon nanotubes and vertically aligned carbon nanotube forests using nanoindentation Qi, H. J.; Teo, K. B. K.; Lau, K. K. S. Journal of the Mechanics and Physics of Solids, Vol. 51, Issue 11-12 https://doi.org/10.1016/j.jmps.2003.09.015	journal	November 2003
Local and non-local behavior and coordinated buckling of CNT turfs Qiu, A.; Bahr, D. F.; Zbib, A. A. Carbon, Vol. 49, Issue 4 https://doi.org/10.1016/j.carbon.2010.12.011	journal	April 2011
Mechanical behavior of a carbon nanotube turf Mesarovic, S. Dj.; McCarter, C. M.; Bahr, D. F. Scripta Materialia, Vol. 56, Issue 2 https://doi.org/10.1016/j.scriptamat.2006.09.021	journal	January 2007
Length dependent foam-like mechanical response of axially indented vertically oriented carbon nanotube arrays Maschmann, Matthew R.; Zhang, Qiuhong; Du, Feng Carbon, Vol. 49, Issue 2 https://doi.org/10.1016/j.carbon.2010.09.034	journal	February 2011
Tuning the compressive mechanical properties of carbon nanotube foam Bradford, Philip D.; Wang, Xin; Zhao, Haibo Carbon, Vol. 49, Issue 8 https://doi.org/10.1016/j.carbon.2011.03.012	journal	July 2011
Effects of morphology on the micro-compression response of carbon nanotube forests Pour Shahid Saeed Abadi, Parisa; Hutchens, Shelby B.; Greer, Julia R. Nanoscale, Vol. 4, Issue 11 https://doi.org/10.1039/c2nr30474k	journal	January 2012
Buckling instabilities in multiwalled carbon nanotubes under uniaxial compression Waters, J. F.; Riester, L.; Jouzi, M. Applied Physics Letters, Vol. 85, Issue 10 https://doi.org/10.1063/1.1790602	journal	September 2004
Noncatalytic synthesis of carbon nanotubes, graphene and graphite on SiC Cambaz, Z. Goknur; Yushin, Gleb; Osswald, Sebastian Carbon, Vol. 46, Issue 6 https://doi.org/10.1016/j.carbon.2008.02.013	journal	May 2008
Viscoelasticity and high buckling stress of dense carbon nanotube brushes Pathak, Siddhartha; Cambaz, Z. Goknur; Kalidindi, Surya R. Carbon, Vol. 47, Issue 8 https://doi.org/10.1016/j.carbon.2009.03.042	journal	July 2009
Fatigue resistance of aligned carbon nanotube arrays under cyclic compression Suhr, J.; Victor, P.; Ci, L. Nature Nanotechnology, Vol. 2, Issue 7 https://doi.org/10.1038/nnano.2007.186	journal	July 2007
Reinforcement of single-walled carbon nanotube bundles by intertube bridging Kis, A.; Csányi, G.; Salvetat, J. -P. Nature Materials, Vol. 3, Issue 3 https://doi.org/10.1038/nmat1076	journal	February 2004
The mechanical efficiency of natural materials Wegst, U. G. K.; Ashby, M. F. Philosophical Magazine, Vol. 84, Issue 21 https://doi.org/10.1080/14786430410001680935	journal	July 2004
Multi-scale cohesive laws in hierarchical materials Yao, Haimin; Gao, Huajian International Journal of Solids and Structures, Vol. 44, Issue 25-26 https://doi.org/10.1016/j.ijsolstr.2007.06.007	journal	December 2007
MATERIALS SCIENCE: Bioinspired Structural Materials Ortiz, C.; Boyce, M. C. Science, Vol. 319, Issue 5866 https://doi.org/10.1126/science.1154295	journal	February 2008
Bone strength and its determinants Ammann, P.; Rizzoli, R. Osteoporosis International, Vol. 14, Issue S3 https://doi.org/10.1007/s00198-002-1345-4	journal	March 2003
Indentation instrument for the measurement of cartilage stiffness under arthroscopic control Lyyra, T.; Jurvelin, J.; Pitkänen, P. Medical Engineering & Physics, Vol. 17, Issue 5 https://doi.org/10.1016/1350-4533(95)97322-G	journal	July 1995
Estimation of the Young's modulus of articular cartilage using an arthroscopic indentation instrument and ultrasonic measurement of tissue thickness Töyräs, J.; Lyyra-Laitinen, T.; Niinimäki, M. Journal of Biomechanics, Vol. 34, Issue 2 https://doi.org/10.1016/S0021-9290(00)00189-5	journal	February 2001
The Application of an Indenter System to Measure Structural Properties of Articular Cartilage in the Horse. Suitability of the Instrument and Correlation with Biochemical Data Brama, P. A. J.; Barneveld, A.; Karssenberg, D. Journal of Veterinary Medicine Series A, Vol. 48, Issue 4 https://doi.org/10.1046/j.1439-0442.2001.00353.x	journal	May 2001
Arthroscopic Cartilage Indentation and Cartilage Lesions of Anterior Cruciate Ligament-Deficient Knees Vasara, Anna I.; Jurvelin, Jukka S.; Peterson, Lars The American Journal of Sports Medicine, Vol. 33, Issue 3 https://doi.org/10.1177/0363546504268040	journal	March 2005
Bone diagnostic instrument Hansma, Paul K.; Turner, Patricia J.; Fantner, Georg E. Review of Scientific Instruments, Vol. 77, Issue 7 https://doi.org/10.1063/1.2221506	journal	July 2006
Noninvasive Raman Spectroscopy of Human Tissue in vivo Matousek, Pavel; Draper, Edward R. C.; Goodship, Allen E. Applied Spectroscopy, Vol. 60, Issue 7 https://doi.org/10.1366/000370206777886955	journal	July 2006
Novel Assessment of Bone Using Time-Resolved Transcutaneous Raman Spectroscopy Draper, Edward RC; Morris, Michael D.; Camacho, Nancy P. Journal of Bone and Mineral Research, Vol. 20, Issue 11 https://doi.org/10.1359/JBMR.050710	journal	July 2005
In Vivo Assessment of Trabecular Bone Microarchitecture by High-Resolution Peripheral Quantitative Computed Tomography Boutroy, Stephanie; Bouxsein, Mary L.; Munoz, Francoise The Journal of Clinical Endocrinology & Metabolism, Vol. 90, Issue 12 https://doi.org/10.1210/jc.2005-1258	journal	December 2005
Quantitative Magnetic Resonance Imaging in the Calcaneus and Femur of Women With Varying Degrees of Osteopenia and Vertebral Deformity Status Wehrli, Felix W.; Hilaire, Luna; Fernández-Seara, Maria Journal of Bone and Mineral Research, Vol. 17, Issue 12 https://doi.org/10.1359/jbmr.2002.17.12.2265	journal	December 2002
Role of Magnetic Resonance for Assessing Structure and Function of Trabecular Bone Wehrli, Felix W.; Saha, Punam K.; Gomberg, Bryon R. Topics in Magnetic Resonance Imaging, Vol. 13, Issue 5 https://doi.org/10.1097/00002142-200210000-00005	journal	January 2002
Elastic modulus and stress–strain response of human enamel by nano-indentation He, Li Hong; Fujisawa, Naoki; Swain, Michael V. Biomaterials, Vol. 27, Issue 24 https://doi.org/10.1016/j.biomaterials.2006.03.045	journal	August 2006
Understanding pop-ins in spherical nanoindentation Pathak, Siddhartha; Riesterer, Jessica L.; Kalidindi, Surya R. Applied Physics Letters, Vol. 105, Issue 16 https://doi.org/10.1063/1.4898698	journal	October 2014

Cited By (29)

The influence of plasma-surface interaction on the performance of tungsten at the ITER divertor vertical targets De Temmerman, G.; Hirai, T.; Pitts, R. A. Plasma Physics and Controlled Fusion, Vol. 60, Issue 4 https://doi.org/10.1088/1361-6587/aaaf62	journal	March 2018
Extracting the isotropic uniaxial stress-strain relationship of hyperelastic soft materials based on new nonlinear indentation strain and stress measure Zhang, Qiang; Li, Xianjun; Yang, Qingsheng AIP Advances, Vol. 8, Issue 11 https://doi.org/10.1063/1.5063384	journal	November 2018
Criterion for particle rebound during wet collisions on elastic coatings Tan, Matthew Ryan; Wang, Yumo; Frechette, Joelle Physical Review Fluids, Vol. 4, Issue 8 https://doi.org/10.1103/physrevfluids.4.084305	journal	August 2019
Scratch‐induced yielding and ductile fracture in silicate glasses probed by nanoindentation Sawamura, Shigeki; Limbach, René; Wilhelmy, Sönke Journal of the American Ceramic Society, Vol. 102, Issue 12 https://doi.org/10.1111/jace.16679	journal	July 2019
Characterization of Hardness and Stiffness of Ceramic Matrix Composites through Instrumented Indentation Test Shi, Yuan; Neubrand, Achim; Koch, Dietmar Advanced Engineering Materials, Vol. 21, Issue 5 https://doi.org/10.1002/adem.201800806	journal	September 2018
Study of Local Mechanical Responses in an Epoxy–Carbon Fiber Laminate Composite Using Spherical Indentation Stress–Strain Protocols Rossi, Alicia; Castillo, Andrew; Przybyla, Craig Integrating Materials and Manufacturing Innovation, Vol. 8, Issue 4 https://doi.org/10.1007/s40192-019-00163-2	journal	November 2019
Crystal Indentation Hardness Armstrong, Ronald; Walley, Stephen; Elban, Wayne Crystals, Vol. 7, Issue 1 https://doi.org/10.3390/cryst7010021	journal	January 2017
Instrumented Indentation of Super-Insulating Silica Compacts Benane, Belynda; Meille, Sylvain; Foray, Geneviève Materials, Vol. 12, Issue 5 https://doi.org/10.3390/ma12050830	journal	March 2019
Characterization of elastoplastic properties of dissimilar weld joint of A302/Cr5Mo using the inversion analysis Jiang, Yong; Wu, Qiang; Zhao, Jiaxi Materials Research Express, Vol. 6, Issue 11 https://doi.org/10.1088/2053-1591/ab47c3	journal	September 2019
High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation Leitner, Alexander; Maier-Kiener, Verena; Kiener, Daniel Nanomaterials, Vol. 8, Issue 6 https://doi.org/10.3390/nano8060366	journal	May 2018
High throughput exploration of process-property linkages in Al-6061 using instrumented spherical microindentation and microstructurally graded samples Weaver, Jordan S.; Khosravani, Ali; Castillo, Andrew Integrating Materials and Manufacturing Innovation, Vol. 5, Article No. 10 https://doi.org/10.1186/s40192-016-0054-3	journal	June 2016
Chain Model for Carbon Nanotube Bundle under Plane Strain Conditions Korznikova, Elena A.; Rysaeva, Leysan Kh.; Savin, Alexander V. Materials, Vol. 12, Issue 23 https://doi.org/10.3390/ma12233951	journal	November 2019
A comparison of adiabatic shear bands in wrought and additively manufactured 316L stainless steel using nanoindentation and electron backscatter diffraction Weaver, Jordan S.; Livescu, Veronica; Mara, Nathan A. Journal of Materials Science, Vol. 55, Issue 4 https://doi.org/10.1007/s10853-019-03994-8	journal	September 2019
A Bayesian Framework for the Estimation of the Single Crystal Elastic Parameters From Spherical Indentation Stress-Strain Measurements Castillo, Andrew; Kalidindi, Surya R. Frontiers in Materials, Vol. 6 https://doi.org/10.3389/fmats.2019.00136	journal	June 2019
Research on rhenium–iridium alloy coating on microgroove molds in precision glass molding Xie, Jiaqing; Zhou, Tianfeng; Zhu, Zhanchen Applied Nanoscience https://doi.org/10.1007/s13204-019-01097-z	journal	July 2019
Representative Stress-Strain Curve by Spherical Indentation on Elastic-Plastic Materials Chang, Chao; Garrido, M. A.; Ruiz-Hervias, J. Advances in Materials Science and Engineering, Vol. 2018 https://doi.org/10.1155/2018/8316384	journal	January 2018
Bayesian Sequential Design of Experiments for Extraction of Single-Crystal Material Properties from Spherical Indentation Measurements on Polycrystalline Samples Castillo, Andrew R.; Joseph, V. Roshan; Kalidindi, Surya R. JOM, Vol. 71, Issue 8 https://doi.org/10.1007/s11837-019-03549-x	journal	June 2019
Probing Local Mechanical Properties in Polymer-Ceramic Hybrid Acetabular Sockets Using Spherical Indentation Stress-Strain Protocols Kim, Hyung N.; Mandal, Sourav; Basu, Bikramjit Integrating Materials and Manufacturing Innovation, Vol. 8, Issue 3 https://doi.org/10.1007/s40192-019-00141-8	journal	June 2019
Direct imaging of short-range order and its impact on deformation in Ti-6Al Zhang, Ruopeng; Zhao, Shiteng; Ophus, Colin Science Advances, Vol. 5, Issue 12 https://doi.org/10.1126/sciadv.aax2799	journal	December 2019
Insight into the microphysics of antigorite deformation from spherical nanoindentation Hansen, Lars N.; David, Emmanuel C.; Brantut, Nicolas Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 378, Issue 2165 https://doi.org/10.1098/rsta.2019.0197	journal	January 2020
Size effects resolve discrepancies in 40 years of work on low-temperature plasticity in olivine Kumamoto, Kathryn M.; Thom, Christopher A.; Wallis, David Science Advances, Vol. 3, Issue 9 https://doi.org/10.1126/sciadv.1701338	journal	September 2017
Enhanced void swelling in NiCoFeCrPd high-entropy alloy by indentation-induced dislocations Lu, Chenyang; Yang, Taini; Jin, Ke Materials Research Letters, Vol. 6, Issue 10 https://doi.org/10.1080/21663831.2018.1504136	journal	August 2018
Insight into the microphysics of antigorite deformation from spherical nanoindentation. Hansen, Lars N.; David, Emmanuel C.; Brantut, Nicolas The Royal Society https://doi.org/10.17863/cam.53828	journalarticle	January 2020
Crystal Indentation Hardness Armstrong, Ronald W.; Walley, Stephen M.; Elban, Wayne L. Crystals https://doi.org/10.3390/books978-3-03842-968-5	book	June 2018
Crystal Indentation Hardness Armstrong, Ronald W.; Walley, Stephen; Elban, Wayne L. Apollo - University of Cambridge Repository https://doi.org/10.17863/cam.47093	text	January 2018
Avalanches and Plastic Flow in Crystal Plasticity: An Overview Papanikolaou, Stefanos; Cui, Yinan; Ghoniem, Nasr arXiv https://doi.org/10.48550/arxiv.1705.06843	text	January 2017
Mechanocaloric effects in superionic thin films from atomistic simulations Sagotra, Arun K.; Errandonea, Daniel; Cazorla, Claudio Nature Communications, Vol. 8, Issue 1 https://doi.org/10.1038/s41467-017-01081-7	journal	October 2017
Probing nanoscale damage gradients in ion-irradiated metals using spherical nanoindentation Pathak, Siddhartha; Kalidindi, Surya R.; Weaver, Jordan S. Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-12071-6	journal	September 2017
Robust Optimization Scheme for Inverse Method for Crystal Plasticity Model Parametrization Shahmardani, Mahdieh; Vajragupta, Napat; Hartmaier, Alexander Materials, Vol. 13, Issue 3 https://doi.org/10.3390/ma13030735	journal	February 2020

Similar Records

Spherical nanoindentation stress-strain analysis, Version 1

Software · Mon Nov 07 00:00:00 EST 2016 · OSTI ID:1227669

Weaver, Jordan S.; Turner, David; Miller, Calvin; +4 more

Understanding pop-ins in spherical nanoindentation

Journal Article · Fri Oct 24 00:00:00 EDT 2014 · Applied Physics Letters · OSTI ID:1227669

Pathak, Siddhartha; Riesterer, Jessica L.; Kalidindi, Surya R.; +1 more

On capturing the grain-scale elastic and plastic anisotropy of alpha-Ti with spherical nanoindentation and electron back-scattered diffraction

Journal Article · Thu Sep 01 00:00:00 EDT 2016 · Acta Materialia · OSTI ID:1227669

Weaver, Jordan S.; Priddy, Matthew W.; McDowell, David L.; +1 more

Related Subjects

36 MATERIALS SCIENCE
77 NANOSCIENCE AND NANOTECHNOLOGY
nanoindentation
electron backscatter diffraction (EBSD)
orientation imaging microscopy (OIM)
polycrystalline metals
slip resistance
grain boundaries
pop-ins
Raman Spectroscopy

Title: Spherical nanoindentation stress–strain curves

Citation Formats

References (170)

Cited By (29)

Similar Records

Related Subjects