Experimental and numerical investigations of beryllium strength models using the Rayleigh-Taylor instability

Henry de Frahan, M. T.; Belof, J. L.; Cavallo, R. M.; Raevsky, V. A.; Ignatova, O. N.; Lebedev, A.; Ancheta, D. S.; El-dasher, B. S.; Florando, J. N.; Gallegos, G. F.; Johnsen, E.; LeBlanc, M. M.

doi:10.1063/1.4922336

Title: Experimental and numerical investigations of beryllium strength models using the Rayleigh-Taylor instability

Journal Article · Sun Jun 14 00:00:00 EDT 2015 · Journal of Applied Physics

DOI:https://doi.org/10.1063/1.4922336· OSTI ID:1225683

^[1]; Belof, J. L. ^[2];

^[2]; Raevsky, V. A. ^[3]; Ignatova, O. N. ^[3]; Lebedev, A. ^[3]; Ancheta, D. S. ^[2]; El-dasher, B. S. ^[2]; Florando, J. N. ^[2]; Gallegos, G. F. ^[2]; Johnsen, E. ^[1]; LeBlanc, M. M. ^[2]

Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA
Lawrence Livermore National Laboratory Livermore, California 94551-0808, USA
Russian Federal Nuclear Center-VNIIEF, Sarov 607188, Russia

A recent collaboration between LLNL and VNIIEF has produced a set of high explosive driven Rayleigh-Taylor strength data for beryllium. Design simulations using legacy strength models from Steinberg-Lund and Preston-Tonks-Wallace (PTW) suggested an optimal design that would delineate between not just different strength models, but different parameters sets of the PTW model. Application of the models to the post-shot results, however, shows close to classical growth. We characterize the material properties of the beryllium tested in the experiments. We also discuss recent efforts to simulate the data using the legacy strength models as well as the more recent RING relaxation model developed at VNIIEF. Finally, we present shock and ramp-loading recovery experiments conducted as part of the collaboration.

View Journal Article

Cite

Export

Save

Research Organization:: Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)

Sponsoring Organization:: USDOE

DOE Contract Number:: AC52-07NA27344

OSTI ID:: 1225683

Report Number(s):: LLNL-JRNL-662759; JAPIAU

Journal Information:: Journal of Applied Physics, Vol. 117, Issue 22; ISSN 0021-8979

Publisher:: American Institute of Physics (AIP)

Country of Publication:: United States

Language:: English

References (36)

Influence of strain rate and temperature on the mechanical behavior of beryllium Blumenthal, W. R.; Abeln, S. P.; Cannon, D. D. The tenth American Physical Society topical conference on shock compression of condensed matter, AIP Conference Proceedings https://doi.org/10.1063/1.55657	conference	January 1998
Influence of strain rate on mechanical properties and deformation texture of hot-pressed and rolled beryllium Sisneros, T. A.; Brown, D. W.; Clausen, B. Materials Science and Engineering: A, Vol. 527, Issue 20 https://doi.org/10.1016/j.msea.2010.04.035	journal	July 2010
Beryllium in stress-critical environments Marder, J. M. Journal of Materials for Energy Systems, Vol. 8, Issue 1 https://doi.org/10.1007/BF02833456	journal	June 1986
Texture development in S200-D, -E and P31664 beryllium blocks from neutron diffraction spectra Bennett, K.; Varma, R.; Von Dreele, R. B. Scripta Materialia, Vol. 40, Issue 7 https://doi.org/10.1016/S1359-6462(99)00014-7	journal	March 1999
How beryllium proved successful on the Space Shuttle Orbiter Norwood, L. B. Journal of Spacecraft and Rockets, Vol. 22, Issue 5 https://doi.org/10.2514/3.25066	journal	September 1985
Dynamic properties of high-purity beryllium Christman, D. R.; Froula, N. H. AIAA Journal, Vol. 8, Issue 3 https://doi.org/10.2514/3.5693	journal	March 1970
Shock−wave compression of single−crystal beryllium Pope, L. E.; Johnson, J. N. Journal of Applied Physics, Vol. 46, Issue 2 https://doi.org/10.1063/1.321636	journal	February 1975
The dislocation structure in beryllium single crystals deformed by prismatic slip Jönsson, S.; Beuers, J. Materials Science and Engineering, Vol. 91 https://doi.org/10.1016/0025-5416(87)90289-8	journal	July 1987
Deformation twinning Christian, J. W.; Mahajan, S. Progress in Materials Science, Vol. 39, Issue 1-2 https://doi.org/10.1016/0079-6425(94)00007-7	journal	January 1995
Evolution of Crystallographic Texture and Strength in Beryllium Blumenthal, W. R. SHOCK COMPRESSION OF CONDENSED MATTER - 2003: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.1780292	conference	January 2004
In Situ Neutron Diffraction Measurements During Annealing of Deformed Beryllium With Differing Initial Textures Brown, Donald W.; Clausen, B.; Sisneros, T. A. Metallurgical and Materials Transactions A, Vol. 44, Issue 13 https://doi.org/10.1007/s11661-013-1932-3	journal	August 2013
Development of crystallographic texture during high rate deformation of rolled and hot-pressed beryllium Brown, D. W.; Abeln, S. P.; Blumenthal, W. R. Metallurgical and Materials Transactions A, Vol. 36, Issue 4 https://doi.org/10.1007/s11661-005-0287-9	journal	April 2005
The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning Brown, Donald W.; Agnew, Sean R.; Abeln, S. P. Materials Science Forum, Vol. 495-497 https://doi.org/10.4028/www.scientific.net/MSF.495-497.1037	journal	September 2005
Twinning and de-twinning in beryllium during strain path changes Brown, D. W.; Almer, J. D.; Clausen, B. Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.07.087	journal	January 2013
Shockless compression and release behavior of beryllium to 110 GPa Brown, J. L.; Knudson, M. D.; Alexander, C. S. Journal of Applied Physics, Vol. 116, Issue 3 https://doi.org/10.1063/1.4890232	journal	July 2014
Elastic precursor decay in S-200F beryllium Adams, C. D.; Anderson, W. W.; Blumenthal, W. R. Journal of Physics: Conference Series, Vol. 500, Issue 11 https://doi.org/10.1088/1742-6596/500/11/112001	journal	May 2014
On the dynamic plasticity and strength of polycrystalline beryllium Mescheryakov, Yuri I.; Divakov, Alexandre K.; Petrov, Yuri A. International Journal of Impact Engineering, Vol. 30, Issue 1 https://doi.org/10.1016/S0734-743X(03)00058-7	journal	January 2004
Shock-induced structural transitions and dynamic strength of solids Mescheryakov, Yu. I.; Divakov, A. K.; Zhigacheva, N. I. International Journal of Solids and Structures, Vol. 41, Issue 9-10 https://doi.org/10.1016/j.ijsolstr.2003.11.015	journal	May 2004
Characterization of shocked beryllium Cady, C. M.; Adams, C. D.; Hull, L. M. EPJ Web of Conferences, Vol. 26 https://doi.org/10.1051/epjconf/20122601009	journal	January 2012
Characterization of shocked beryllium Brown, E. N.; Cady, C. M.; Gray, G. T. Journal of Physics: Conference Series, Vol. 500, Issue 11 https://doi.org/10.1088/1742-6596/500/11/112013	journal	May 2014
Impact of cylinders on a rigid boundary Wilkins, Mark L.; Guinan, Michael W. Journal of Applied Physics, Vol. 44, Issue 3 https://doi.org/10.1063/1.1662328	journal	March 1973
Aerial Plane Waves of Finite Amplitude Rayleigh, L. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 84, Issue 570 https://doi.org/10.1098/rspa.1910.0075	journal	September 1910
The instability of liquid surfaces when accelerated in a direction perpendicular to their planes. I Taylor, Geoffrey Ingram Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 201, Issue 1065, p. 192-196 https://doi.org/10.1098/rspa.1950.0052	journal	March 1950
Taylor instability in solids Barnes, John F.; Blewett, Patrick J.; McQueen, Robert G. Journal of Applied Physics, Vol. 45, Issue 2 https://doi.org/10.1063/1.1663310	journal	February 1974
Modeling and analysis of high-explosive driven perturbed plate experiments at Los Alamos Cooley, James H.; Olson, Russel T.; Oro, David Journal of Physics: Conference Series, Vol. 500, Issue 15 https://doi.org/10.1088/1742-6596/500/15/152003	journal	May 2014
Viscous Rayleigh-Taylor Instability Experiments at High Pressure and Strain Rate Park, Hye-Sook; Lorenz, K. T.; Cavallo, R. M. Physical Review Letters, Vol. 104, Issue 13 https://doi.org/10.1103/PhysRevLett.104.135504	journal	April 2010
Experimental results of tantalum material strength at high pressure and high strain rate Park, Hye-Sook; Barton, Nathan; Belof, Jonathan L. SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.3686536	conference	January 2012
Achieving the ultimate quality of image registration in radiography Arinin, V. A.; Tkachenko, B. I. Pattern Recognition and Image Analysis, Vol. 19, Issue 1 https://doi.org/10.1134/S1054661809010118	journal	March 2009
Velocimetry of fast surfaces using Fabry–Perot interferometry McMillan, C. F.; Goosman, D. R.; Parker, N. L. Review of Scientific Instruments, Vol. 59, Issue 1 https://doi.org/10.1063/1.1140014	journal	January 1988
JWL++: A Simple Reactive Flow Code Package for Detonation Souers, P. Clark; Anderson, Steve; Mercer, James Propellants, Explosives, Pyrotechnics, Vol. 25, Issue 2 https://doi.org/10.1002/(SICI)1521-4087(200004)25:2<54::AID-PREP54>3.0.CO;2-3	journal	April 2000
A new quotidian equation of state (QEOS) for hot dense matter More, R. M.; Warren, K. H.; Young, D. A. Physics of Fluids, Vol. 31, Issue 10 https://doi.org/10.1063/1.866963	journal	January 1988
A constitutive model for metals applicable at high‐strain rate Steinberg, D. J.; Cochran, S. G.; Guinan, M. W. Journal of Applied Physics, Vol. 51, Issue 3 https://doi.org/10.1063/1.327799	journal	March 1980
A constitutive model for strain rates from 10 ⁻ ⁴ to 10 ⁶ s ⁻ ¹ Steinberg, D. J.; Lund, C. M. Journal of Applied Physics, Vol. 65, Issue 4 https://doi.org/10.1063/1.342968	journal	February 1989
Model of plastic deformation for extreme loading conditions Preston, Dean L.; Tonks, Davis L.; Wallace, Duane C. Journal of Applied Physics, Vol. 93, Issue 1 https://doi.org/10.1063/1.1524706	journal	January 2003
Development of wide-range constitutive equations for calculations of high-rate deformation of metals Raevsky, V. A.; Aprelkov, O. N.; Ignatova, O. N. EPJ Web of Conferences, Vol. 10 https://doi.org/10.1051/epjconf/20101000022	journal	January 2010
A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable Follansbee, P. S.; Kocks, U. F. Acta Metallurgica, Vol. 36, Issue 1 https://doi.org/10.1016/0001-6160(88)90030-2	journal	January 1988

Similar Records

Experimental and numerical investigations of beryllium strength models using the Rayleigh-Taylor instability

Journal Article · Sun Jun 14 00:00:00 EDT 2015 · Journal of Applied Physics · OSTI ID:1225683

Johnsen, E.; Belof, J. L.; Cavallo, R. M.; +8 more

Aluminum Rayleigh Taylor Strength Measurements and Calculations

Conference · Wed Jan 10 00:00:00 EST 2007 · OSTI ID:1225683

Lindquist, M J; Cavallo, R M; Lorenz, K T; +3 more

Application of a Multiscale Model of Tantalum Deformation at Megabar Pressures

Journal Article · Thu May 13 00:00:00 EDT 2010 · Defense Science Quarterly, N/A, N/A, March 20, 2010, pp. 5-6 · OSTI ID:1225683

Cavallo, R M; Park, H; Barton, N R; +9 more

Related Subjects

75 CONDENSED MATTER PHYSICS
SUPERCONDUCTIVITY AND SUPERFLUIDITY

Title: Experimental and numerical investigations of beryllium strength models using the Rayleigh-Taylor instability

Citation Formats

References (36)

Similar Records

Related Subjects