Technology Solutions Case Study: Improving Comfort in Hot-Humid Climates with a Whole-House Dehumidifier
Program Document
·
OSTI ID:1221022
In order to quantify the performance of a combined whole-house dehumidifier (WHD) AC system, researchers from the Consortium of Advanced Residential Buildings (CARB) team monitored the operation of two Lennox AC systems coupled with a Honeywell DH150 TrueDRY whole-house dehumidifier for a six-month period. By using a WHD to control moisture levels (latent cooling) and optimizing a central AC to control temperature (sensible cooling), improvements in comfort can be achieved while reducing utility costs. Indoor comfort for this study was defined as maintaining indoor conditions at below 60% RH and a humidity ratio of 0.012 lbm/lbm while at common dry bulb set point temperatures of 74°-80°F. In addition to enhanced comfort, controlling moisture to these levels can reduce the risk of other potential issues such as mold growth, pests, and building component degradation. Because a standard AC must also reduce dry bulb air temperature in order to remove moisture, a WHD is typically needed to support these latent loads when sensible heat removal is not desired.
- Research Organization:
- Consortium for Advanced Residential Buildings (CARB)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Building Technologies Office (EE-5B) (Building America)
- OSTI ID:
- 1221022
- Report Number(s):
- DOE/GO-102013-4097; 6563
- Country of Publication:
- United States
- Language:
- English
Similar Records
Improving Comfort in Hot-Humid Climates with a Whole-House Dehumidifier, Windermere, Florida [Fact Sheet]
Sensitivity of occupant comfort models to humidity and their effect on cooling energy use
Technical Report
·
Fri Nov 01 00:00:00 EDT 2013
·
OSTI ID:1107438
Sensitivity of occupant comfort models to humidity and their effect on cooling energy use
Journal Article
·
Sat Aug 31 20:00:00 EDT 2019
· Building and Environment
·
OSTI ID:1544530