Schottky contact formation on polar and non-polar AlN

Journal Article · Fri Nov 21 04:00:00 EST 2014 · Journal of Applied Physics

DOI:https://doi.org/10.1063/1.4901954· OSTI ID:1211341

Reddy, P; Bryan, I; Bryan, Z; Tweedie, J; Kirste, R; Collazo, R; Sitar, Z

The interfaces of m-and c-plane AlN with metals of different work functions and electro-negativities were characterized and the Schottky barrier heights were measured. The Schottky barrier height was determined by measuring the valence band maximum (VBM) with respect to the Fermi level at the surface (interface) before (after) metallization. VBM determination included accurate modeling and curve fitting of density of states at the valence band edge with the XPS data. The experimental behavior of the barrier heights could not be explained by the Schottky-Mott model and was modeled using InterFace-Induced Gap States (IFIGS). A slope parameter (S-X) was used to incorporate the density of surface states and is a measure of Fermi level pinning. The experimental barriers followed theoretical predictions with a barrier height at the surface Fermi level (Charge neutrality level (CNL)) of similar to 2.1 eV (similar to 2.7 eV) on m-plane (c-plane) and S-X similar to 0.36 eV/Miedema unit. Slope parameter much lower than 0.86 implied a surface/interface states dominated behavior with significant Fermi level pinning and the measured barrier heights were close to the CNL. Titanium and zirconium provided the lowest barriers (1.6 eV) with gold providing the highest (2.3 eV) among the metals analyzed on m-plane. It was consistently found that barrier heights decreased from metal polar to non-polar surfaces, in general, due to an increasing CNL. The data indicated that charged IFIGS compensate spontaneous polarization charge. These barrier height and slope parameter measurements provided essential information for designing Schottky diodes and other contact-based devices on AlN. (C) 2014 AIP Publishing LLC.

• Sponsoring Organization: USDOE Advanced Research Projects Agency - Energy (ARPA-E)
• DOE Contract Number: AR0000299
• OSTI ID: 1211341
• Journal Information: Journal of Applied Physics, Journal Name: Journal of Applied Physics Journal Issue: 19 Vol. 116; ISSN 0021-8979
• Country of Publication: United States
• Language: English