Single-crystal and textured polycrystalline Nd2Fe14B flakes with a submicron or nanosize thickness

Journal Article · Wed Feb 01 00:00:00 EST 2012 · Acta Materialia

DOI:https://doi.org/10.1016/j.actamat.2011.11.062· OSTI ID:1211004

Cui, BZ; Zheng, LY; Li, WF; Liu, JF; Hadjipanayis, GC

This paper reports on the fabrication, structure and magnetic property optimization of Nd2Fe14B single-crystal and [0 0 1] textured poly-nanocrystalline flakes prepared by surfactant-assisted high-energy ball milling (HEBM). Single-crystal Nd2Fe14B flakes first with micron and then with submicron thicknesses were formed via continuous basal cleavage along the (1 1 0) planes of the irregularly shaped single-crystal microparticles during the early stage of HEBM. With further milling, [0 0 1] textured polycrystalline submicron Nd2Fe14B flakes were formed. Finally, crystallographically anisotropic polycrystalline Nd2Fe14B nanoflakes were formed after milling for 5-6 h. Anisotropic magnetic behavior was found in all of the flake samples. Nd2Fe14B flakes prepared with either oleic acid (OA) or oleylamine (OY) as the surfactant exhibited similar morphology, structure and magnetic properties. Both the addition of some low-melting-point eutectic Nd70Cu30 alloy and an appropriate post-annealing can increase the coercivity of the Nd2Fe14B flakes. The coercivity of Nd2Fe14B nanoflakes with an addition of 16.7 wt.% Nd70Cu30 by milling for 5 h in heptane with 20 wt.% OY increased from 3.7 to 6.8 kOe after annealing at 450 degrees C for 0.5 h. The mechanism for formation and coercivity enhancement of Nd2Fe14B single-crystal and textured poly-nanocrystalline flakes with a submicron or nanosize thickness was discussed. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

• Sponsoring Organization: USDOE Advanced Research Projects Agency - Energy (ARPA-E)
• OSTI ID: 1211004
• Journal Information: Acta Materialia, Vol. 60, Issue 4; ISSN 1359-6454
• Country of Publication: United States
• Language: English