Pseudocapacitance Induced Uniform Plating/Stripping of Li Metal Anode in Vertical Graphene Nanowalls
|
journal
|
October 2018 |
Anode Improvement in Rechargeable Lithium-Sulfur Batteries
|
journal
|
June 2017 |
Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries
|
journal
|
January 2019 |
ALD Protection of Li-Metal Anode Surfaces - Quantifying and Preventing Chemical and Electrochemical Corrosion in Organic Solvent
|
journal
|
August 2016 |
Dendrite‐Free Lithium Plating Induced by In Situ Transferring Protection Layer from Separator
|
journal
|
November 2019 |
Soft, Highly Elastic, and Discharge-Current-Controllable Eutectic Gallium-Indium Liquid Metal-Air Battery Operated at Room Temperature
|
journal
|
March 2018 |
Review on High-Loading and High-Energy Lithium-Sulfur Batteries
|
journal
|
May 2017 |
Rational design of spontaneous reactions for protecting porous lithium electrodes in lithium–sulfur batteries
|
journal
|
July 2019 |
Recent Progress in Metal-Organic Frameworks and Their Derived Nanostructures for Energy and Environmental Applications
|
journal
|
March 2017 |
Solid-state polymer electrolytes for high-performance lithium metal batteries
|
journal
|
September 2019 |
Electrolytes for electrochemical energy storage
|
journal
|
January 2017 |
A 3D Cu current collector with a biporous structure derived by a phase inversion tape casting method for stable Li metal anodes
|
journal
|
January 2019 |
Lithium–Magnesium Alloy as a Stable Anode for Lithium–Sulfur Battery
|
journal
|
February 2019 |
Building Organic/Inorganic Hybrid Interphases for Fast Interfacial Transport in Rechargeable Metal Batteries
|
journal
|
December 2017 |
A hybrid electrolyte for long-life semi-solid-state lithium sulfur batteries
|
journal
|
January 2017 |
Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes
|
journal
|
January 2019 |
Current Status and Future Prospects of Metal–Sulfur Batteries
|
journal
|
May 2019 |
Environmental Screening of Electrode Materials for a Rechargeable Aluminum Battery with an AlCl3/EMIMCl Electrolyte
|
journal
|
June 2018 |
Facile Generation of Polymer–Alloy Hybrid Layers for Dendrite‐Free Lithium‐Metal Anodes with Improved Moisture Stability
|
journal
|
July 2019 |
High Dielectric, Robust Composite Protective Layer for Dendrite‐Free and LiPF 6 Degradation‐Free Lithium Metal Anode
|
journal
|
September 2019 |
An Armored Mixed Conductor Interphase on a Dendrite-Free Lithium-Metal Anode
|
journal
|
September 2018 |
Three‐Dimensional Graphene/Ag Aerogel for Durable and Stable Li Metal Anodes in Carbonate‐Based Electrolytes
|
journal
|
March 2019 |
A Li 2 S-Based Sacrificial Layer for Stable Operation of Lithium-Sulfur Batteries
|
journal
|
October 2018 |
An Artificial Solid Electrolyte Interphase with High Li-Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes
|
journal
|
December 2016 |
Self-supported TiN nanorod array/carbon textile as a lithium host that induces dendrite-free lithium plating with high rates and long cycle life
|
journal
|
January 2020 |
Advances in Interfaces between Li Metal Anode and Electrolyte
|
journal
|
December 2017 |
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
|
journal
|
August 2017 |
Two-dimensional molecular brush-functionalized porous bilayer composite separators toward ultrastable high-current density lithium metal anodes
|
journal
|
March 2019 |
SiO 2 Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life
|
journal
|
January 2016 |
Lithium Silicide Surface Enrichment: A Solution to Lithium Metal Battery
|
journal
|
July 2018 |
Air‐Stable and Dendrite‐Free Lithium Metal Anodes Enabled by a Hybrid Interphase of C 60 and Mg
|
journal
|
December 2019 |
Advances in Artificial Layers for Stable Lithium Metal Anodes
|
journal
|
April 2020 |
Sulfide Solid Electrolytes for Lithium Battery Applications
|
journal
|
August 2018 |
Review—Solid Electrolytes for Safe and High Energy Density Lithium-Sulfur Batteries: Promises and Challenges
|
journal
|
June 2017 |
Self‐Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh‐Rate and Large‐Capacity Lithium‐Metal Anode
|
journal
|
December 2019 |
Fast galvanic lithium corrosion involving a Kirkendall-type mechanism
|
journal
|
January 2019 |
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
|
journal
|
February 2018 |
High-Energy-Density Metal-Oxygen Batteries: Lithium-Oxygen Batteries vs Sodium-Oxygen Batteries
|
journal
|
September 2017 |
Synthesis and characterization of a hierarchically structured three-dimensional conducting scaffold for highly stable Li metal anodes
|
journal
|
January 2019 |
In Situ Li 3 PS 4 Solid-State Electrolyte Protection Layers for Superior Long-Life and High-Rate Lithium-Metal Anodes
|
journal
|
October 2018 |
Catalysts in metal–air batteries
|
journal
|
April 2018 |
Tin Intercalated Ultrathin MoO 3 Nanoribbons for Advanced Lithium-Sulfur Batteries
|
journal
|
December 2018 |
Bending impact on the performance of a flexible Li 4 Ti 5 O 12 -based all-solid-state thin-film battery
|
journal
|
May 2018 |
An Interconnected Channel-Like Framework as Host for Lithium Metal Composite Anodes
|
journal
|
January 2019 |
Soybean-derived hierarchical porous carbon with large sulfur loading and sulfur content for high-performance lithium–sulfur batteries
|
journal
|
January 2016 |
A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte
|
journal
|
July 2016 |
Facile Generation of Polymer-Alloy Hybrid Layers for Dendrite-Free Lithium-Metal Anodes with Improved Moisture Stability
|
journal
|
July 2019 |
Dendrite-Free Lithium Anode via a Homogenous Li-Ion Distribution Enabled by a Kimwipe Paper
|
journal
|
January 2017 |
Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite-Free Lithium Metal Anode Current Collector
|
journal
|
March 2018 |
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
|
journal
|
January 2018 |
Stable cycling of Li–S batteries by simultaneously suppressing Li-dendrite growth and polysulfide shuttling enabled by a bioinspired separator
|
journal
|
January 2020 |
Understanding undesirable anode lithium plating issues in lithium-ion batteries
|
journal
|
January 2016 |
Promise and reality of post-lithium-ion batteries with high energy densities
|
journal
|
March 2016 |
Facile and scalable engineering of a heterogeneous microstructure for uniform, stable and fast lithium plating/stripping
|
journal
|
January 2019 |
Revisiting the Role of Polysulfides in Lithium-Sulfur Batteries
|
journal
|
March 2018 |
Turning bulk materials into 0D, 1D and 2D metallic nanomaterials by selective aqueous corrosion
|
journal
|
January 2019 |
Suppressing Li Metal Dendrites Through a Solid Li‐Ion Backup Layer
|
journal
|
August 2018 |
Blocking Polysulfides in Graphene–Sulfur Cathodes of Lithium–Sulfur Batteries through Atomic Layer Deposition of Alumina
|
journal
|
May 2019 |
Conversion cathodes for rechargeable lithium and lithium-ion batteries
|
journal
|
January 2017 |
Solid/Solid Interfacial Architecturing of Solid Polymer Electrolyte–Based All‐Solid‐State Lithium–Sulfur Batteries by Atomic Layer Deposition
|
journal
|
September 2019 |
Self‐Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh‐Rate and Large‐Capacity Lithium‐Metal Anode
|
journal
|
January 2020 |
Lithium Metal Anode Materials Design: Interphase and Host
|
journal
|
October 2019 |
Recent research trends in Li–S batteries
|
journal
|
January 2018 |
A Li–Al–O Solid‐State Electrolyte with High Ionic Conductivity and Good Capability to Protect Li Anode
|
journal
|
December 2019 |
Conformality in atomic layer deposition: Current status overview of analysis and modelling
|
journal
|
June 2019 |
Pre-treatments of Lithium Foil Surface for Improving the Cycling Life of Li Metal Batteries
|
journal
|
November 2019 |
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
|
journal
|
March 2018 |
A high-performance lithium anode based on N-doped composite graphene
|
journal
|
April 2019 |
Anode interfacial layer formation via reductive ethyl detaching of organic iodide in lithium–oxygen batteries
|
journal
|
August 2019 |
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
|
journal
|
March 2016 |
Suppression of dendritic lithium growth in lithium metal-based batteries
|
journal
|
January 2018 |
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
|
journal
|
June 2018 |
Designable ultra-smooth ultra-thin solid-electrolyte interphases of three alkali metal anodes
|
journal
|
April 2018 |
A facile surface chemistry route to a stabilized lithium metal anode
|
journal
|
July 2017 |
Tailoring Lithium Deposition via an SEI‐Functionalized Membrane Derived from LiF Decorated Layered Carbon Structure
|
journal
|
January 2019 |
Effective Stabilization of a High-Loading Sulfur Cathode and a Lithium-Metal Anode in Li-S Batteries Utilizing SWCNT-Modulated Separators
|
journal
|
November 2015 |
Lithium metal protected by atomic layer deposition metal oxide for high performance anodes
|
journal
|
January 2017 |
Recent advances in understanding Li–CO 2 electrochemistry
|
journal
|
January 2019 |
ZnO nanoconfined 3D porous carbon composite microspheres to stabilize lithium nucleation/growth for high-performance lithium metal anodes
|
journal
|
January 2019 |
Antimony‐Doped Lithium Phosphate Artificial Solid Electrolyte Interphase for Dendrite‐Free Lithium‐Metal Batteries
|
journal
|
January 2019 |
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
|
journal
|
February 2019 |
Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework
|
journal
|
March 2018 |
Reviving Lithium-Metal Anodes for Next-Generation High-Energy Batteries
|
journal
|
June 2017 |
Guiding Uniform Li Plating/Stripping through Lithium–Aluminum Alloying Medium for Long‐Life Li Metal Batteries
|
journal
|
December 2018 |
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
|
journal
|
July 2017 |
Atomic and Molecular Layer Deposition for Superior Lithium-Sulfur Batteries: Strategies, Performance, and Mechanisms
|
journal
|
May 2018 |
Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport
|
journal
|
September 2017 |
Protected Lithium-Metal Anodes in Batteries: From Liquid to Solid
|
journal
|
July 2017 |
Straw-Brick-Like Carbon Fiber Cloth/Lithium Composite Electrode as an Advanced Lithium Metal Anode
|
journal
|
April 2018 |
Toward High Performance Lithium-Sulfur Batteries Based on Li 2 S Cathodes and Beyond: Status, Challenges, and Perspectives
|
journal
|
March 2018 |
Bottom-top channeling Li nucleation and growth by a gradient lithiophilic 3D conductive host for highly stable Li-metal anodes
|
journal
|
January 2020 |
Nanostructured Silicon Anodes for High-Performance Lithium-Ion Batteries
|
journal
|
December 2015 |
Oxygenated Nitrogen‐Doped Microporous Nanocarbon as a Permselective Interlayer for Ultrastable Lithium‐Sulfur Batteries
|
journal
|
January 2019 |
An Artificial Lithium Protective Layer that Enables the Use of Acetonitrile-Based Electrolytes in Lithium Metal Batteries
|
journal
|
March 2018 |
Ultrathin Al2O3-coated reduced graphene oxide membrane for stable lithium metal anode
|
journal
|
May 2018 |
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
|
journal
|
June 2016 |
Implanting CNT Forest onto Carbon Nanosheets as Multifunctional Hosts for High-Performance Lithium Metal Batteries
|
journal
|
February 2019 |
Improving Lithium‐Metal Battery Performance under the Conditions of Lean Electrolyte through MoS 2 Coating
|
journal
|
January 2020 |
Directing lateral growth of lithium dendrites in micro-compartmented anode arrays for safe lithium metal batteries
|
journal
|
January 2018 |
Ferromagnetic Nanoparticle-Assisted Polysulfide Trapping for Enhanced Lithium-Sulfur Batteries
|
journal
|
April 2018 |
Intercalated Electrolyte with High Transference Number for Dendrite‐Free Solid‐State Lithium Batteries
|
journal
|
April 2019 |
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
|
journal
|
May 2016 |
Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries
|
journal
|
February 2017 |
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
|
journal
|
March 2017 |
Recent Developments of the Lithium Metal Anode for Rechargeable Non-Aqueous Batteries
|
journal
|
July 2016 |
Theoretical Investigation of 2D Layered Materials as Protective Films for Lithium and Sodium Metal Anodes
|
journal
|
February 2017 |
High Performance Lithium Metal Batteries Enabled by Surface Tailoring of Polypropylene Separator with a Polydopamine/Graphene Layer
|
journal
|
November 2018 |
Efficient Li‐Ion‐Conductive Layer for the Realization of Highly Stable High‐Voltage and High‐Capacity Lithium Metal Batteries
|
journal
|
February 2019 |
An Air‐Stable and Dendrite‐Free Li Anode for Highly Stable All‐Solid‐State Sulfide‐Based Li Batteries
|
journal
|
August 2019 |
The Failure of Solid Electrolyte Interphase on Li Metal Anode: Structural Uniformity or Mechanical Strength?
|
journal
|
March 2020 |
Guiding Uniform Li Plating/Stripping through Lithium-Aluminum Alloying Medium for Long-Life Li Metal Batteries
|
journal
|
December 2018 |
Atomic Layer Deposition of Li x Al y S Solid-State Electrolytes for Stabilizing Lithium-Metal Anodes
|
journal
|
April 2016 |
Reduced Shuttle Effect of Lithium−sulfur Batteries by using a Simple Graphite-Modified Separator with a Preformed SEI Film
|
journal
|
November 2017 |
Low-Weight 3D Al 2 O 3 Network as an Artificial Layer to Stabilize Lithium Deposition
|
journal
|
August 2018 |
Design Principles of Functional Polymer Separators for High-Energy, Metal-Based Batteries
|
journal
|
December 2017 |
Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries
|
journal
|
March 2019 |
Anode‐Free Sodium Metal Batteries Based on Nanohybrid Core–Shell Templates
|
journal
|
June 2019 |
The Challenge of Lithium Metal Anodes for Practical Applications
|
journal
|
April 2019 |
Dendrite-free all-solid-state lithium batteries with lithium phosphorous oxynitride-modified lithium metal anode and composite solid electrolytes
|
journal
|
September 2018 |
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
|
journal
|
March 2018 |
Recent Progress in Liquid Electrolyte-Based Li–S Batteries: Shuttle Problem and Solutions
|
journal
|
November 2018 |
Design principles for electrolytes and interfaces for stable lithium-metal batteries
|
journal
|
September 2016 |
Reviving the lithium metal anode for high-energy batteries
|
journal
|
March 2017 |
Organosulfide-plasticized solid-electrolyte interphase layer enables stable lithium metal anodes for long-cycle lithium-sulfur batteries
|
journal
|
October 2017 |
An artificial TiO 2 /lithium n -butoxide hybrid SEI layer with facilitated lithium-ion transportation ability for stable lithium anodes
|
journal
|
January 2019 |
Inhibiting the growth of lithium dendrites at high current densities with oriented graphene foam
|
journal
|
January 2018 |
Lithium phosphide/lithium chloride coating on lithium for advanced lithium metal anode
|
journal
|
January 2018 |
Multi-functional nanowall arrays with unrestricted Li + transport channels and an integrated conductive network for high-areal-capacity Li–S batteries
|
journal
|
January 2018 |
A fast and stable Li metal anode incorporating an Mo 6 S 8 artificial interphase with super Li-ion conductivity
|
journal
|
January 2019 |
Probing the dynamic evolution of lithium dendrites: a review of in situ / operando characterization for lithium metallic batteries
|
journal
|
January 2019 |
Protection of lithium anodes by fibrous silica nanospheres
|
journal
|
January 2020 |
Engineering stable interfaces for three-dimensional lithium metal anodes
|
journal
|
July 2018 |
Electrochemically Stable Coating Materials for Li, Na, and Mg Metal Anodes in Durable High Energy Batteries
|
journal
|
January 2017 |
Self-Supporting Dendritic Copper Porous Film Inducing the Lateral Growth of Metallic Lithium for Highly Stable Li Metal Battery
|
journal
|
January 2019 |
Rechargeable Magnesium–Sulfur Battery Technology: State of the Art and Key Challenges
|
journal
|
September 2019 |
Dendrite-Suppressed Lithium Plating from a Liquid Electrolyte via Wetting of Li 3 N
|
journal
|
July 2017 |
Synergistic Effect of 3D Current Collectors and ALD Surface Modification for High Coulombic Efficiency Lithium Metal Anodes
|
journal
|
December 2018 |
A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte
|
journal
|
July 2016 |
Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport
|
journal
|
September 2017 |
Ultrahigh-Capacity and Long-Life Lithium-Metal Batteries Enabled by Engineering Carbon Nanofiber-Stabilized Graphene Aerogel Film Host
|
journal
|
September 2018 |
Understanding the molecular mechanism of pulse current charging for stable lithium-metal batteries
|
journal
|
July 2017 |
Ultrahigh–current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF 3 framework
|
journal
|
September 2017 |
Transforming from planar to three-dimensional lithium with flowable interphase for solid lithium metal batteries
|
journal
|
October 2017 |
Advanced Porous Carbon Materials for High-Efficient Lithium Metal Anodes
|
journal
|
July 2017 |
A Material Perspective of Rechargeable Metallic Lithium Anodes
|
journal
|
February 2018 |
Why Do Lithium-Oxygen Batteries Fail: Parasitic Chemical Reactions and Their Synergistic Effect
|
journal
|
July 2016 |
Atomic and Molecular Layer Deposition for Superior Lithium-Sulfur Batteries: Strategies, Performance, and Mechanisms
|
journal
|
June 2018 |
Cover Feature: Improving Lithium‐Metal Battery Performance under the Conditions of Lean Electrolyte through MoS 2 Coating (ChemElectroChem 4/2020)
|
journal
|
January 2020 |
Synergetic effect on catalytic activity and charge transfer in Pt-Pd bimetallic model catalysts prepared by atomic layer deposition
|
journal
|
January 2020 |
Cycle stability of lithium/garnet/lithium cells with different intermediate layers
|
journal
|
May 2018 |
A dual-phase Li–Ca alloy with a patternable and lithiophilic 3D framework for improving lithium anode performance
|
journal
|
January 2019 |
An Artificial Lithium Protective Layer that Enables the Use of Acetonitrile-Based Electrolytes in Lithium Metal Batteries
|
journal
|
March 2018 |
Review : Solid Electrolytes for Safe and High Energy Density Lithium-Sulfur Batteries : Promises and Challenges
|
text
|
January 2018 |
Robust Pinhole-free Li 3 N Solid Electrolyte Grown from Molten Lithium
|
journal
|
December 2017 |
Toward High-Performance Li Metal Anode via Difunctional Protecting Layer
|
journal
|
August 2019 |
Graphene-Modified 3D Copper Foam Current Collector for Dendrite-Free Lithium Deposition
|
journal
|
November 2019 |
Recent Progresses and Development of Advanced Atomic Layer Deposition towards High-Performance Li-Ion Batteries
|
journal
|
October 2017 |