High Temperature 300°C Directional Drilling System
- Baker Hughes Oilfield Operations, Houston, TX (United States); Baker Hughes
- Baker Hughes Oilfield Operations, Houston, TX (United States)
Many countries around the world, including the USA, have untapped geothermal energy potential. Enhanced Geothermal Systems (EGS) technology is needed to economically utilize this resource. Temperatures in some EGS reservoirs can exceed 300°C. To effectively utilize EGS resources, an array of injector and production wells must be accurately placed in the formation fracture network. This requires a high temperature directional drilling system. Most commercial services for directional drilling systems are rated for 175°C while geothermal wells require operation at much higher temperatures. Two U.S. Department of Energy (DOE) Geothermal Technologies Program (GTP) projects have been initiated to develop a 300°C capable directional drilling system, the first developing a drill bit, directional motor, and drilling fluid, and the second adding navigation and telemetry systems. This report is for the first project, “High Temperature 300°C Directional Drilling System, including drill bit, directional motor and drilling fluid, for enhanced geothermal systems,” award number DE-EE0002782. The drilling system consists of a drill bit, a directional motor, and drilling fluid. The DOE deliverables are three prototype drilling systems. We have developed three drilling motors; we have developed four roller-cone and five Kymera® bits; and finally, we have developed a 300°C stable drilling fluid, along with a lubricant additive for the metal-to-metal motor. Metal-to-metal directional motors require coatings to the rotor and stator for wear and corrosion resistance, and this coating research has been a significant part of the project. The drill bits performed well in the drill bit simulator test, and the complete drilling system has been tested drilling granite at Baker Hughes’ Experimental Test Facility in Oklahoma. The metal-to-metal motor was additionally subjected to a flow loop test in Baker Hughes’ Celle Technology Center in Germany, where it ran for more than 100 hours.
- Research Organization:
- Baker Hughes Oilfield Operations, Houston, TX (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- EE0002782
- OSTI ID:
- 1208637
- Report Number(s):
- DOE-BHI--0002782
- Country of Publication:
- United States
- Language:
- English
Similar Records
High Temperature 300°C Measurement While Drilling System
Auto Indexer for Percussive Hammers Final Report
Summary: High Temperature Downhole Motor
Technical Report
·
Thu Nov 29 23:00:00 EST 2018
·
OSTI ID:1496969
Auto Indexer for Percussive Hammers Final Report
Technical Report
·
Fri Dec 31 23:00:00 EST 2021
·
OSTI ID:1838582
Summary: High Temperature Downhole Motor
Technical Report
·
Sun Oct 01 00:00:00 EDT 2017
·
OSTI ID:1400071