Nanocrystalline SiC and Ti3SiC2 Alloys for Reactor Materials: Annual Report
- Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)
A new dual-phase nanocomposite of Ti3SiC2/SiC is being synthesized using preceramic polymers, ceramic powders, and carbon nanotubes (CNTs) designed to be suitable for advanced nuclear reactors and perhaps as fuel cladding. The material is being designed to have superior fracture toughness compared to SiC, adequate thermal conductivity, and higher density than SiC/SiC composites. This annual report summarizes the progress towards this goal and reports progress in understanding certain aspects of the material behavior but some shortcomings in achieving full density or in achieving adequate incorporation of CNTs. The measured thermal conductivity is adequate and falls into an expected range based on SiC and Ti3SiC2. Part of this study makes an initial assessment for Ti3SiC2 as a barrier to fission product transport. Ion implantation was used to introduce fission product surrogates (Ag and Cs) and a noble metal (Au) in Ti3SiC2, SiC, and a synthesized at PNNL. The experimental results indicate that the implanted Ag in SiC is immobile up to the highest temperature (1273 K) applied in this study; in contrast, significant out-diffusion of both Ag and Au in MAX phase Ti₃SiC₂ occurs during ion implantation at 873 K. Cs in Ti₃SiC₂ is found to diffuse during post-irradiation annealing at 973 K, and noticeable Cs release from the sample is observed. This study may suggest caution in using Ti3SiC2 as a fuel cladding material for advanced nuclear reactors operating at very high temperatures. Progress is reported in thermal conductivity modeling of SiC-based materials that is relevant to this research, as is progress in modeling the effects of CNTs on fracture strength of SiC-based materials.
- Research Organization:
- Pacific Northwest National Laboratory (PNNL), Richland, WA (United States). Environmental Molecular Sciences Laboratory (EMSL)
- Sponsoring Organization:
- USDOE Office of Science (SC), Biological and Environmental Research (BER)
- DOE Contract Number:
- AC05-76RL01830
- OSTI ID:
- 1188907
- Report Number(s):
- PNNL--23948; 44713; NT0104000
- Country of Publication:
- United States
- Language:
- English
Similar Records
Nanocrystalline SiC and Ti3SiC2 Alloys for Reactor Materials: Diffusion of Fission Product Surrogates
Nanocrystalline SiC and Ti3SiC2 Alloys for Reactor Materials: Thermal and Mechanical Properties
Diffusion of Ag, Au and Cs implants in MAX phase Ti3SiC2
Technical Report
·
Sat Nov 01 00:00:00 EDT 2014
·
OSTI ID:1167315
Nanocrystalline SiC and Ti3SiC2 Alloys for Reactor Materials: Thermal and Mechanical Properties
Technical Report
·
Tue Apr 01 00:00:00 EDT 2014
·
OSTI ID:1170110
Diffusion of Ag, Au and Cs implants in MAX phase Ti3SiC2
Journal Article
·
Sat May 16 00:00:00 EDT 2015
· Journal of Nuclear Materials, 462:310-320
·
OSTI ID:1182888