2015 Geothermal Technologies Office Peer Review Summary: Energetic Materials for EGS Well Stimulation
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
The development of enhanced or engineered geothermal systems (EGS), by definition, includes an engineered approach to reservoir stimulation. EGS require an effective method of generating a high surface area network of fractures, or the stimulation of existing fractures, in a formation in order to increase permeability/heat-transfer. The most accepted methodologies include hydraulic fracturing and chemical stimulation. Alternative methods employing energetic materials have been employed for reservoir stimulation. For oil & gas reservoirs, this has been accomplished in the past with solid propellant gas generators and high explosives but the pressurization rate and final pressure cannot be controlled or easily adjusted in the field. Our program is investigating controlled and tailored rapid gas generation from solid, liquid and gaseous energetic formulations to operate in the chasm between conventional propellants and solid high explosives. This distinct solid, liquid and gas phase energetic materials approach has specific attributes and that could be used synergistically or individually to enhance a specific formation. This may prove to enhance the viability of using geothermal resources for power production. By employing optimized energetic materials we can tailor burn rates above propellant burn rates to optimize the gas generation rate without entering the excessive realm of the high pressures generated by high explosives. Gas phase energetic materials offer a unique method of tailoring reaction rate and final pressure. Again, rapid pressurization at rates, far exceeding quasi-static conventional hydraulic rates, can generate multiple radial wellbore fractures and potentially provide a mechanism to induce shear destabilization within the formation that enables the fractures to be self-propping. Multiple fractures from the wellbore allow efficient coupling to the existing formation fracture network. Furthermore, these techniques allow for repeated stimulations allowing fractures to be extended further. Controlled rate pressurization is a useful tool for the efficient implementation of EGS. This multi-phase approach to fracturing can eliminate the need for massive pumping equipment and the water required with conventional hydraulic fracturing methods. Additionally these methods use “green” materials with negligible environmental impact. These methods promise to be more economical than conventional stimulation techniques. Our objective is to develop a family of ideal candidate energetic systems for optimally stimulating a formation.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1178353
- Report Number(s):
- SAND-2015-2600R; 581958
- Country of Publication:
- United States
- Language:
- English
Similar Records
Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems
Completion Design Considerations for a Horizontal Enhanced Geothermal System