R&D progress in SRF surface preparation with centrifugal barrel polishing (cbp) for both Nb and Cu

Conference · Sun Sep 01 04:00:00 EDT 2013

OSTI ID:1164417

Palczewski, Ari ^[1]

---

1. JLAB

Centrifugal Barrel polishing (CBP) is becoming a common R&D tool for SRF cavity preparation around the world. During the CBP process a cylindrically symmetric SRF cavity is filled with relatively cheap and environmentally friendly abrasive and sealed. The cavity is then spun around a cylindrically symmetric axis at high speeds uniformly conditioning the inner surface. This uniformity is especially relevant for SRF application because many times a single manufacturing defects limits cavity?s performance well below it?s theoretical limit. In addition CBP has created surfaces with roughness?s on the order of 10?s of nm which create a unique surface for wet chemistry or thin film deposition. CBP is now being utilized at Jefferson Laboratory, Fermi Laboratory and Cornell University in the US, Deutsches Elektronen-Synchrotron in Germany, Laboratori Nazionali di Legnaro in Italy, and Raja Ramanna Centre for Advanced Technology in India. In this talk we will present current CBP research from each lab including equipment, baseline recipes, cavity removal rates and subsequent cryogenic cavity tests on niobium as well as copper cavities where available.

• Research Organization: Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)
• Sponsoring Organization: USDOE Office of Science (SC)
• DOE Contract Number: AC05-06OR23177
• OSTI ID: 1164417
• Report Number(s): JLAB-ACC-13-1699; DOE/OR/23177-2820
• Country of Publication: United States
• Language: English