Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Benafan, O.; Padula, S. A.; Skorpenske, H. D.; An, K.; Vaidyanathan, R.

doi:10.1063/1.4896042

Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Journal Article · Thu Oct 02 00:00:00 EDT 2014 · Review of Scientific Instruments

DOI:https://doi.org/10.1063/1.4896042· OSTI ID:1163578

Benafan, O. ^[1]; Padula, S. A. ^[2]; Skorpenske, H. D. ^[3]; An, K. ^[3]; Vaidyanathan, R. ^[4]

NASA Glenn Research Center, Cleveland, OH (United States). Structures and Materials Division; Univ. of Central Florida, Orlando, FL (United States)
NASA Glenn Research Center, Cleveland, OH (United States). Structures and Materials Division
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS)
Univ. of Central Florida, Orlando, FL (United States)

Here we discuss a gripping capability that was designed, implemented, and tested for in situ neutron diffraction measurements during multiaxial loading and heating on the VULCAN engineering materials diffractometer at the spallation neutron source at Oak Ridge National Laboratory.

View Accepted Manuscript (DOE)

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source

Sponsoring Organization:: USDOE Office of Science (SC)

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1163578

Alternate ID(s):: OSTI ID: 22305925

Journal Information:: Review of Scientific Instruments, Journal Name: Review of Scientific Instruments Journal Issue: 10 Vol. 85; ISSN 0034-6748; ISSN RSINAK

Publisher:: American Institute of Physics (AIP)Copyright Statement

Country of Publication:: United States

Language:: English

References (27)

In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation Khalil-Allafi, J.; Hasse, B.; Klönne, M. Materialwissenschaft und Werkstofftechnik, Vol. 35, Issue 5 https://doi.org/10.1002/mawe.200400744	journal	May 2004
First In Situ Lattice Strains Measurements Under Load at VULCAN An, Ke; Skorpenske, Harley D.; Stoica, Alexandru D. Metallurgical and Materials Transactions A, Vol. 42, Issue 1 https://doi.org/10.1007/s11661-010-0495-9	journal	October 2010
Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi Padula, Santo; Qiu, Shipeng; Gaydosh, Darrell Metallurgical and Materials Transactions A, Vol. 43, Issue 12 https://doi.org/10.1007/s11661-012-1267-5	journal	June 2012
Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction Vaidyanathan, R.; Bourke, M. A. M.; Dunand, D. C. Acta Materialia, Vol. 47, Issue 12 https://doi.org/10.1016/S1359-6454(99)00214-1	journal	September 1999
Diffraction measurements of elastic strains in stainless steel subjected to in situ biaxial loading Marin, T.; Dawson, P. R.; Gharghouri, M. A. Acta Materialia, Vol. 56, Issue 16 https://doi.org/10.1016/j.actamat.2008.04.048	journal	September 2008
On elastic moduli and elastic anisotropy in polycrystalline martensitic NiTi Qiu, S.; Clausen, B.; Padula, S. A. Acta Materialia, Vol. 59, Issue 13 https://doi.org/10.1016/j.actamat.2011.04.018	journal	August 2011
Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium Stebner, A. P.; Brown, D. W.; Brinson, L. C. Acta Materialia, Vol. 61, Issue 6 https://doi.org/10.1016/j.actamat.2012.12.015	journal	April 2013
An in situ neutron diffraction study of shape setting shape memory NiTi Benafan, O.; Padula, S. A.; Noebe, R. D. Acta Materialia, Vol. 61, Issue 10 https://doi.org/10.1016/j.actamat.2013.02.040	journal	June 2013
Temperature dependent deformation of the B2 austenite phase of a NiTi shape memory alloy Benafan, O.; Noebe, R. D.; Padula, S. A. International Journal of Plasticity, Vol. 51 https://doi.org/10.1016/j.ijplas.2013.06.003	journal	December 2013
Martensite evolution in a NiTi shape memory alloy when thermal cycling under an applied load Jones, N. G.; Dye, D. Intermetallics, Vol. 19, Issue 10 https://doi.org/10.1016/j.intermet.2011.03.032	journal	October 2011
Mechanical and functional behavior of a Ni-rich Ni50.3Ti29.7Hf20 high temperature shape memory alloy Benafan, O.; Garg, A.; Noebe, R. D. Intermetallics, Vol. 50 https://doi.org/10.1016/j.intermet.2014.02.006	journal	July 2014
Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction Stebner, A. P.; Vogel, S. C.; Noebe, R. D. Journal of the Mechanics and Physics of Solids, Vol. 61, Issue 11 https://doi.org/10.1016/j.jmps.2013.05.008	journal	November 2013
In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress Šittner, P.; Lukáš, P.; Novák, V. Materials Science and Engineering: A, Vol. 378, Issue 1-2 https://doi.org/10.1016/j.msea.2003.09.112	journal	July 2004
In-situ measurement of texture and elastic strains with HIPPO–CRATES Hartig, Ch.; Vogel, S. C.; Mecking, H. Materials Science and Engineering: A, Vol. 437, Issue 1 https://doi.org/10.1016/j.msea.2006.04.070	journal	November 2006
VULCAN—The engineering diffractometer at the SNS Wang, X. -L.; Holden, T. M.; Rennich, G. Q. Physica B: Condensed Matter, Vol. 385-386 https://doi.org/10.1016/j.physb.2006.06.103	journal	November 2006
Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime Benafan, O.; Noebe, R. D.; Padula, S. A. Scripta Materialia, Vol. 68, Issue 8 https://doi.org/10.1016/j.scriptamat.2012.11.042	journal	April 2013
Thermoelastic and texture behavior of aluminum at high pressure and high temperature investigated by in situ neutron diffraction He, Duanwei; Zhao, Yusheng; Daemen, L. L. Journal of Applied Physics, Vol. 95, Issue 9 https://doi.org/10.1063/1.1688460	journal	May 2004
Measurement of the lattice plane strain and phase fraction evolution during heating and cooling in shape memory NiTi Qiu, S.; Krishnan, V. B.; Padula, S. A. Applied Physics Letters, Vol. 95, Issue 14 https://doi.org/10.1063/1.3245308	journal	October 2009
Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer Woodruff, T. R.; Krishnan, V. B.; Clausen, B. Review of Scientific Instruments, Vol. 81, Issue 6 https://doi.org/10.1063/1.3436637	journal	June 2010
A versatile automated sample changer for texture measurements on the high pressure-preferred orientation neutron diffractometer Reiche, H. M.; Vogel, S. C. Review of Scientific Instruments, Vol. 81, Issue 9 https://doi.org/10.1063/1.3485035	journal	September 2010
Role of B19′ martensite deformation in stabilizing two-way shape memory behavior in NiTi Benafan, O.; Padula, S. A.; Noebe, R. D. Journal of Applied Physics, Vol. 112, Issue 9 https://doi.org/10.1063/1.4764313	journal	November 2012
Thermo-mechanical characterization of shape memory alloy torque tube actuators Keefe, Andrew C.; Carman, Gregory P. Smart Materials and Structures, Vol. 9, Issue 5 https://doi.org/10.1088/0964-1726/9/5/311	journal	September 2000
High-pressure neutron-diffraction study of the metallization process in PrNi O 3 Medarde, M.; Mesot, J.; Lacorre, P. Physical Review B, Vol. 52, Issue 13 https://doi.org/10.1103/PhysRevB.52.9248	journal	October 1995
A profile refinement method for nuclear and magnetic structures Rietveld, H. M. Journal of Applied Crystallography, Vol. 2, Issue 2, p. 65-71 https://doi.org/10.1107/S0021889869006558	journal	June 1969
Smart wing shape memory alloy actuator design and performance Jardine, A. Peter; Flanagan, John S.; Martin, Christopher A. Smart Structures and Materials '97, SPIE Proceedings https://doi.org/10.1117/12.274685	conference	May 1997
Introduction to the Characterization of Residual Stress by Neutron Diffraction Hutchings, M. T.; Withers, P. J.; Holden, T. M. https://doi.org/10.1201/9780203402818	book	January 2005
First Results from the VULCAN Diffractometer at the SNS Wang, X. L.; Holden, Thomas; Stoica, A. D. Materials Science Forum, Vol. 652 https://doi.org/10.4028/www.scientific.net/MSF.652.105	journal	May 2010

Similar Records

Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Journal Article · Wed Oct 01 00:00:00 EDT 2014 · Review of Scientific Instruments · OSTI ID:22305925

First in-situ lattice strains measurements under load at VULCAN

Journal Article · Fri Dec 31 23:00:00 EST 2010 · Metallurgical and Materials Transactions A · OSTI ID:1001721

Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer

Journal Article · Tue Jun 15 00:00:00 EDT 2010 · Review of Scientific Instruments · OSTI ID:22053762

Related Subjects

42 ENGINEERING

Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Citation Formats

References (27)

Similar Records

Related Subjects