Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Implementing Nonlinear Buoyancy and Excitation Forces in the WEC-Sim Wave Energy Converter Modeling Tool: Preprint

Conference ·

Wave energy converters (WECs) are commonly designed and analyzed using numerical models that combine multi-body dynamics with hydrodynamic models based on the Cummins Equation and linearized hydrodynamic coefficients. These modeling methods are attractive design tools because they are computationally inexpensive and do not require the use of high performance computing resources necessitated by high-fidelity methods, such as Navier Stokes computational fluid dynamics. Modeling hydrodynamics using linear coefficients assumes that the device undergoes small motions and that the wetted surface area of the devices is approximately constant. WEC devices, however, are typically designed to undergo large motions in order to maximize power extraction, calling into question the validity of assuming that linear hydrodynamic models accurately capture the relevant fluid-structure interactions. In this paper, we study how calculating buoyancy and Froude-Krylov forces from the instantaneous position of a WEC device (referred to as instantaneous buoyancy and Froude-Krylov forces from herein) changes WEC simulation results compared to simulations that use linear hydrodynamic coefficients. First, we describe the WEC-Sim tool used to perform simulations and how the ability to model instantaneous forces was incorporated into WEC-Sim. We then use a simplified one-body WEC device to validate the model and to demonstrate how accounting for these instantaneously calculated forces affects the accuracy of simulation results, such as device motions, hydrodynamic forces, and power generation.

Research Organization:
National Renewable Energy Laboratory (NREL), Golden, CO.
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy Water Power Technologies Office
DOE Contract Number:
AC36-08GO28308
OSTI ID:
1134119
Report Number(s):
NREL/CP-5000-61529
Country of Publication:
United States
Language:
English

Similar Records

Development and Validation of Passive Yaw in the Open-Source WEC-Sim Code: Preprint
Conference · Sun Nov 08 23:00:00 EST 2020 · OSTI ID:1713281

Development and Validation of Passive Yaw in the Open-Source WEC-Sim Code
Conference · Thu Dec 17 23:00:00 EST 2020 · OSTI ID:1766855

Review of TEAMER Awards for WEC-Sim Support
Conference · Sat Sep 02 00:00:00 EDT 2023 · OSTI ID:2005566