Failure analysis of a fiberglass-reinforced plastic pressure vessel
A fiberglass-reinforced plastic (FRP) pressure vessel containing sulfuric acid failed catastrophically in service. Preliminary investigations ruled out failure due to sabotage and chemical or mechanical overpressure. Subsequent examination of the fiber fracture surfaces and measurements of mirror radii indicated that fiber failure had occurred at stresses significantly below the fibers` expected strength. Further examination by scanning electron microscopy and energy dispersive spectroscopy indicated that the glass fibers had been exposed to sulfuric acid, a reagent that corrodes this type of glass and degrades its strength. Finite element analysis indicated stresses in an exposed region of the vessel that exceeded the strengths of the FRP during normal vessel operation. Numerous cracks were detected in this region using a vicinal optical illumination technique. We concluded that vessel failure was caused by progressive degradation and rupture of fibers starting at the outer surface of the FRP and extending inwards and laterally, until a crack of critical size was produced.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 112934
- Report Number(s):
- SAND--94-3230C; CONF-950739--1; ON: DE95017896
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fiberglass-reinforced necks for liquid nitrogen vessels
Environmentally influenced degradation of fiber-reinforced composites