Micromechanical Behavior of Solid-Solution-Strengthened Mg-1wt.%Al Alloy Investigated by In-Situ Neutron Diffraction

Conference · Wed Jan 01 00:00:00 EST 2014

OSTI ID:1117464

Lee, Sooyeol ^[1]; Woo, Wanchuck ^[2]; Gharghouri, Michael ^[3]; Yoon, Cheol ^[1]; An, Ke ^[4]

---

1. Chungnam National University, South Korea
2. Korea Atomic Energy Research Institute
3. National Research Council of Canada
4. ORNL

In-situ neutron-diffraction experiments were employed to investigate the micromechanical behavior of solid-solution-strengthened Mg-1wt.%Al alloy. Two starting textures were used: 1) as-extruded then solutionized texture, T1, in which the basal poles of most grains are tilted around 70~85 from the extrusion axis, and 2) a reoriented texture, T2, in which the basal poles of most grains are tilted around 10~20 from the extrusion axis. Lattice strains and diffraction peak intensity variations were measured in situ during loading-unloading cycles in uniaxial tension. Twinning activities and stress states for various grain orientations were revealed. The results show that the soft grain orientations, favorably oriented for either extension twinning or basal slip, exhibit the stress relaxation, resulting in the compressive residual strain after unloading. On the other hand, the hard grain orientations, unfavorably oriented for both extension twinning and basal slip, carry more applied load, leading to much higher lattice strains during loading followed by tensile residual strains upon unloading.

• Research Organization: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS)
• Sponsoring Organization: USDOE Office of Science (SC)
• DOE Contract Number: DE-AC05-00OR22725
• OSTI ID: 1117464
• Resource Relation: Conference: MECA SENS 2013, Sydney, Australia, 20130908, 20130908
• Country of Publication: United States
• Language: English