Influence of Cr and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire NiAl composites
- National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center
- Cleveland State Univ., OH (United States). Dept. of Chemical Engineering
Sapphire-reinforced NiAl matrix composites with chromium or tungsten as alloying additions were synthesized using casting and zone directional solidification (DS) techniques and characterized by a fiber pushout test as well as by microhardness measurements. The sapphire-NiAl(Cr) specimens exhibited an interlayer of Cr rich eutectic at the fiber-matrix interface and a higher interfacial shear strength compared to unalloyed sapphire-NiAl specimens processed under identical conditions. In contrast, the sapphire-NiAl(W) specimens did not show interfacial excess of tungsten rich phases, although the interfacial shear strength was high and comparable to that of sapphire-NiAl(Cr). The postdebond sliding stress was higher in sapphire-NiAl(Cr) than in sapphire-NiAl(W) due to interface enrichment with chromium particles. The matrix microhardness progressively decreased with increasing distance from the interface in both DS NiAl and NiAl(Cr) specimens. The study highlights the potential of casting and DS techniques to improve the toughness and strength of NiAl by designing dual-phase microstructures in NiAl alloys reinforced with sapphire fibers.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 109795
- Journal Information:
- Metallurgical Transactions, A, Journal Name: Metallurgical Transactions, A Journal Issue: 8 Vol. 26; ISSN 0360-2133; ISSN MTTABN
- Country of Publication:
- United States
- Language:
- English
Similar Records
Influence of fabrication technique and matrix alloying on the interfacial shear strength of sapphire-NiAl composites
Interfacial shear strength of cast and directionally solidified NiAl-sapphire fiber composites