Electrohydraulic Forming of Near-Net Shape Automotive Panels
- Ford Motor Company, Detroit, MI (United States); Research & Advanced Engineering
The objective of this project was to develop the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures. Pulsed pressure is created via a shockwave generated by the discharge of high voltage capacitors through a pair of electrodes in a liquid-filled chamber. The shockwave in the liquid initiated by the expansion of the plasma channel formed between two electrodes propagates towards the blank and causes the blank to be deformed into a one-sided die cavity. The numerical model of the EHF process was validated experimentally and was successfully applied to the design of the electrode system and to a multi-electrode EHF chamber for full scale validation of the process. The numerical model was able to predict stresses in the dies during pulsed forming and was validated by the experimental study of the die insert failure mode for corner filling operations. The electrohydraulic forming process and its major subsystems, including durable electrodes, an EHF chamber, a water/air management system, a pulse generator and integrated process controls, were validated to be capable to operate in a fully automated, computer controlled mode for forming of a portion of a full-scale sheet metal component in laboratory conditions. Additionally, the novel processes of electrohydraulic trimming and electrohydraulic calibration were demonstrated at a reduced-scale component level. Furthermore, a hybrid process combining conventional stamping with EHF was demonstrated as a laboratory process for a full-scale automotive panel formed out of AHSS material. The economic feasibility of the developed EHF processes was defined by developing a cost model of the EHF process in comparison to the conventional stamping process.
- Research Organization:
- Ford Motor Company, Detroit, MI (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- FG36-08GO18128
- OSTI ID:
- 1094831
- Report Number(s):
- DOE-FORD--GO18128
- Country of Publication:
- United States
- Language:
- English
Similar Records
Electrohydraulic Forming of Near-Net Shape Automotive Panels - Final CRADA Report
Electrohydraulic Forming of Sheet Metal for Structural Automotive Applications - PNNL CRADA 258 Project Letter Agreement 1
Electrohydraulic Forming of Near Net Shape Automotive Panels
Technical Report
·
Fri Aug 10 00:00:00 EDT 2012
·
OSTI ID:1048654
Electrohydraulic Forming of Sheet Metal for Structural Automotive Applications - PNNL CRADA 258 Project Letter Agreement 1
Technical Report
·
Mon Nov 28 23:00:00 EST 2011
·
OSTI ID:1033249
Electrohydraulic Forming of Near Net Shape Automotive Panels
Program Document
·
Wed Dec 31 23:00:00 EST 2008
·
OSTI ID:1218723