Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Upward-facing Lithium Flash Evaporator for NSTX-U

Conference ·
OSTI ID:1088029

NSTX plasma performance has been significantly enhanced by lithium conditioning [1]. To date, the lower divertor and passive plates have been conditioned by downward facing lithium evaporators (LITER) as appropriate for lower null plasmas. The higher power operation expected from NSTX-U requires double null plasma operation in order to distribute the heat flux between the upper and lower divertors making it desirable to coat the upper divertor region with Li as well. An upward aiming LITER (U-LITER) is presently under development and will be inserted into NSTX-U using a horizontal probe drive located in a 6" upper midplane port. In the retracted position the evaporator will be loaded with up to 300 mg of Li granules utilizing one of the calibrated NSTX Li powder droppers[2]. The evaporator will then be inserted into the vessel in a location within the shadow of the RF limiters and will remain in the vessel during the discharge. About 10 seconds before a discharge, it will be rapidly heated and the lithium completely evaporated onto the upper divertor, thus avoiding the complication of a shutter that prevents evaporation during the shot when the diagnostic shutters are open. The minimal time interval between the evaporation and the start of the discharge will avoid the passivation of the lithium by residual gases and enable the study of the conditioning effects of un-passivated Li surfaces [3]. Two methods are being investigated to accomplish the rapid (few second) heating of the lithium. A resistive method relies on passing a large current through a Li filled crucible. A second method requires using a 3 kW e-beam gun to heat the Li. In this paper the evaporator systems will be described and the pros and cons of each heating method will be discussed.

Research Organization:
Princeton Plasma Physics Laboratory (PPPL), Princeton, NJ (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
OSTI ID:
1088029
Report Number(s):
PPPL-4926
Country of Publication:
United States
Language:
English

Similar Records

Lithium Coatings on NSTX Plasma Facing Components and Its Effects On Boundary Control, Core Plasma Performance, and Operation
Conference · Sun Jan 24 23:00:00 EST 2010 · OSTI ID:971203

Lithium coatings on NSTX plasma facing components and its effects on boundary control, core plasma performance, and operation
Journal Article · Thu Dec 31 23:00:00 EST 2009 · Fusion Engineering and Design · OSTI ID:1081808

Evaporated Lithium Surface Coatings in NSTX
Conference · Thu Apr 09 00:00:00 EDT 2009 · Journal of Nuclear Materials (May 2008) · OSTI ID:953205