Percolation in a Proton Exchange Membrane Fuel Cell Catalyst Layer
Water management in the catalyst layers of proton exchange membrane fuel cells (PEMFC) is confronted by two issues, flooding and dry out, both of which result in improper functioning of the fuel cell and lead to poor performance and degradation. At the present time, the data that has been reported about water percolation and wettability within a fuel cell catalyst layer is limited. A method and apparatus for measuring the percolation pressure in the catalyst layer has been developed based upon an experimental apparatus used to test water percolation in porous transport layers (PTL). The experimental setup uses a pseudo Hele-Shaw type testing where samples are compressed and a fluid is injected into the sample. Testing the samples gives percolation pressure plots which show trends in increasing percolation pressure with an increase in flow rate. A decrease in pressure was seen as percolation occurred in one sample, however the pressure only had a rising effect in the other sample.
- Research Organization:
- Ballard Power Systems, Burnaby, BC
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- EE0000466
- OSTI ID:
- 1084695
- Report Number(s):
- DOE/E0000466-10
- Journal Information:
- ECS Transactions, Vol. 50, Issue 2; Conference: 222nd ECS Meeting, Honolulu, Hawai’I, October 7-12, 2012
- Country of Publication:
- United States
- Language:
- English
Similar Records
WaterTransport in PEM Fuel Cells: Advanced Modeling, Material Selection, Testing and Design Optimization
Effects of various parameters of different porous transport layers in proton exchange membrane water electrolysis