Thermal Engineering of Lignin for Low-cost Production of Carbon Fiber
- ORNL
Lignin, a sustainable, renewable resource material, is being evaluated for the low cost production of carbon fiber for automotive and other applications. We previously reported the successful production of carbon fiber from a solvent extracted lignin [1] and from other lignins [2]. However, it was found that the lignin fiber, produced by the melt spinning of the solvent extracted lignin, was difficult to stabilize (i.e., render infusible) and thus carbonize. The long stabilization time, due to the fiber s low Tg, led to the conclusion that thermal engineering of a lignin feedstock could ultimately raise the Tg of the lignin and thereby of the spun fiber. This would permit a higher temperature of stabilization, which would reduce stabilization time as well as overall processing times. The thermally-engineered lignins were evaluated in terms of their rheological properties, melt spinning ability, morphology, stabilization and carbonization properties, and ultimately mechanical properties of the carbon fibers obtained.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Shared Research Equipment Collaborative Research Center
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- DE-AC05-00OR22725
- OSTI ID:
- 1081633
- Resource Relation:
- Conference: The Fiber Society Fall Technical Conference 2009, Athens, GA, USA, 20091027, 20091030
- Country of Publication:
- United States
- Language:
- English
Similar Records
Melt-Spun PAN Precursor for Cost-Effective Carbon Fibers in High Pressure Compressed Gas Tankage
Conversion of lignin precursors to carbon fibers with nanoscale graphitic domains