Design Evaluation Process for Existing Waste Removal Design Documents
This document provides guidelines for implementing Engineering`s responsibility relating to evaluating the adequacy of existing project design outputs. At this time, there exists design documents that were prepared and approved for modifications to operating facilities, that may or may not have been constructed, but have never been turned over to the Operating Facility Management. The process described herein describes the methodology to perform an evaluation of these existing designs and document the findings. The key elements in this process are (1) to evaluate the existing design for general adequacy of the design, (2) to evaluate the existing design due to changes subsequent to the issuance of the documents (i.e. lessons learned, codes or standards change, changes to input documents, ect.), and (3) to verify the existence of critical supporting documentation in the areas of personnel safety, facility safety or environmental compliance.
- Research Organization:
- Westinghouse Savannah River Co., Aiken, SC (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC09-89SR18035
- OSTI ID:
- 108071
- Report Number(s):
- WSRC-TR--95-0230; ON: DE96060006
- Country of Publication:
- United States
- Language:
- English
Similar Records
Engineering design guidelines for nuclear criticality safety
Engineering design guidelines for nuclear criticality safety