Mixtures of SF6 CO2 as working fluids for geothermal power plants

Journal Article · Tue Jan 01 00:00:00 UTC 2013 · Applied Energy

DOI:https://doi.org/10.1016/j.apenergy.2013.01.060· OSTI ID:1068734

Yin, Hebi ^[1]; Sabau, Adrian S ^[1]; Conklin, Jim ^[1]; McFarlane, Joanna ^[1]; Qualls, A L ^[1]

---

1. ORNL

In this paper, supercritical/transcritical thermodynamic cycles using mixtures of SF6 CO2 as working fluids were investigated for geothermal power plants. The system of equations that described the thermodynamic cycle was solved using a Newton-Raphson method. This approach allows a high computational efficiency even when thermophysical properties of the working fluid depend strongly on the temperature and pressure. The thermophysical properties of the mixtures were obtained from National Institute of Standards and Technology (NIST) REFPROP software and constituent cubic equations. The local heat transfer coefficients in the heat exchangers were calculated based on the local properties of the working fluid, geothermal brine, and cooling water. The heat exchanger areas required were calculated. Numerical simulation results presented for different cycle configurations were used to assess the effects of the SF6 fraction in CO2, brine temperature, and recuperator size on the cycle thermal efficiency, and size of heat exchangers for the evaporator and condenser. Optimal thermodynamic cycle efficiencies were calculated to be approximately 13 and 15% mole content of SF6 in a CO2- SF6 mixture for a Brayton cycle and a Rankine cycle, respectively.

• Research Organization: Oak Ridge National Laboratory (ORNL)
• Sponsoring Organization: EE USDOE - Office of Energy Efficiency and Renewable Energy (EE)
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 1068734
• Journal Information: Applied Energy, Journal Name: Applied Energy Journal Issue: 6 Vol. 106; ISSN 0306-2619
• Country of Publication: United States
• Language: English