Delayed Frost Growth on Jumping-Drop Superhydrophobic Surfaces

Journal Article · Tue Jan 01 04:00:00 EST 2013 · ACS Nano

DOI:https://doi.org/10.1021/nn3055048· OSTI ID:1067305

Boreyko, Jonathan B ^[1]; Collier, Pat ^[1]

---

1. ORNL

Self-propelled jumping drops are continuously removed from a condensing superhydrophobic surface to enable a micrometric steady-state drop size. Here, we report that subcooled condensate on a chilled superhydrophobic surface are able to repeatedly jump off the surface before heterogeneous ice nucleation occurs. Frost still forms on the superhydrophobic surface due to ice nucleation at neighboring edge defects, which eventually spreads over the entire surface via an inter-drop frost wave. The growth of this inter-drop frost front is shown to be up to three times slower on the superhydrophobic surface compared to a control hydrophobic surface, due to the jumping-drop effect dynamically minimizing the average drop size and surface coverage of the condensate. A simple scaling model is developed to relate the success and speed of inter-drop ice bridging to the drop size distribution. While other reports of condensation frosting on superhydrophobic surfaces have focused exclusively on liquid-solid ice nucleation for isolated drops, these findings reveal that the growth of frost is an inter-drop phenomenon that is strongly coupled to the wettability and drop size distribution of the surface. A jumping-drop superhydrophobic condenser was found to be superior to a conventional dropwise condenser in two respects: preventing heterogeneous ice nucleation by continuously removing subcooled condensate, and delaying frost growth by minimizing the success of interdrop ice bridge formation.

• Research Organization: Oak Ridge National Laboratory (ORNL); Center for Nanophase Materials Sciences
• Sponsoring Organization: SC USDOE - Office of Science (SC)
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 1067305
• Journal Information: ACS Nano, Journal Name: ACS Nano Journal Issue: 2 Vol. 7; ISSN 1936-0851
• Country of Publication: United States
• Language: English