Microstructure selection maps for Al-Fe alloys
- Ecole Polytechniques Federale de Lausanne (Switzerland). Departement des Materiaux
The solidification microstructures for Al-0.5-4 at.% Fe alloys under constrained growth conditions have been calculated using analytical models of the growth kinetics of dendritic, eutectic and plane front interface morphologies of stable and metastable phases. Laser remelting experiments are carried out on an Al-4 at.% Fe alloy with low beam velocity (10 mm/s) in order to complete previous experimental results on the solidification microstructures obtained at intermediate growth rates by Bridgman experiments and at a high growth rates by rapid laser resolidification. Comparison of predicted with experimentally determined solidification microstructure maps shows satisfactory agreement in view of the limited knowledge of the thermophysical properties of this system. These maps are useful for the interpretation of microstructures and phases forming under medium to high solidification rates and for the understanding and development of rapid solidification processing. Further the modeling is useful for improving available phase diagram information.
- OSTI ID:
- 105989
- Journal Information:
- Acta Metallurgica et Materialia, Journal Name: Acta Metallurgica et Materialia Journal Issue: 9 Vol. 43; ISSN 0956-7151; ISSN AMATEB
- Country of Publication:
- United States
- Language:
- English
Similar Records
Rapidly solidified Al-Cu alloys. 2: Calculation of the microstructure selection map
Rapidly solidified Al-Cu alloys--1--Experimental determination of the microstructure selection map