FY2012 Status Report on Subgroup Library Development

Technical Report · Sun Sep 30 00:00:00 UTC 2012

DOI:https://doi.org/10.2172/1054873· OSTI ID:1054873

Smith, M. A. ^[1]; Lee, C. H. ^[1]; Yesilyurt, G. ^[1]

---

1. Argonne National Laboratory (ANL), Argonne, IL (United States)

The goal of SHARP is to develop a suite of modern simulation tools for use on all reactor types of interest. Part of that desire is to build a heterogeneous neutron transport capability which gives accurate, detailed power distributions throughout the entire reactor core, of which we have focused our efforts on deterministic methodologies. The existing SHARP neutronics tool has demonstrated good accuracy when using conventional homogeneous modeling, but when applied on fully heterogeneous problems such as the Advanced Test Reactor (ATR) and Zero Power Reactors (ZPR), the results were not acceptable. These errors are primary attributable to the use of a three step cross section generation procedure (unit cell, lattice, and whole core). Given the success of the DeCART tool on thermal spectrum systems such as PWR, BWR, and VHTR, the subgroup methodology was identified as a potential means by which to resolve the cross section related problems in the NEAMS tools. The subgroup project in NEAMS is thus focused on creating a general purpose cross section methodology that is usable on both thermal and fast spectrum systems. The subgroup methodology is a well studied scheme appearing very early in the nuclear engineering literature. We investigated using the subgroup methodology as a potential means to handle fast reactor problems. A considerable amount of work was performed on the subgroup library software for NEAMS where several subgroup formulations were investigated. Further, while the subgroup method has been demonstrated to be accurate enough on several problems via our own experiences with DeCART, it is not clear what its accuracy will be on more complicated problems such as the ATR. In any case, one must have a capability to generate a library in which subgroup parameters can cover neutron spectrum characteristics of the reactor of interest. For better accuracy, we propose to use MCNP as an alternative pin-cell calculation means of generating the subgroup data and have developed a prototype code package to demonstrate the capability. With regard to fast spectrum systems, there are numerous concerns with the subgroup methodology in which the conventional Bondarenko iteration approach often used would not accurately handle the resonance interference effect that becomes more complex and important in a fast reactor. An alternative methodology involving the local escape cross section looks promising, but substantial research needs to be completed and a basic algorithm tested before success can be confirmed. Overall, the creation of a subgroup library application was not finished, primarily due to the fact that a bulk of the funding was moved into the next fiscal year. A better understanding of the underlying methodology was gained and a means by which to generate subgroup data was created. The work on the subgroup method for an

• Research Organization: Argonne National Laboratory (ANL), Argonne, IL (United States)
• Sponsoring Organization: USDOE Office of Nuclear Energy (NE)
• DOE Contract Number: AC02-06CH11357
• OSTI ID: 1054873
• Report Number(s): ANL/NE--12-45
• Country of Publication: United States
• Language: ENGLISH