skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Metal Monolithic Amine-grafted Zeolite for CO{sub 2} Capture

Technical Report ·
DOI:https://doi.org/10.2172/1052998· OSTI ID:1052998

The solid amine sorbent for CO{sub 2} capture process has advantages of simplicity and low operating cost compared to the MEA (monoethanolamine) process. Solid amine sorbents reported so far suffered from either low CO{sub 2} capture capacity or low stability. The solid amine sorbent developed in this project exhibited more than 3.2 mmol/g and degraded less than 10% even after 500 cycles of heating and cooling in absence of steam. The presence of steam further enhanced CO{sub 2} capture capacity. The cost of the sorbent is estimated to be less than $7.00/lb. This sorbent was developed using the results of in situ infrared spectroscopic study. Infrared results showed that CO{sub 2} adsorbs on TEPA (tetraethylenepentamine)/PEG (polyethylene glycol) as carbamates and bicarbonates. The CO{sub 2} adsorption capacity and oxidation resistance of the amine sorbent can be enhanced by the interactions between NH{sub 2} of TEPA molecules with the OH group of PEG molecules. PEG was also found to be effectively disperse and immobilize the aromatic amines for SO{sub 2} adsorption. The infrared study also showed that SiO{sub 2} is a significantly better support than zeolites due to its proper hydrophobicity. The results of this study led to the development of a high performance solid amine sorbent under simulated gas flow condition in a fixed bed, a fluidized bed, and a metal monolith unit. This study showed heat transfer could become a major technical issue in scaling up a fixed bed adsorber. The use of the fluidized bed and metal monoliths can alleviate the heat transfer issue. The metal monolith could be suitable for small scale applications due to the high cost of manufacturing; the fluidized bed mode would be most suitable for large scale applications. Preliminary economic analysis suggested that the Akron solid amine process would cost 45% less than that of MEA process.

Research Organization:
The University Of Akron, Akron, OH (United States). Department of Bio-Molecular and Chemical Engineering
Sponsoring Organization:
USDOE
DOE Contract Number:
FC26-07NT43086
OSTI ID:
1052998
Country of Publication:
United States
Language:
English

Similar Records

Bench Scale Development and Testing of Aerogel Sorbents for CO2 Capture Final Technical Report
Technical Report · Thu Mar 30 00:00:00 EDT 2017 · OSTI ID:1052998

Evaluation of Solid Sorbents As A Retrofit Technology for CO{sub 2} Capture from Coal-Fired Power Plants
Technical Report · Sun Jul 31 00:00:00 EDT 2011 · OSTI ID:1052998

SO2-Resistant Immobilized Amine Sorbents for CO2 Capture
Technical Report · Wed Jan 01 00:00:00 EST 2014 · OSTI ID:1052998