Irradiation dose and temperature dependence of fracture toughness in high dose HT9 steel from the fuel duct of FFTF

Journal Article · Tue Jan 01 04:00:00 EST 2013 · Journal of Nuclear Materials

DOI:https://doi.org/10.1016/j.jnucmat.2012.07.019· OSTI ID:1052249

Byun, Thak Sang ^[1]; Toloczko, M ^[2]; Maloy, S ^[3]

---

1. ORNL
2. Pacific Northwest National Laboratory (PNNL)
3. Los Alamos National Laboratory (LANL)

Static fracture toughness tests have been performed for high dose HT9 steel using miniature disk compact tension (DCT) specimens to expand the knowledge base for fast reactor core materials. The HT9 steel DCT specimens were from the ACO-3 duct of the Fast Flux Test Facility (FFTF), which achieved high doses in the range of 3 148 dpa at 378 504oC. The static fracture resistance (J-R) tests have been performed in a servohydraulic testing machine in vacuum at selected temperatures including room temperature, 200 C, and each irradiation temperature. Brittle fracture with a low toughness less than 50 MPa m occurred in room temperature tests when irradiation temperature was below 400 C, while ductile fracture with stable crack growth was observed in all tests at higher irradiation temperatures. No fracture toughness less than 100 MPa m was measured when the irradiation temperature was above 430 C. It was shown that the influence of irradiation temperature was dominant in fracture toughness while the irradiation dose has only limited influence over the dose range 3 148 dpa. A post upper-shelf behavior was observed for the non-irradiated and high temperature (>430 C) irradiation cases, which indicates that the ductile-brittle transition temperatures (DBTTs) in those conditions are lower than room temperature. A comparison with the collection of existing data confirmed the dominance of irradiation temperature in the fracture toughness of HT9 steels.

• Research Organization: Oak Ridge National Laboratory (ORNL)
• Sponsoring Organization: NE USDOE - Office of Nuclear Energy
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 1052249
• Journal Information: Journal of Nuclear Materials, Journal Name: Journal of Nuclear Materials Journal Issue: 1-3 Vol. 432; ISSN 0022-3115
• Country of Publication: United States
• Language: English