Application of the Split Hopkinson Resonant Bar Test for Seismic Property Characterization of Hydrate-bearing Sand Undergoing Water Saturation
- Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Conventional resonant bar tests allow the measurement of seismic properties of rocks and sediments at low frequencies (several kilohertz). However, the tests require a long, slender sample which is often difficult to obtain from the deep subsurface and weak and fractured formations. We present an alternative low-frequency measurement technique to the conventional resonant bar tests. This technique involves a jacketed core sample placed between a pair of long, metal extension rods with attached seismic source and receiver—the same geometry as the split Hopkinson pressure bar test for large-strain, dynamic impact experiments. Because of the added length and mass to the sample, the resonance frequency of the entire system can be lowered significantly, compared to the sample alone. The proposed “Split Hopkinson Resonant Bar (SHRB)” test is applied in two steps. In the first step, extension and torsion-mode resonance frequencies and attenuation of the system are measured. Then, numerical inversions for the compressional and shear wave velocities and attenuation are performed. We initially applied the SHRB test to synthetic materials (plastics) for testing its accuracy, then used it for measuring the seismic velocities and attenuation of a rock core containing supercritical CO{sub 2}, and a sediment core while methane hydrate formed in the pore space.
- Research Organization:
- Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), Basic Energy Sciences (BES). Chemical Sciences, Geosciences & Biosciences Division (CSGB)
- DOE Contract Number:
- AC02-05CH11231
- OSTI ID:
- 1052176
- Report Number(s):
- LBNL--5235E
- Country of Publication:
- United States
- Language:
- English
Similar Records
Split Hopkinson Resonant Bar Test for Sonic-Frequency Acoustic Velocity and Attenuation Measurements of Small, Isotropic Geologic Samples
A Split Hopkinson Bar Technique to Determine Compressive Stress-Strain Data for Rock Materials
Application of photon Doppler velocimetry to direct impact Hopkinson pressure bars
Journal Article
·
Fri Apr 01 00:00:00 EDT 2011
· Review of Scientific Instruments
·
OSTI ID:1016577
A Split Hopkinson Bar Technique to Determine Compressive Stress-Strain Data for Rock Materials
Journal Article
·
Sun Jan 23 23:00:00 EST 2000
· Experimental Mechanics
·
OSTI ID:750349
Application of photon Doppler velocimetry to direct impact Hopkinson pressure bars
Journal Article
·
Sun Feb 14 23:00:00 EST 2016
· Review of Scientific Instruments
·
OSTI ID:22482846