Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Design of Small Impact-Resistant RTGs for Global Network of Unmanned Mars Landers

Technical Report ·
DOI:https://doi.org/10.2172/1033419· OSTI ID:1033419
 [1]
  1. Fairchild Space Company, Germantown, MD (United States)

Ongoing studies by the National Aeronautics and Space Administration (NASA) for the robotic exploration of Mars contemplate a network of at least twenty small and relatively inexpensive landers distributed over both low and high latitudes of the Martian globe. They are intended to explore the structural, mineralogical, and chemical characteristics of the Martian soil, search for possible subsurface trapped ice, and collect long-term seismological and meteorological data over a period of ten years. They can also serve as precursors for later unmanned and manned Mars missions.; The collected data will be transmitted periodically, either directly to Earth or indirectly via an orbiting relay. The choice of transmission will determine the required power, which is currently expected to be between 2 and 12 watts(e) per lander. This could be supplied either by solar arrays or by Radioisotope Thermoelectric Generators (RTGs). Solar-powered landers could only be used for low Martian latitudes, but RTG-powered landers can be used for both low and high latitudes. Moreover, RTGs are less affected by Martian sandstorms and can be modified to resist high-G-load impacts. High impact resistance is a critical goal. It is desired by the mission designers, to minimize the mass and complexity of the system needed to decelerate the landers to a survivable impact velocity. To support the NASA system studies, the U.S. Department of Energy's Office of Special Applications (DOE/OSA) asked Fairchild to perform RTG design studies for this mission. The key problem in designing these RTGs is how to enable the generators to tolerate substantially higher G-loads than those encountered on previous RTG missions. The Fairchild studies resulted in designs of compact RTGs based on flight-proven and safety-qualified heat source components, with a number of novel features designed to provide the desired high impact tolerance. The present paper describes those designs and their rationale, and a preliminary, quasistatic impact analysis that yielded very encouraging result.

Research Organization:
Fairchild Space Company, Germantown, MD (United States)
Sponsoring Organization:
USDOE Office of Nuclear Energy (NE), Office of Space and Defense Power Systems (NE-75)
OSTI ID:
1033419
Report Number(s):
FSC-ESD--217-91-495; Orbital ID: 10295; Call Number: 40-02
Country of Publication:
United States
Language:
English

Similar Records

RTG Impact Response to Hard Landing During Mars Environmental Survey (MESUR) Mission
Technical Report · Thu Mar 05 19:00:00 EST 1992 · OSTI ID:1033417

Design of Small Impact-Resistant RTGs for Global Network of Unmanned Mars Landers
Technical Report · Mon Sep 30 20:00:00 EDT 1991 · OSTI ID:1033350

PbTe/TAGS RTG Mars Environmental Survey (MESUR) mission
Conference · Sat Jan 09 23:00:00 EST 1993 · AIP Conference Proceedings (American Institute of Physics); (United States) · OSTI ID:6547412