MODELING ANALYSIS FOR GROUT HOPPER WASTE TANK
The Saltstone facility at Savannah River Site (SRS) has a grout hopper tank to provide agitator stirring of the Saltstone feed materials. The tank has about 300 gallon capacity to provide a larger working volume for the grout nuclear waste slurry to be held in case of a process upset, and it is equipped with a mechanical agitator, which is intended to keep the grout in motion and agitated so that it won't start to set up. The primary objective of the work was to evaluate the flow performance for mechanical agitators to prevent vortex pull-through for an adequate stirring of the feed materials and to estimate an agitator speed which provides acceptable flow performance with a 45{sup o} pitched four-blade agitator. In addition, the power consumption required for the agitator operation was estimated. The modeling calculations were performed by taking two steps of the Computational Fluid Dynamics (CFD) modeling approach. As a first step, a simple single-stage agitator model with 45{sup o} pitched propeller blades was developed for the initial scoping analysis of the flow pattern behaviors for a range of different operating conditions. Based on the initial phase-1 results, the phase-2 model with a two-stage agitator was developed for the final performance evaluations. A series of sensitivity calculations for different designs of agitators and operating conditions have been performed to investigate the impact of key parameters on the grout hydraulic performance in a 300-gallon hopper tank. For the analysis, viscous shear was modeled by using the Bingham plastic approximation. Steady state analyses with a two-equation turbulence model were performed. All analyses were based on three-dimensional results. Recommended operational guidance was developed by using the basic concept that local shear rate profiles and flow patterns can be used as a measure of hydraulic performance and spatial stirring. Flow patterns were estimated by a Lagrangian integration technique along the flow paths from the material feed inlet.
- Research Organization:
- Savannah River Site (SRS), Aiken, SC (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- DE-AC09-08SR22470
- OSTI ID:
- 1032624
- Report Number(s):
- SRNL-STI-2012-00004; TRN: US1200526
- Resource Relation:
- Conference: 2012 International Congress on the Advances in Nuclear Power Plants
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modeling analysis for grout hopper waste tank
ELAWD GROUT HOPPER MOCK-UP TESTING
Related Subjects
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS
CAPACITY
COMPUTERIZED SIMULATION
FLUID MECHANICS
GROUTING
HOPPERS
HYDRAULICS
LAGRANGIAN FUNCTION
NUCLEAR POWER PLANTS
PERFORMANCE
PLASTICS
RADIOACTIVE WASTES
SAVANNAH RIVER PLANT
SENSITIVITY
SHEAR
STIRRING
TANKS
TURBULENCE
VELOCITY
WASTES