Rf System for the NLCTA
This paper describes an X-Band RF system for the Next Linear Collider Test Accelerator. The RF system consists of a 90 MeV injector and a 540 MeV linac. The main components of the injector are two low-Q single-cavity prebunchers and two 0.9-m-long detuned accelerator sections. The linac system consists of six 1.8-m-long detuned and damped detuned accelerator sections powered in pairs. The rf power generation, compression, delivery, distribution and measurement systems consist of klystrons, SLEDII energy compression systems, rectangular waveguides, magic-T's, and directional couplers. The phase and amplitude for each prebuncher is adjusted via a magic-T type phase shifter/attenuator. Correct phasing between the two 0.9 m accelerator sections is obtained by properly aligning the sections and adjusting two squeeze type phase shifters. Bunch phase and bunch length can be monitored with special microwave cavities and measurement systems. The design, fabrication, microwave measurement, calibration, and operation of the sub-systems and their components are briefly presented.
- Research Organization:
- SLAC National Accelerator Laboratory (SLAC)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC02-76SF00515
- OSTI ID:
- 1023257
- Report Number(s):
- SLAC-REPRINT-2011-018
- Journal Information:
- Conf.Proc.C970512:3042,1997, Journal Name: Conf.Proc.C970512:3042,1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
High gradient experiments on NLCTA accelerator structures
A high current injector for the Boeing Radiation Laboratory FEL experiment