Remotely Operated Equipment for Post Irradiation Examination of the SNS Target Vessel
Conference
·
OSTI ID:1021994
- ORNL
The Spallation Neutron Source produces neutrons by accelerating protons into flowing mercury contained inside a stainless steel target vessel. During facility operation the target vessel is degraded by a combination of high-energy neutrons, the proton beam, and cavitation-induced corrosion. The degradation is primarily concentrated at the nose of the target vessel, where the proton beam passes through. Currently, the Spallation Neutron Source has replaced three target vessels and is operating the fourth. To minimize the operational costs of manufacturing and disposing of target vessels, efforts are underway to increase the operational lifetimes of the target vessels by conducting post irradiation examinations of spent vessels. This examination involves remotely removing multiple coupons from the nose of the target vessel using a single piece of equipment, called the Nose Sampling Cutter, installed inside the Spallation Neutron Source s hot cell. The Cutter produces circular coupons approximately 2 inches in diameter using a carbide-tipped hole saw. The nose of the target vessel consists of four layers of material, and the Nose Sampling Cutter is capable of cutting through the layers in a single stroke. This remote operation has been successfully completed twice. In addition to the Nose Sampling Cutter, a large reciprocation saw capable of removing a sizable section of the nose of the target vessel has been constructed and tested, but never implemented. To support this large reciprocation saw other equipment has also been designed. The details of the Nose Sampling Cutter, reciprocation saw, and associated equipment are discussed.
- Research Organization:
- Oak Ridge National Laboratory (ORNL); Spallation Neutron Source
- Sponsoring Organization:
- SC USDOE - Office of Science (SC)
- DOE Contract Number:
- AC05-00OR22725
- OSTI ID:
- 1021994
- Country of Publication:
- United States
- Language:
- English
Similar Records
Cavitation-induced erosion in liquid metal spallation targets – A comparison between a predictive method and measured erosion damage to stainless steel target modules at the Spallation Neutron Source
Initial observations of cavitation-induced erosion of liquid metal spallation target vessels at the Spallation Neutron Source
Journal Article
·
Mon Mar 02 19:00:00 EST 2020
· Wear
·
OSTI ID:1606931
Initial observations of cavitation-induced erosion of liquid metal spallation target vessels at the Spallation Neutron Source
Conference
·
Sat Dec 31 23:00:00 EST 2011
·
OSTI ID:1056899