Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Performance of the SSC H{sup {minus}} rf volume ion source and linac injector

Conference ·
OSTI ID:10185961
The Superconducting Super Collider (SSC) ion source is required to provide a 30-mA H{sup {minus}} beam at 35 keV with a normalized rms emittance ({var_epsilon}{sub n-rms}) of less than 0.18 {pi} mm-mrad. An rf-driven volume source was chosen for the commissioning of the SSC linear accelerator (Linac). The divergent ion source output beam is matched into the Radio Frequency Quadrupole accelerator (RFQ) by an electrostatic Low Energy Beam Transport (LEBT). The SSC Linac Injector (consisting of ion source, LEBT, and RFQ) is required to provide 25 mA of H{sup {minus}} beam (pulse width of 9.6--48 {mu}s at 10-Hz repetition rate) at 2.5 MeV with transverse normalized rms emittance ({var_epsilon}{sub t-n-rms}) of less than 0.2 {pi} mm-mrad and longitudinal normalized rms emittance ({var_epsilon}1) of less than 0.82*10{sup {minus}6} eV-s. The performance of our rf volume source and initial experimental results from the SSC Injector are discussed.
Research Organization:
Superconducting Super Collider Lab., Dallas, TX (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
AC35-89ER40486
OSTI ID:
10185961
Report Number(s):
SSCL-Preprint--499; CONF-9308136--6; ON: DE94001093
Country of Publication:
United States
Language:
English

Similar Records

Performance of SSC LINAC Injector
Conference · Sat May 01 00:00:00 EDT 1993 · OSTI ID:10164346

Performance of SSC LINAC Injector
Conference · Sat May 01 00:00:00 EDT 1993 · OSTI ID:7368731

Low-energy injector design for SSC
Journal Article · Tue Mar 31 23:00:00 EST 1992 · Review of Scientific Instruments; (United States) · OSTI ID:7270994