A quick telemanipulator calibration and repeatability method with applications
Conference
·
OSTI ID:10182337
- Oak Ridge National Lab., TN (United States). Robotics & Process Systems Div.
This paper will present a methodology that was used to calibrate and measure the repeatability of two telemanipulators at Oak Ridge National Laboratory. The global accuracy of the method was 0.05 in. ({approx_equal} 1.3 mm), and the orientation accuracy was approximately 6 min ({approx_equal} 0.002 rads). For most teleoperator systems, these accuracies are more than adequate because of the construction of the mechanism and sensor capabilities (e.g., typically 12 bits of resolution). Although industrial robots require accuracies of about 0.05 mm or better, telemanipulators do not.
- Research Organization:
- Oak Ridge National Lab., TN (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 10182337
- Report Number(s):
- CONF-940550-14; ON: DE94018710; TRN: AHC29421%%106
- Resource Relation:
- Conference: Institute of Electrical and Electronics Engineers (IEEE) international conference on robotics,San Diego, CA (United States),8-13 May 1994; Other Information: PBD: [1994]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Human factors in telemanipulation: Perspectives from the Oak Ridge National Laboratory experience
Hidden Markov Model analysis of force/torque information in telemanipulation
Exploiting Task Tolerances in Mimicry-based Telemanipulation
Conference
·
Sat Jan 01 00:00:00 EST 1994
·
OSTI ID:10182337
Hidden Markov Model analysis of force/torque information in telemanipulation
Journal Article
·
Tue Oct 01 00:00:00 EDT 1991
· International Journal of Robotics Research; (United States)
·
OSTI ID:10182337
Exploiting Task Tolerances in Mimicry-based Telemanipulation
Technical Report
·
Fri Mar 31 00:00:00 EDT 2023
·
OSTI ID:10182337