skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Computer modeling of a three-dimensional steam injection experiment

Technical Report ·
DOI:https://doi.org/10.2172/10181442· OSTI ID:10181442
;  [1]
  1. Stanford Univ., CA (United States). Petroleum Research Inst.

The experimental results and CT scans obtained during a steam-flooding experiment with the SUPRI 3-D steam injection laboratory model are compared with the results obtained from a numerical simulator for the same experiment. Simulation studies were carried out using the STARS (Steam and Additives Reservoir Simulator) compositional simulator. The saturation and temperature distributions obtained and heat-loss rates measured in the experimental model at different stages of steam-flooding were compared with those calculated from the numerical simulator. There is a fairly good agreement between the experimental results and the simulator output. However, the experimental scans show a greater degree of gravity override than that obtained with the simulator for the same heat-loss rates. Symmetric sides of the experimental 5-spot show asymmetric heat-loss rates contrary to theory and simulator results. Some utility programs have been written for extracting, processing and outputting the required grid data from the STARS simulator. These are general in nature and can be useful for other STARS users.

Research Organization:
USDOE Bartlesville Project Office, OK (United States); Stanford Univ., CA (United States). Petroleum Research Inst.
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
FG22-93BC14899
OSTI ID:
10181442
Report Number(s):
DOE/BC/14899-2; SUPRI-TR-94; ON: DE93000163
Resource Relation:
Other Information: PBD: Aug 1993
Country of Publication:
United States
Language:
English