Design and fabrication of the uranium drum standards

Conference · Sun Aug 01 04:00:00 EDT 1993

OSTI ID:10177992

Hsue, F; Long, S M; Hsue, S T; Miller, M C

The segmented gamma scanner has become an important instrument for assaying the special nuclear material content of low-density scrap and waste in 55-gal. drums. To perform these assays accurately, we need appropriate standards to calibrate the response of the system including the detector efficiency, the absorber in front of the detector, and the collimator geometry. A set of three uranium drum standards has been fabricated at Los Alamos. This paper discusses a Monte Carlo calculation to optimize the design of the drums. The drum standards are prepared using 20 modular 4-{ell} bottles in each drum. This paper also describes the fabrication procedure, which includes weighing the uranium oxide and the chemical analyzing of the uranium concentration. Also presented is the vertical scanning data of the 4- {ell} bottles to assure uniform mixing of the uranium and the diluent. Finally, the nondestructive measurements for checking consistency among the three drum standards am discussed.

• Research Organization: Los Alamos National Lab., NM (United States)
• Sponsoring Organization: USDOE, Washington, DC (United States)
• DOE Contract Number: W-7405-ENG-36
• OSTI ID: 10177992
• Report Number(s): LA-UR--93-2605; CONF-930749--42; ON: DE93018542
• Country of Publication: United States
• Language: English

Related Subjects

052002
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
CALIBRATION STANDARDS
CONTAINERS
DESIGN
DIATOMACEOUS EARTH
MONTE CARLO METHOD
PERFORMANCE TESTING
PLUTONIUM
RADIATION DETECTORS
RADIOACTIVE WASTE STORAGE
RADIOACTIVE WASTES
URANIUM OXIDES
WASTE DISPOSAL AND STORAGE